Asphalt driveway cost in Macon, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,800 – $6,700
- Per sq ft
- $4.60 – $11
- before permit
- Versus US midpoint
- −9%
- US $5,250
- Rank of 300 metros
- #253
- 1 = most expensive
An asphalt driveway in Macon, GA usually costs $2,800 to $6,700 for 600 sq ft. That works out to about $4.60 to $11 per sq ft before permits. Compared with the national midpoint that is $480 less. Paving, surfacing and tamping equipment operators earn a median of $22.16 an hour in the Macon area, 14% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Macon, GA, standard level
$3,950 to $5,500
About $6.45 to $8.95 per sq ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $85 | $140 |
| Total | $3,950 | $5,500 |
Cost breakdown for 600 sq ft in Macon, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,800 | 60% |
| Labor | $850 | $1,750 | $2,700 | 37% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $2,800 | $4,750 | $6,700 | 100% |
What is behind the Macon number
Labor is 37% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Macon the blended ratio comes out at 0.83. BLS does not publish this trade for the metro, so we used the Georgia statewide median.
Materials are scaled with BEA's regional price parity for goods. Macon is at 96.3 against 100 for the US, so a materials line of $2,950 nationally becomes $2,850 here (midpoint, 600 sq ft). Permits follow the all-items index of 88.5: $45 to $180.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Macon. The wage table below marks each row.
Why two Macon quotes can differ
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
What nearby projects cost in Macon
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Macon wage and price inputs. Compared with national midpoints, French drain comes out highest (−10%) and concrete driveway lowest (−16%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,100 – $7,650 | −16% |
| Gravel driveway | 1,000 sq ft | $2,200 – $9,050 | −11% |
| Paver patio | 300 sq ft | $2,700 – $4,850 | −11% |
| French drain | 60 linear ft | $540 – $1,900 | −10% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
Optional extras in Macon
Add-ons start from national price ranges and are scaled by 0.90 for Macon, which is the average of the area's wage index (0.83) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $540 – $1,100 |
Macon weather and the asphalt driveway calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Macon Middle Ga Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Macon are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Macon gets about 47 inches of precipitation in a normal year. The wettest months are June, July and December (4.8 inches in July). Inside the workable window, May and October are the driest, at 2.6 and 2.6 inches. The station averages about 85 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 36 | 4.3 | Workable |
| Feb | 63 | 39 | 4.2 | Workable |
| Mar | 71 | 45 | 4.3 | Workable |
| Apr | 78 | 51 | 3.6 | Workable |
| May | 86 | 60 | 2.6 | Workable |
| Jun | 91 | 68 | 4.4 | Hot |
| Jul | 94 | 72 | 4.8 | Hot |
| Aug | 92 | 71 | 4.4 | Hot |
| Sep | 88 | 65 | 3.7 | Workable |
| Oct | 79 | 53 | 2.6 | Workable |
| Nov | 69 | 43 | 3.4 | Workable |
| Dec | 61 | 38 | 4.6 | Workable |
What local crews earn in Macon
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Macon the blend is 0.83.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Macon metro, so we used the Georgia statewide median: $22.16 an hour against $25.64 for the US. The middle half of them earn between $18.92 and $23.66 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $19.23 an hour, which is 15% below the national $22.66. The middle half of them earn between $17.05 and $20.66 an hour. BLS counts 420 of them working in the area, 44.2 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $22.26 an hour, 23% below the US median of $28.78. The middle half of them earn between $20.93 and $24.51 an hour. About 310 work in the metro. That is 32.6 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $50 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 2.3% to 1.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Macon-Bibb County has 95,030 jobs in total (BLS, May 2025), ranking 211th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $18.92 | $22.16 | $23.66 | $25.64 | 0.86 | state |
