Skip to content
CostLocal

Concrete driveway cost in Savannah, GA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (600 sq ft)
$3,150 – $7,750
Per sq ft
$5.15 – $12.50
before permit
Versus US midpoint
−15%
US $6,450
Rank of 300 metros
#266
1 = most expensive

Local price for a concrete driveway in the Savannah area: $3,150 to $7,750 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 15% lower than the US figure. Cement masons and concrete finishers earn a median of $22.04 an hour in the Savannah area, 20% below the US median of $27.41.

Estimate your concrete driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

5-inch with rebar and saw-cut joints, a border or one color

Add-ons

Estimated cost for 600 sq ft in Savannah, GA, standard level

$4,550 to $6,400

About $7.40 to $10.50 per sq ft before permits. Labor is about 64% of the bill.

Cost breakdown
PartLowHigh
Materials$1,600$2,000
Labor$2,800$4,200
Permits and fees$90$150
Total$4,550$6,400
Save and get a PDF report

Cost breakdown for 600 sq ft in Savannah, GA

Part of the jobLowMidpointHighShare
Materials$1,350$1,800$2,30033%
Labor$1,750$3,500$5,25064%
Permits and fees$50$120$1902%
Total$3,150$5,450$7,750100%

What is behind the Savannah number

The wage side of the estimate leans on cement masons and concrete finishers, who do 50% of the hours on a typical job. Their local median is $22.04 an hour. Add the other trades involved and the blended wage index for Savannah is 0.80 (US = 1.00), which puts labor at 64% of the total.

Materials are scaled with BEA's regional price parity for goods. Savannah is at 96.3 against 100 for the US, so a materials line of $1,900 nationally becomes $1,800 here (midpoint, 600 sq ft). Permits follow the all-items index of 95.2: $50 to $190.

The best months for concrete driveway in Savannah

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Savannah Intl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For pouring concrete, the comfortable months in Savannah are February through May and September through December: 8 of 12. Outside them, January has an average overnight low of 40°F or below, and June, July and August have an average daytime high of 90°F or more.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Heat matters for concrete as well. With average highs of 90°F or more in June, July and August, crews often start early, wet the base and plan for faster set times.

Savannah gets about 48 inches of precipitation in a normal year. The wettest months are June, July and August (6.7 inches in June). Inside the workable window, February and November are the driest, at 2.8 and 2.4 inches. The station averages about 81 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Savannah Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan61403.3Cold
Feb65432.8Workable
Mar71493.5Workable
Apr78553.4Workable
May85633.6Workable
Jun90716.7Hot
Jul92745.8Hot
Aug91735.5Hot
Sep86694.3Workable
Oct79593.7Workable
Nov70482.4Workable
Dec64433.2Workable

Cost by quality level and size in Savannah

The cited range is split into basic, standard and premium bands, then scaled to Savannah. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to 3-car (900 sq ft).

Basic

$3,150 to $5,000

Plain gray, 4-inch broom finish, flat site

Standard

$4,550 to $6,400

5-inch with rebar and saw-cut joints, a border or one color

Premium

$5,900 to $7,750

6-inch for heavy vehicles, stamped or colored, grading needed

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,300 – $2,050$1,850 – $2,650$2,450 – $3,200
2-car (20x24), 480 sq ft$2,550 – $4,000$3,650 – $5,150$4,750 – $6,250
2-car + apron (600 sq ft)$3,150 – $5,000$4,550 – $6,400$5,900 – $7,750
3-car (900 sq ft)$4,700 – $7,450$6,750 – $9,500$8,800 – $11,600

How Savannah compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $5,450 to $5,950 across Savannah and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Savannah, GAthis page$3,150 – $7,750$5,450
Hilton Head, SC30 miles$3,350 – $8,400$5,850+8%
Charleston, SC95 miles$3,400 – $8,500$5,950+9%
Augusta, GA100 miles$3,200 – $8,000$5,600+3%
Jacksonville, FL135 miles$3,300 – $8,300$5,800+6%
Columbia, SC135 miles$3,300 – $8,300$5,800+6%
Georgia (statewide)$3,200 – $7,950$5,600+2%
United States$3,650 – $9,200$6,450+18%

Out of the 300 metros we cover, Savannah ranks #266 for the cost of this job (#1 is the most expensive). Statewide, Savannah is 2% below the Georgia figure.

