Skip to content
CostLocal

Concrete slab cost in Savannah, GA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (400 sq ft)
$2,150 – $4,650
Per sq ft
$5.30 – $10.50
before permit
Versus US midpoint
−11%
US $3,850
Rank of 300 metros
#259
1 = most expensive

If you want to pour a concrete slab in Savannah, plan on $2,150 to $4,650 for 400 sq ft, all in. Per sq ft, that is $5.30 to $10.50 for materials and labor, with the permit on top. The local midpoint runs 11% lower than the national one. Cement masons and concrete finishers earn a median of $22.04 an hour in the Savannah area, 20% below the US median of $27.41.

Estimate your concrete slab cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

4-5 inch slab with rebar or heavier mesh and standard base prep

Add-ons

Estimated cost for 400 sq ft in Savannah, GA, standard level

$2,900 to $3,900

About $6.90 to $9.10 per sq ft before permits. Labor is about 37% of the bill.

Cost breakdown
PartLowHigh
Materials$1,600$2,250
Labor$1,150$1,400
Permits and fees$150$280
Total$2,900$3,900
Save and get a PDF report

Cost breakdown for 400 sq ft in Savannah, GA

Part of the jobLowMidpointHighShare
Materials$1,150$1,950$2,70056%
Labor$960$1,300$1,60037%
Permits and fees$50$210$3806%
Total$2,150$3,400$4,650100%

Where the Savannah price comes from

Labor is 37% of the midpoint bill here, against 42% nationally. The mix of trades behind this job is cement masons and concrete finishers (50%), construction laborers (30%), operating engineers and other construction equipment operators (10%), carpenters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Savannah the blended ratio comes out at 0.80.

On the materials line, the BEA goods price index for the Savannah metro is 96.3 (US = 100). The midpoint materials bill for 400 sq ft comes to $1,950, compared with $2,000 at national prices. Permit and inspection fees are scaled by the broader index (95.2) and land at $50 to $380.

Savannah labor market for concrete slab

Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Savannah is 0.80 times the national level.

For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $22.04 an hour, which is 20% below the national $27.41. The middle half of them earn between $17.56 and $25.28 an hour. BLS counts 140 of them working in the area, 7.1 for every 10,000 jobs (US: 13.3), so the local bench is thinner than average.

Construction laborers (47-2061), 30% of the weighting: a median of $18.12 an hour, 20% below the US median of $22.66. The middle half of them earn between $14.71 and $21.63 an hour. About 1,210 work in the metro. That is 61.0 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $23.47 an hour, which is 18% below the national $28.78. The middle half of them earn between $21.61 and $29.15 an hour. BLS counts 720 of them working in the area, 36.3 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

For carpenters (47-2031, weighted 10%) the local median is $21.59 an hour, which is 26% below the national $29.12. The middle half of them earn between $18.51 and $26.34 an hour. BLS counts 330 of them working in the area, 16.6 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($25.28 an hour) instead of the median, the labor line grows by about $95. At the 25th percentile ($17.56) it shrinks by about $130. The total moves by 2.8% or 3.8%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 198,360 jobs in the Savannah area. That makes it the 116th largest of the 300 metros we cover, with 0.13% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$17.56$22.04$25.28$27.410.80metro
Construction laborers (47-2061)30%$14.71$18.12$21.63$22.660.80metro
Operating engineers and other construction equipment operators (47-2073)10%$21.61$23.47$29.15$28.780.82metro
Carpenters (47-2031)10%$18.51$21.59$26.34$29.120.74metro
Blended100%0.80

Concrete slab: what moves the price in Savannah

  • Thickness and mix

    A 4-inch slab uses about 1.23 cubic yards of concrete per 100 sq ft; a 6-inch slab uses about 1.85. Stepping up from a 3,000 PSI to a 4,000-4,500 PSI mix adds $10-$40 per cubic yard (Estimators.us).

  • Base and reinforcement

    A compacted gravel base, vapor barrier, and wire mesh or rebar are priced separately by some contractors and bundled by others. Ask which one your quote does.

  • Truck and pump access

    If the mixer truck can't back up to the forms, someone has to wheelbarrow it in or hire a pump. Pump or line-pump hire is typically billed per day.

Cost by quality level and size in Savannah

Three bands are cut from the same cited range and localized for Savannah wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 5 common sizes.

Basic

$2,150 to $3,150

4-inch broom-finish slab, light mesh, easy truck access

Standard

$2,900 to $3,900

4-5 inch slab with rebar or heavier mesh and standard base prep

Premium

$3,650 to $4,650

6-inch slab, heavy reinforcement, thick base, pump truck or tight access

Cost by size and quality level
SizeBasicStandardPremium
10x10 pad (100 sq ft)$580 – $930$840 – $1,200$1,100 – $1,450
12x12 (144 sq ft)$810 – $1,250$1,150 – $1,600$1,500 – $1,950
20x20 (400 sq ft)$2,150 – $3,150$2,900 – $3,900$3,650 – $4,650
24x24 garage floor (576 sq ft)$3,100 – $4,500$4,150 – $5,500$5,150 – $6,550
30x40 foundation (1,200 sq ft)$6,400 – $9,150$8,450 – $11,200$10,500 – $13,300

Climate in Savannah: timing your concrete slab job

We use NOAA's 1991-2020 climate normals for Savannah Intl Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.

February through May and September through December are the stretches where pouring concrete runs into the fewest weather problems in Savannah (8 of 12 months). January has an average overnight low of 40°F or below; June, July and August have an average daytime high of 90°F or more.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Heat matters for concrete as well. With average highs of 90°F or more in June, July and August, crews often start early, wet the base and plan for faster set times.

