Skip to content
CostLocal

Concrete driveway cost in Albany, GA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (600 sq ft)
$2,900 – $7,100
Per sq ft
$4.80 – $11.50
before permit
Versus US midpoint
−22%
US $6,450
Rank of 300 metros
#299
1 = most expensive

If you want to pour a concrete driveway in Albany, plan on $2,900 to $7,100 for 600 sq ft, all in. Per sq ft, that is $4.80 to $11.50 for materials and labor, with the permit on top. The local midpoint runs 22% lower than the national one. Cement masons and concrete finishers earn a median of $17.98 an hour in the Albany area, 34% below the US median of $27.41.

Estimate your concrete driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

5-inch with rebar and saw-cut joints, a border or one color

Add-ons

Estimated cost for 600 sq ft in Albany, GA, standard level

$4,150 to $5,850

About $6.80 to $9.50 per sq ft before permits. Labor is about 61% of the bill.

Cost breakdown
PartLowHigh
Materials$1,600$2,000
Labor$2,450$3,700
Permits and fees$85$140
Total$4,150$5,850
Save and get a PDF report

Cost breakdown for 600 sq ft in Albany, GA

Part of the jobLowMidpointHighShare
Materials$1,350$1,800$2,30036%
Labor$1,550$3,050$4,60061%
Permits and fees$45$110$1802%
Total$2,900$5,000$7,100100%

What is behind the Albany number

Labor is 61% of the midpoint bill here, against 69% nationally. The mix of trades behind this job is cement masons and concrete finishers (50%), construction laborers (30%), operating engineers and other construction equipment operators (10%), carpenters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Albany the blended ratio comes out at 0.70.

On the materials line, the BEA goods price index for the Albany metro is 96.3 (US = 100). The midpoint materials bill for 600 sq ft comes to $1,800, compared with $1,900 at national prices. Permit and inspection fees are scaled by the broader index (87.7) and land at $45 to $180.

Albany labor market for concrete driveway

Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Albany is 0.70 times the national level.

For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $17.98 an hour, which is 34% below the national $27.41. The middle half of them earn between $15.21 and $18.98 an hour. BLS counts 80 of them working in the area, 13.7 for every 10,000 jobs (US: 13.3), so the local bench is about average.

Construction laborers (47-2061), 30% of the weighting: a median of $17.25 an hour, 24% below the US median of $22.66. The middle half of them earn between $14.62 and $18.96 an hour. About 400 work in the metro. That is 68.5 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $21.86 an hour, which is 24% below the national $28.78. The middle half of them earn between $18.48 and $22.50 an hour. BLS counts 260 of them working in the area, 44.5 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

For carpenters (47-2031, weighted 10%) the local median is $18.46 an hour, which is 37% below the national $29.12. The middle half of them earn between $17.38 and $23.55 an hour. BLS counts 80 of them working in the area, 13.7 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($18.98 an hour) instead of the median, the labor line grows by about $80. At the 25th percentile ($15.21) it shrinks by about $220. The total moves by 1.6% or 4.5%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 58,390 jobs in the Albany area. That makes it the 293rd largest of the 300 metros we cover, with 0.04% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$15.21$17.98$18.98$27.410.66metro
Construction laborers (47-2061)30%$14.62$17.25$18.96$22.660.76metro
Operating engineers and other construction equipment operators (47-2073)10%$18.48$21.86$22.50$28.780.76metro
Carpenters (47-2031)10%$17.38$18.46$23.55$29.120.63metro
Blended100%0.70

Planning more than one job in Albany?

Because every project leans on different trades, Albany's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs −10% and concrete patio −18%.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$2,750 – $6,600−10%
Gravel driveway1,000 sq ft$2,150 – $8,800−14%
Concrete slab400 sq ft$2,050 – $4,450−15%
Stamped concrete400 sq ft$2,750 – $6,550−17%
Paver patio300 sq ft$2,550 – $4,600−15%
Concrete patio300 sq ft$1,100 – $3,200−18%

Is Albany cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $5,000 to $5,550 across Albany and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Albany, GAthis page$2,900 – $7,100$5,000
Warner Robins, GA65 miles$3,200 – $7,850$5,550+11%
Columbus, GA70 miles$3,050 – $7,450$5,250+5%
Dothan, AL85 miles$3,000 – $7,350$5,200+4%
Macon, GA85 miles$3,100 – $7,650$5,400+8%
Tallahassee, FL90 miles$3,150 – $7,750$5,450+9%
Georgia (statewide)$3,200 – $7,950$5,600+12%
United States$3,650 – $9,200$6,450+29%

Across 300 US metros, Albany comes in at #299 from the top. The priciest is Kahului, HI at $10,000; the cheapest is McAllen, TX at $4,950 (midpoints, 600 sq ft). Statewide, Albany is 11% below the Georgia figure.

