Asphalt driveway cost in Albany, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,750 – $6,600
- Per sq ft
- $4.55 – $10.50
- before permit
- Versus US midpoint
- −10%
- US $5,250
- Rank of 300 metros
- #274
- 1 = most expensive
Albany homeowners pay roughly $2,750 to $6,600 to pave a driveway at 600 sq ft, or $4.55 to $10.50 per sq ft (permit not included). Against the US midpoint, Albany is 10% lower. Paving, surfacing and tamping equipment operators earn a median of $22.16 an hour in the Albany area, 14% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Albany, GA, standard level
$3,900 to $5,450
About $6.40 to $8.85 per sq ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,350 | $2,050 |
| Permits and fees | $85 | $140 |
| Total | $3,900 | $5,450 |
Cost breakdown for 600 sq ft in Albany, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,800 | 61% |
| Labor | $820 | $1,700 | $2,600 | 37% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $2,750 | $4,700 | $6,600 | 100% |
What is behind the Albany number
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $22.16 an hour. Add the other trades involved and the blended wage index for Albany is 0.80 (US = 1.00), which puts labor at 37% of the total. BLS does not publish this trade for the metro, so we used the Georgia statewide median.
On the materials line, the BEA goods price index for the Albany metro is 96.3 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (87.7) and land at $45 to $180.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Albany. The wage table below marks each row.
Extras that change the Albany total
Extras are quoted nationally and then scaled to Albany by the average of the local wage index (0.80) and goods index (0.96), a factor of 0.88. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $530 – $1,050 |
Cost by quality level and size in Albany
Three bands are cut from the same cited range and localized for Albany wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,750 to $4,300
New topcoat over a sound base, flat lot
Standard
$3,900 to $5,450
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,050 to $6,600
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,800 | $1,600 – $2,250 | $2,100 – $2,750 |
| 20x20 (400 sq ft) | $1,850 – $2,900 | $2,650 – $3,650 | $3,400 – $4,450 |
| 2-car (20x30), 600 sq ft | $2,750 – $4,300 | $3,900 – $5,450 | $5,050 – $6,600 |
| long rural (10x100), 1,000 sq ft | $4,600 – $7,100 | $6,450 – $9,000 | $8,350 – $10,900 |
Related projects, priced for Albany
Because every project leans on different trades, Albany's wage level does not move all prices equally. Against the US midpoint, gravel driveway runs −14% and concrete driveway −22%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $2,900 – $7,100 | −22% |
| Gravel driveway | 1,000 sq ft | $2,150 – $8,800 | −14% |
| Paver patio | 300 sq ft | $2,550 – $4,600 | −15% |
| French drain | 60 linear ft | $510 – $1,800 | −14% |
| Concrete slab | 400 sq ft | $2,050 – $4,450 | −15% |
| Concrete patio | 300 sq ft | $1,100 – $3,200 | −18% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Albany is 0.80 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Albany metro, so we used the Georgia statewide median: $22.16 an hour against $25.64 for the US. The middle half of them earn between $18.92 and $23.66 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $17.25 an hour, 24% below the US median of $22.66. The middle half of them earn between $14.62 and $18.96 an hour. About 400 work in the metro. That is 68.5 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $21.86 an hour, which is 24% below the national $28.78. The middle half of them earn between $18.48 and $22.50 an hour. BLS counts 260 of them working in the area, 44.5 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($23.66 an hour) instead of the median, the labor line grows by about $50. At the 25th percentile ($18.92) it shrinks by about $110. The total moves by 1.1% or 2.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 58,390 jobs in the Albany area. That makes it the 293rd largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $18.92 | $22.16 | $23.66 | $25.64 | 0.86 | state |
| Construction laborers (47-2061) | 30% | $14.62 | $17.25 | $18.96 | $22.66 | 0.76 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $18.48 | $21.86 | $22.50 | $28.78 | 0.76 | metro |
| Blended | 100% | 0.80 | |||||