| Construction laborers (47-2061) | 30% | $17.05 | $19.23 | $20.66 | $22.66 | 0.85 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $20.93 | $22.26 | $24.51 | $28.78 | 0.77 | metro |
| Blended | 100% | 0.83 | |||||
Is Macon cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $4,700 to $4,950 across Macon and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Macon, GAthis page | $2,800 – $6,700 | $4,750 | |
| Warner Robins, GA25 miles | $2,800 – $6,700 | $4,750 | level |
| Atlanta, GA70 miles | $2,900 – $6,950 | $4,950 | +4% |
| Columbus, GA70 miles | $2,800 – $6,600 | $4,700 | −1% |
| Athens, GA80 miles | $2,750 – $6,600 | $4,700 | −1% |
| Albany, GA85 miles | $2,750 – $6,600 | $4,700 | −1% |
| Georgia (statewide) | $2,850 – $6,800 | $4,850 | +2% |
| United States | $3,050 – $7,400 | $5,250 | +10% |
Out of the 300 metros we cover, Macon ranks #253 for the cost of this job (#1 is the most expensive). Statewide, Macon is 2% below the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $2,900 – $6,950 | $4,950 | +4% |
| Augusta, GA | 231,930 jobs | $2,800 – $6,700 | $4,750 | level |
| Savannah, GA | 198,360 jobs | $2,800 – $6,650 | $4,700 | −1% |
| Columbus, GA | 116,380 jobs | $2,800 – $6,600 | $4,700 | −1% |
| Gainesville, GA | 103,870 jobs | $2,800 – $6,700 | $4,750 | level |
| Athens, GA | 95,800 jobs | $2,750 – $6,600 | $4,700 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Macon against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fort Smith, AR | 95,560 jobs | $2,650 – $6,200 | $4,450 | −7% |
| Barnstable, MA | 94,110 jobs | $3,200 – $7,950 | $5,550 | +17% |
| Athens, GA | 95,800 jobs | $2,750 – $6,600 | $4,700 | −1% |
| Billings, MT | 93,800 jobs | $2,950 – $7,200 | $5,100 | +7% |
Pick a size, pick a tier: asphalt driveway pricing in Macon
The cited range is split into basic, standard and premium bands, then scaled to Macon. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$2,800 to $4,350
New topcoat over a sound base, flat lot
Standard
$3,950 to $5,500
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,150 to $6,700
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,800 | $1,650 – $2,300 | $2,150 – $2,800 |
| 20x20 (400 sq ft) | $1,900 – $2,950 | $2,650 – $3,750 | $3,450 – $4,500 |
| 2-car (20x30), 600 sq ft | $2,800 – $4,350 | $3,950 – $5,500 | $5,150 – $6,700 |
| long rural (10x100), 1,000 sq ft | $4,650 – $7,200 | $6,550 – $9,100 | $8,450 – $11,000 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,950 to $5,500 for Macon, GA is attached.
Detailed asphalt driveway report for Macon, GA, $9
Multi-page report for Macon, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Macon: your questions
+How much does it cost to pave a driveway in Macon?
For 600 sq ft, expect $2,800 to $6,700 in the Macon area. A standard-spec job lands at $3,950 to $5,500. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Macon?
About $4.60 to $11 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Macon or Warner Robins?
Warner Robins is 25 miles away. The midpoint for 600 sq ft there is $4,750, which is 0% more than Macon ($4,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Macon?
About 37% at the midpoint, or $1,750 out of $4,750. Materials are 60% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Macon?
$2,800 to $6,700. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Macon?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Macon area (our national range of $50 to $200 scaled by the local price level).
+Is Macon expensive for asphalt driveway compared with the rest of Georgia?
Macon is 2% below the Georgia statewide estimate ($4,850 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Macon?
BLS has no published metro figure here, so we use the statewide median of $22.16 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $18.92 to $23.66.
+What do basic and premium asphalt driveway work cost in Macon?
For 600 sq ft, basic work runs $2,800 to $4,350 and premium work $5,150 to $6,700. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Macon?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Macon?
$540 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Macon
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.