Elsewhere in Georgia

Georgia metros compared with Savannah
MetroSizeRangeMidpointvs. here
Atlanta, GA2,889,670 jobs$3,300 – $8,200$5,750+5%
Augusta, GA231,930 jobs$3,200 – $8,000$5,600+3%
Columbus, GA116,380 jobs$3,050 – $7,450$5,250−4%
Gainesville, GA103,870 jobs$3,150 – $7,800$5,500level
Athens, GA95,800 jobs$3,150 – $7,700$5,400−1%
Macon, GA95,030 jobs$3,100 – $7,650$5,400−1%

Metros of a similar size

Big cities and small ones price differently, so here is Savannah against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Manchester, NH199,560 jobs$3,650 – $9,200$6,400+17%
Modesto, CA195,230 jobs$4,450 – $11,500$8,000+46%
Santa Maria, CA200,760 jobs$4,050 – $10,300$7,150+31%
Corpus Christi, TX192,580 jobs$3,250 – $8,150$5,700+4%

Concrete driveway: what moves the price in Savannah

  • Grading and drainage

    Professional grading runs $3-$8 per sq ft or $700-$2,500 for a typical job. A sloped lot or poor soil raises it.

  • Finish

    Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).

  • Permits and the apron

    A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.

Planning more than one job in Savannah?

Jobs that often go together with concrete driveway are priced below at their usual sizes, using the same Savannah wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (−10%) and concrete patio lowest (−12%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$2,800 – $6,650−10%
Gravel driveway1,000 sq ft$2,200 – $9,050−11%
Concrete slab400 sq ft$2,150 – $4,650−11%
Stamped concrete400 sq ft$2,900 – $7,000−11%
Paver patio300 sq ft$2,650 – $4,800−12%
Concrete patio300 sq ft$1,150 – $3,500−12%

Extras that change the Savannah total

Add-ons start from national price ranges and are scaled by 0.88 for Savannah, which is the average of the area's wage index (0.80) and goods price index (0.96). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add rebar reinforcement$530 – $1,600
Remove the old driveway$1,050 – $3,150

Who does the work: Savannah trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Savannah the blend is 0.80.

Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $22.04 an hour, 20% below the US median of $27.41. The middle half of them earn between $17.56 and $25.28 an hour. About 140 work in the metro. That is 7.1 per 10,000 jobs, compared with 13.3 nationally, so expect fewer local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $18.12 an hour, which is 20% below the national $22.66. The middle half of them earn between $14.71 and $21.63 an hour. BLS counts 1,210 of them working in the area, 61.0 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $23.47 an hour, 18% below the US median of $28.78. The middle half of them earn between $21.61 and $29.15 an hour. About 720 work in the metro. That is 36.3 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.

Carpenters (47-2031), 10% of the weighting: a median of $21.59 an hour, 26% below the US median of $29.12. The middle half of them earn between $18.51 and $26.34 an hour. About 330 work in the metro. That is 16.6 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $260 to the midpoint estimate; the 25th percentile takes off about $360. That is a swing of roughly 6.6% to 4.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Savannah has 198,360 jobs in total (BLS, May 2025), ranking 116th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$17.56$22.04$25.28$27.410.80metro
Construction laborers (47-2061)30%$14.71$18.12$21.63$22.660.80metro
Operating engineers and other construction equipment operators (47-2073)10%$21.61$23.47$29.15$28.780.82metro
Carpenters (47-2031)10%$18.51$21.59$26.34$29.120.74metro
Blended100%0.80

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,550 to $6,400 for Savannah, GA is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Savannah, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete driveway in Savannah: your questions

+How much does it cost to pour a concrete driveway in Savannah?

For 600 sq ft, expect $3,150 to $7,750 in the Savannah area. A standard-spec job lands at $4,550 to $6,400. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for concrete driveway in Savannah?

About $5.15 to $12.50 per sq ft for materials and labor, plus $50 to $190 for the permit if one is needed. The US range is $6 to $15.

+Is concrete driveway cheaper in Savannah or Hilton Head?

Hilton Head is 30 miles away. The midpoint for 600 sq ft there is $5,850, which is 8% more than Savannah ($5,450). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Savannah?

About 64% at the midpoint, or $3,500 out of $5,450. Materials are 33% and permits 2%. Nationally, labor is 69%.

+What would 2-car + apron (600 sq ft) cost in Savannah?

$3,150 to $7,750. Pick a different size in the estimator above to get your own number.

+Does concrete driveway need a permit in Savannah?

Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $190 for fees in the Savannah area (our national range of $50 to $200 scaled by the local price level).

+Is Savannah expensive for concrete driveway compared with the rest of Georgia?

Savannah is 2% below the Georgia statewide estimate ($5,600 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.

+What do cement masons and concrete finishers earn in Savannah?

The BLS median is $22.04 an hour in the Savannah area, compared with $27.41 nationally. The 25th to 75th percentile range is $17.56 to $25.28.

+What do basic and premium concrete driveway work cost in Savannah?

For 600 sq ft, basic work runs $3,150 to $5,000 and premium work $5,900 to $7,750. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.

+When is the best time to pour a concrete driveway in Savannah?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through May and September through December. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add rebar reinforcement" add in Savannah?

$530 to $1,600 for 600 sq ft, from a national range scaled by the local wage and goods indexes.

Concrete driveway near Savannah

Concrete driveway: all pricesConcrete driveway in GeorgiaAll projects in SavannahGeorgia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.