Savannah gets about 48 inches of precipitation in a normal year. The wettest months are June, July and August (6.7 inches in June). Inside the workable window, February and November are the driest, at 2.8 and 2.4 inches. The station averages about 81 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Savannah Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan61403.3Cold
Feb65432.8Workable
Mar71493.5Workable
Apr78553.4Workable
May85633.6Workable
Jun90716.7Hot
Jul92745.8Hot
Aug91735.5Hot
Sep86694.3Workable
Oct79593.7Workable
Nov70482.4Workable
Dec64433.2Workable

Savannah against nearby metros and the rest of Georgia

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $3,400 to $3,600 across Savannah and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Savannah, GAthis page$2,150 – $4,650$3,400
Hilton Head, SC30 miles$2,250 – $4,850$3,550+5%
Charleston, SC95 miles$2,300 – $4,900$3,600+6%
Augusta, GA100 miles$2,200 – $4,750$3,450+1%
Jacksonville, FL135 miles$2,250 – $4,850$3,550+4%
Columbia, SC135 miles$2,250 – $4,800$3,550+4%
Georgia (statewide)$2,200 – $4,800$3,500+2%
United States$2,450 – $5,200$3,850+12%

Across 300 US metros, Savannah comes in at #259 from the top. The priciest is Kahului, HI at $5,300; the cheapest is McAllen, TX at $3,200 (midpoints, 400 sq ft). Statewide, Savannah is 2% below the Georgia figure.

Other Georgia metros

Georgia metros compared with Savannah
MetroSizeRangeMidpointvs. here
Atlanta, GA2,889,670 jobs$2,250 – $4,900$3,600+5%
Augusta, GA231,930 jobs$2,200 – $4,750$3,450+1%
Columbus, GA116,380 jobs$2,100 – $4,550$3,350−3%
Gainesville, GA103,870 jobs$2,150 – $4,700$3,450level
Athens, GA95,800 jobs$2,150 – $4,650$3,400level
Macon, GA95,030 jobs$2,150 – $4,600$3,400−1%

Cities with a workforce like Savannah's

Big cities and small ones price differently, so here is Savannah against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Manchester, NH199,560 jobs$2,450 – $5,150$3,800+11%
Modesto, CA195,230 jobs$2,900 – $6,000$4,450+31%
Santa Maria, CA200,760 jobs$2,700 – $5,650$4,150+22%
Corpus Christi, TX192,580 jobs$2,200 – $4,700$3,450+1%

Planning more than one job in Savannah?

Because every project leans on different trades, Savannah's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs −10% and concrete driveway −15%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,150 – $7,750−15%
Concrete patio300 sq ft$1,150 – $3,500−12%
Detached garage576 sq ft$25,400 – $51,100−12%
Stamped concrete400 sq ft$2,900 – $7,000−11%
Asphalt driveway600 sq ft$2,800 – $6,650−10%
Gravel driveway1,000 sq ft$2,200 – $9,050−11%

Add-ons priced for Savannah

Extras are quoted nationally and then scaled to Savannah by the average of the local wage index (0.80) and goods index (0.96), a factor of 0.88. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add rebar reinforcement$350 – $1,050
Remove old concrete first$700 – $2,100

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,900 to $3,900 for Savannah, GA is attached.

A detailed PDF report of this estimate, $9

The report lays out the concrete slab numbers for Savannah, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete slab in Savannah: your questions

+How much does it cost to pour a concrete slab in Savannah?

For 400 sq ft, expect $2,150 to $4,650 in the Savannah area. A standard-spec job lands at $2,900 to $3,900. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for concrete slab in Savannah?

About $5.30 to $10.50 per sq ft for materials and labor, plus $50 to $380 for the permit if one is needed. The US range is $6 to $12.

+Is concrete slab cheaper in Savannah or Hilton Head?

Hilton Head is 30 miles away. The midpoint for 400 sq ft there is $3,550, which is 5% more than Savannah ($3,400). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Savannah?

About 37% at the midpoint, or $1,300 out of $3,400. Materials are 56% and permits 6%. Nationally, labor is 42%.

+What would 20x20 (400 sq ft) cost in Savannah?

$2,150 to $4,650. Pick a different size in the estimator above to get your own number.

+Does concrete slab need a permit in Savannah?

Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $380 for fees in the Savannah area (our national range of $50 to $400 scaled by the local price level).

+Is Savannah expensive for concrete slab compared with the rest of Georgia?

Savannah is 2% below the Georgia statewide estimate ($3,500 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.

+What do cement masons and concrete finishers earn in Savannah?

The BLS median is $22.04 an hour in the Savannah area, compared with $27.41 nationally. The 25th to 75th percentile range is $17.56 to $25.28.

+What do basic and premium concrete slab work cost in Savannah?

For 400 sq ft, basic work runs $2,150 to $3,150 and premium work $3,650 to $4,650. Basic means: 4-inch broom-finish slab, light mesh, easy truck access. Premium means: 6-inch slab, heavy reinforcement, thick base, pump truck or tight access.

+When is the best time to pour a concrete slab in Savannah?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through May and September through December. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add rebar reinforcement" add in Savannah?

$350 to $1,050 for 400 sq ft, from a national range scaled by the local wage and goods indexes.

Concrete slab near Savannah

Concrete slab: all pricesConcrete slab in GeorgiaAll projects in SavannahGeorgia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.