Asphalt driveway: what moves the price in Albany
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
When to schedule asphalt driveway in Albany
We use NOAA's 1991-2020 climate normals for Albany Sw Ga Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Albany (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Albany gets about 47 inches of precipitation in a normal year. The wettest months are June, July and August (5.1 inches in July). Inside the workable window, May and October are the driest, at 2.4 and 2.3 inches. The station averages about 106 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 62 | 39 | 4.2 | Workable |
| Feb | 66 | 42 | 4.0 | Workable |
| Mar | 73 | 48 | 4.4 | Workable |
| Apr | 80 | 54 | 3.7 | Workable |
| May | 88 | 63 | 2.4 | Workable |
| Jun | 91 | 71 | 5.1 | Hot |
| Jul | 93 | 73 | 5.1 | Hot |
| Aug | 92 | 73 | 4.8 | Hot |
| Sep | 88 | 68 | 3.4 | Workable |
| Oct | 81 | 57 | 2.3 | Workable |
| Nov | 71 | 46 | 2.9 | Workable |
| Dec | 64 | 41 | 4.3 | Workable |
Albany against nearby metros and the rest of Georgia
Of the five closest metros, 2 are cheaper than Albany. Dothan is the lowest at about $4,550 (midpoint, 600 sq ft), 85 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Albany, GAthis page | $2,750 – $6,600 | $4,700 | |
| Warner Robins, GA65 miles | $2,800 – $6,700 | $4,750 | +2% |
| Columbus, GA70 miles | $2,800 – $6,600 | $4,700 | level |
| Dothan, AL85 miles | $2,700 – $6,450 | $4,550 | −2% |
| Macon, GA85 miles | $2,800 – $6,700 | $4,750 | +1% |
| Tallahassee, FL90 miles | $2,750 – $6,450 | $4,600 | −2% |
| Georgia (statewide) | $2,850 – $6,800 | $4,850 | +3% |
| United States | $3,050 – $7,400 | $5,250 | +12% |
Across 300 US metros, Albany comes in at #274 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Albany is 3% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $2,900 – $6,950 | $4,950 | +6% |
| Augusta, GA | 231,930 jobs | $2,800 – $6,700 | $4,750 | +2% |
| Savannah, GA | 198,360 jobs | $2,800 – $6,650 | $4,700 | +1% |
| Columbus, GA | 116,380 jobs | $2,800 – $6,600 | $4,700 | level |
| Gainesville, GA | 103,870 jobs | $2,800 – $6,700 | $4,750 | +2% |
| Athens, GA | 95,800 jobs | $2,750 – $6,600 | $4,700 | level |
Cities with a workforce like Albany's
Big cities and small ones price differently, so here is Albany against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dubuque, IA | 58,470 jobs | $3,000 – $7,400 | $5,200 | +11% |
| Wheeling, WV | 58,130 jobs | $2,950 – $7,150 | $5,050 | +8% |
| Altoona, PA | 58,650 jobs | $3,000 – $7,300 | $5,150 | +10% |
| Sebastian, FL | 57,620 jobs | $2,850 – $6,900 | $4,850 | +4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,900 to $5,450 for Albany, GA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Albany, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Albany: your questions
+How much does it cost to pave a driveway in Albany?
For 600 sq ft, expect $2,750 to $6,600 in the Albany area. A standard-spec job lands at $3,900 to $5,450. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Albany?
About $4.55 to $10.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Albany or Warner Robins?
Warner Robins is 65 miles away. The midpoint for 600 sq ft there is $4,750, which is 2% more than Albany ($4,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Albany?
About 37% at the midpoint, or $1,700 out of $4,700. Materials are 61% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Albany?
$2,750 to $6,600. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Albany?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Albany area (our national range of $50 to $200 scaled by the local price level).
+Is Albany expensive for asphalt driveway compared with the rest of Georgia?
Albany is 3% below the Georgia statewide estimate ($4,850 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Albany?
BLS has no published metro figure here, so we use the statewide median of $22.16 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $18.92 to $23.66.
+What do basic and premium asphalt driveway work cost in Albany?
For 600 sq ft, basic work runs $2,750 to $4,300 and premium work $5,050 to $6,600. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Albany?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Albany?
$530 to $1,050 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Albany
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.