Gravel driveway cost in Albany, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1,000 sq ft)
- $2,150 – $8,800
- Per sq ft
- $2.15 – $8.60
- before permit
- Versus US midpoint
- −14%
- US $6,350
- Rank of 300 metros
- #287
- 1 = most expensive
If you want to install a gravel driveway in Albany, plan on $2,150 to $8,800 for 1,000 sq ft, all in. Per sq ft, that is $2.15 to $8.60 for materials and labor, with the permit on top. The local midpoint runs 14% lower than the national one. Construction laborers earn a median of $17.25 an hour in the Albany area, 24% below the US median of $22.66.
Estimate your gravel driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1,000 sq ft in Albany, GA, standard level
$4,150 to $6,800
About $4.10 to $6.65 per sq ft before permits. Labor is about 44% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,250 | $3,700 |
| Labor | $1,850 | $2,950 |
| Permits and fees | $55 | $120 |
| Total | $4,150 | $6,800 |
Cost breakdown for 1,000 sq ft in Albany, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,150 | $3,000 | $4,800 | 55% |
| Labor | $990 | $2,400 | $3,800 | 44% |
| Permits and fees | $0 | $90 | $180 | 2% |
| Total | $2,150 | $5,450 | $8,800 | 100% |
What is behind the Albany number
We price the labor side from BLS wage data for 2 trades: construction laborers at 50%, operating engineers and other construction equipment operators at 50%. Weighted together, Albany wages are 0.76 times the national level. Labor makes up about 44% of the midpoint estimate (50% at national prices).
On the materials line, the BEA goods price index for the Albany metro is 96.3 (US = 100). The midpoint materials bill for 1,000 sq ft comes to $3,000, compared with $3,100 at national prices. Permit and inspection fees are scaled by the broader index (87.7) and land at $0 to $180.
Climate in Albany: timing your gravel driveway job
We use NOAA's 1991-2020 climate normals for Albany Sw Ga Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Albany (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Albany gets about 47 inches of precipitation in a normal year. The wettest months are June, July and August (5.1 inches in July). Inside the workable window, May and October are the driest, at 2.4 and 2.3 inches. The station averages about 106 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 62 | 39 | 4.2 | Workable |
| Feb | 66 | 42 | 4.0 | Workable |
| Mar | 73 | 48 | 4.4 | Workable |
| Apr | 80 | 54 | 3.7 | Workable |
| May | 88 | 63 | 2.4 | Workable |
| Jun | 91 | 71 | 5.1 | Hot |
| Jul | 93 | 73 | 5.1 | Hot |
| Aug | 92 | 73 | 4.8 | Hot |
| Sep | 88 | 68 | 3.4 | Workable |
| Oct | 81 | 57 | 2.3 | Workable |
| Nov | 71 | 46 | 2.9 | Workable |
| Dec | 64 | 41 | 4.3 | Workable |
Add-ons priced for Albany
Extras are quoted nationally and then scaled to Albany by the average of the local wage index (0.76) and goods index (0.96), a factor of 0.86. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add edging (approx. 1 ft per 10 sq ft) | $430 – $1,550 |
Pick a size, pick a tier: gravel driveway pricing in Albany
Three bands are cut from the same cited range and localized for Albany wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,150 to $4,800
Crusher-run spread and compacted on firm ground
Standard
$4,150 to $6,800
Excavated base plus top course, fabric, light grading
Premium
$6,150 to $8,800
Deep multi-layer build, edging, culvert or drainage
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single car (500 sq ft) | $1,050 – $2,450 | $2,100 – $3,450 | $3,100 – $4,500 |
| two car (1,000 sq ft) | $2,150 – $4,800 | $4,150 – $6,800 | $6,150 – $8,800 |
| 100 ft x 10 ft (1,000 sq ft) | $2,150 – $4,800 | $4,150 – $6,800 | $6,150 – $8,800 |
| long rural (2,000 sq ft) | $4,300 – $9,550 | $8,200 – $13,500 | $12,200 – $17,400 |
Is Albany cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1,000 sq ft range from $5,400 to $5,650 across Albany and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Albany, GAthis page | $2,150 – $8,800 | $5,450 | |
| Warner Robins, GA65 miles | $2,200 – $9,100 | $5,650 | +4% |
| Columbus, GA70 miles | $2,150 – $8,850 | $5,500 | +1% |
| Dothan, AL85 miles | $2,100 – $8,650 | $5,400 | −2% |
| Macon, GA85 miles | $2,200 – $9,050 | $5,650 | +3% |
| Tallahassee, FL90 miles | $2,200 – $9,000 | $5,600 | +2% |
| Georgia (statewide) | $2,250 – $9,200 | $5,750 | +5% |
| United States | $2,500 – $10,200 | $6,350 | +16% |
Across 300 US metros, Albany comes in at #287 from the top. The priciest is Kahului, HI at $9,500; the cheapest is McAllen, TX at $5,200 (midpoints, 1,000 sq ft). Statewide, Albany is 5% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $2,300 – $9,500 | $5,900 | +8% |
| Augusta, GA | 231,930 jobs | $2,200 – $9,050 | $5,650 | +3% |
| Savannah, GA | 198,360 jobs | $2,200 – $9,050 | $5,600 | +3% |
| Columbus, GA | 116,380 jobs | $2,150 – $8,850 | $5,500 | +1% |
| Gainesville, GA | 103,870 jobs | $2,200 – $9,050 | $5,650 | +3% |
| Athens, GA | 95,800 jobs | $2,150 – $8,800 | $5,500 | level |
Cities with a workforce like Albany's