Other Georgia metros

Georgia metros compared with Albany
MetroSizeRangeMidpointvs. here
Atlanta, GA2,889,670 jobs$3,300 – $8,200$5,750+15%
Augusta, GA231,930 jobs$3,200 – $8,000$5,600+12%
Savannah, GA198,360 jobs$3,150 – $7,750$5,450+9%
Columbus, GA116,380 jobs$3,050 – $7,450$5,250+5%
Gainesville, GA103,870 jobs$3,150 – $7,800$5,500+10%
Athens, GA95,800 jobs$3,150 – $7,700$5,400+8%

Cities with a workforce like Albany's

Big cities and small ones price differently, so here is Albany against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Dubuque, IA58,470 jobs$3,600 – $9,200$6,400+28%
Wheeling, WV58,130 jobs$3,700 – $9,450$6,600+32%
Altoona, PA58,650 jobs$3,500 – $8,750$6,150+23%
Sebastian, FL57,620 jobs$3,300 – $8,200$5,750+15%

Climate in Albany: timing your concrete driveway job

We use NOAA's 1991-2020 climate normals for Albany Sw Ga Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

February through May and September through December are the stretches where pouring concrete runs into the fewest weather problems in Albany (8 of 12 months). January has an average overnight low of 40°F or below; June, July and August have an average daytime high of 90°F or more.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Heat matters for concrete as well. With average highs of 90°F or more in June, July and August, crews often start early, wet the base and plan for faster set times.

Albany gets about 47 inches of precipitation in a normal year. The wettest months are June, July and August (5.1 inches in July). Inside the workable window, May and October are the driest, at 2.4 and 2.3 inches. The station averages about 106 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Albany Sw Ga Rgnl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan62394.2Cold
Feb66424.0Workable
Mar73484.4Workable
Apr80543.7Workable
May88632.4Workable
Jun91715.1Hot
Jul93735.1Hot
Aug92734.8Hot
Sep88683.4Workable
Oct81572.3Workable
Nov71462.9Workable
Dec64414.3Workable

Optional extras in Albany

Extras are quoted nationally and then scaled to Albany by the average of the local wage index (0.70) and goods index (0.96), a factor of 0.83. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add rebar reinforcement$500 – $1,500
Remove the old driveway$1,000 – $3,000

Why two Albany quotes can differ

  • Permits and the apron

    A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.

  • Thickness

    HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.

  • Old driveway removal

    Tearing out the old surface adds about $2-$6 per sq ft, and some cities want the haul-off documented.

Cost by quality level and size in Albany

Three bands are cut from the same cited range and localized for Albany wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$2,900 to $4,600

Plain gray, 4-inch broom finish, flat site

Standard

$4,150 to $5,850

5-inch with rebar and saw-cut joints, a border or one color

Premium

$5,400 to $7,100

6-inch for heavy vehicles, stamped or colored, grading needed

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,200 – $1,900$1,700 – $2,400$2,250 – $2,950
2-car (20x24), 480 sq ft$2,350 – $3,700$3,350 – $4,700$4,350 – $5,700
2-car + apron (600 sq ft)$2,900 – $4,600$4,150 – $5,850$5,400 – $7,100
3-car (900 sq ft)$4,350 – $6,800$6,200 – $8,700$8,050 – $10,500

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,150 to $5,850 for Albany, GA is attached.

Detailed concrete driveway report for Albany, GA, $9

Multi-page report for Albany, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete driveway in Albany: your questions

+How much does it cost to pour a concrete driveway in Albany?

For 600 sq ft, expect $2,900 to $7,100 in the Albany area. A standard-spec job lands at $4,150 to $5,850. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for concrete driveway in Albany?

About $4.80 to $11.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $6 to $15.

+Is concrete driveway cheaper in Albany or Warner Robins?

Warner Robins is 65 miles away. The midpoint for 600 sq ft there is $5,550, which is 11% more than Albany ($5,000). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Albany?

About 61% at the midpoint, or $3,050 out of $5,000. Materials are 36% and permits 2%. Nationally, labor is 69%.

+What would 2-car + apron (600 sq ft) cost in Albany?

$2,900 to $7,100. Pick a different size in the estimator above to get your own number.

+Does concrete driveway need a permit in Albany?

Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Albany area (our national range of $50 to $200 scaled by the local price level).

+Is Albany expensive for concrete driveway compared with the rest of Georgia?

Albany is 11% below the Georgia statewide estimate ($5,600 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.

+What do cement masons and concrete finishers earn in Albany?

The BLS median is $17.98 an hour in the Albany area, compared with $27.41 nationally. The 25th to 75th percentile range is $15.21 to $18.98.

+What do basic and premium concrete driveway work cost in Albany?

For 600 sq ft, basic work runs $2,900 to $4,600 and premium work $5,400 to $7,100. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.

+When is the best time to pour a concrete driveway in Albany?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through May and September through December. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add rebar reinforcement" add in Albany?

$500 to $1,500 for 600 sq ft, from a national range scaled by the local wage and goods indexes.

Concrete driveway near Albany

Concrete driveway: all pricesConcrete driveway in GeorgiaAll projects in AlbanyGeorgia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.