Big cities and small ones price differently, so here is Albany against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dubuque, IA | 58,470 jobs | $2,450 – $10,000 | $6,250 | +15% |
| Wheeling, WV | 58,130 jobs | $2,400 – $9,850 | $6,150 | +12% |
| Altoona, PA | 58,650 jobs | $2,400 – $9,750 | $6,100 | +11% |
| Sebastian, FL | 57,620 jobs | $2,300 – $9,500 | $5,900 | +8% |
What nearby projects cost in Albany
Because every project leans on different trades, Albany's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs −10% and concrete driveway −22%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Asphalt driveway | 600 sq ft | $2,750 – $6,600 | −10% |
| Concrete driveway | 600 sq ft | $2,900 – $7,100 | −22% |
| French drain | 60 linear ft | $510 – $1,800 | −14% |
| Sod installation | 1,500 sq ft | $1,300 – $2,850 | −13% |
| Concrete slab | 400 sq ft | $2,050 – $4,450 | −15% |
| Paver patio | 300 sq ft | $2,550 – $4,600 | −15% |
Gravel driveway: what moves the price in Albany
Depth and layers
A proper driveway is a 4-inch base plus a 2-inch top course. Each extra inch of stone adds weight in tons and money.
Labor share
HomeGuide puts labor at about 50% of a gravel driveway's total cost, so a longer or harder-to-reach site moves the price more than the stone does.
Grading and edging
Grading runs $1-$3 per sq ft. Edging to keep the stone in is $5-$18 per linear foot.
Albany labor market for gravel driveway
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Albany is 0.76 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $17.25 an hour, 24% below the US median of $22.66. The middle half of them earn between $14.62 and $18.96 an hour. About 400 work in the metro. That is 68.5 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 50%) the local median is $21.86 an hour, which is 24% below the national $28.78. The middle half of them earn between $18.48 and $22.50 an hour. BLS counts 260 of them working in the area, 44.5 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($18.96 an hour) instead of the median, the labor line grows by about $120. At the 25th percentile ($14.62) it shrinks by about $180. The total moves by 2.2% or 3.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 58,390 jobs in the Albany area. That makes it the 293rd largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $14.62 | $17.25 | $18.96 | $22.66 | 0.76 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 50% | $18.48 | $21.86 | $22.50 | $28.78 | 0.76 | metro |
| Blended | 100% | 0.76 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,150 to $6,800 for Albany, GA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Albany, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gravel driveway in Albany: your questions
+How much does it cost to install a gravel driveway in Albany?
For 1,000 sq ft, expect $2,150 to $8,800 in the Albany area. A standard-spec job lands at $4,150 to $6,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for gravel driveway in Albany?
About $2.15 to $8.60 per sq ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $2.50 to $10.
+Is gravel driveway cheaper in Albany or Warner Robins?
Warner Robins is 65 miles away. The midpoint for 1,000 sq ft there is $5,650, which is 4% more than Albany ($5,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Albany?
About 44% at the midpoint, or $2,400 out of $5,450. Materials are 55% and permits 2%. Nationally, labor is 50%.
+What would 100 ft x 10 ft (1,000 sq ft) cost in Albany?
$2,150 to $8,800. Pick a different size in the estimator above to get your own number.
+Does gravel driveway need a permit in Albany?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Albany area (our national range of $0 to $200 scaled by the local price level).
+Is Albany expensive for gravel driveway compared with the rest of Georgia?
Albany is 5% below the Georgia statewide estimate ($5,750 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do construction laborers earn in Albany?
The BLS median is $17.25 an hour in the Albany area, compared with $22.66 nationally. The 25th to 75th percentile range is $14.62 to $18.96.
+What do basic and premium gravel driveway work cost in Albany?
For 1,000 sq ft, basic work runs $2,150 to $4,800 and premium work $6,150 to $8,800. Basic means: crusher-run spread and compacted on firm ground. Premium means: deep multi-layer build, edging, culvert or drainage.
+When is the best time to install a gravel driveway in Albany?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add edging" add in Albany?
$430 to $1,550 for 1,000 sq ft, from a national range scaled by the local wage and goods indexes.
Gravel driveway near Albany
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Gravel Driveway Cost? (2026) (accessed November 4, 2026)
- CalculateGravel: Gravel Driveway Cost in 2026 (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Installed range spans a basic spread-and-compact job ($2.50/sq ft low, CalculateGravel) to a full build with excavation ($10/sq ft high, HomeGuide). Materials low end is DIY stone ($1.20/sq ft, CalculateGravel); high end is half of HomeGuide's $10 because it says labor is about 50% of the project.