Asphalt driveway cost in Warner Robins, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,800 – $6,700
- Per sq ft
- $4.60 – $11
- before permit
- Versus US midpoint
- −9%
- US $5,250
- Rank of 300 metros
- #245
- 1 = most expensive
Warner Robins homeowners pay roughly $2,800 to $6,700 to pave a driveway at 600 sq ft, or $4.60 to $11 per sq ft (permit not included). Against the US midpoint, Warner Robins is 9% lower. Paving, surfacing and tamping equipment operators earn a median of $22.16 an hour in the Warner Robins area, 14% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Warner Robins, GA, standard level
$4,000 to $5,550
About $6.50 to $9 per sq ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $90 | $150 |
| Total | $4,000 | $5,550 |
Cost breakdown for 600 sq ft in Warner Robins, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,800 | 60% |
| Labor | $850 | $1,800 | $2,700 | 37% |
| Permits and fees | $45 | $120 | $190 | 2% |
| Total | $2,800 | $4,750 | $6,700 | 100% |
Where the Warner Robins price comes from
Labor is 37% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Warner Robins the blended ratio comes out at 0.84. BLS does not publish this trade for the metro, so we used the Georgia statewide median.
On the materials line, the BEA goods price index for the Warner Robins metro is 96.3 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (93.8) and land at $45 to $190.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Warner Robins. The wage table below marks each row.
Related projects, priced for Warner Robins
Because every project leans on different trades, Warner Robins's wage level does not move all prices equally. Against the US midpoint, concrete slab runs −10% and concrete driveway −14%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,200 – $7,850 | −14% |
| Gravel driveway | 1,000 sq ft | $2,200 – $9,100 | −11% |
| Paver patio | 300 sq ft | $2,700 – $4,850 | −11% |
| French drain | 60 linear ft | $540 – $1,900 | −10% |
| Concrete slab | 400 sq ft | $2,200 – $4,700 | −10% |
| Concrete patio | 300 sq ft | $1,150 – $3,500 | −12% |
When to schedule asphalt driveway in Warner Robins
We use NOAA's 1991-2020 climate normals for Warner Robins (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through June is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Warner Robins (10 of 12 months). July and August have an average daytime high of 90°F or more.
Warner Robins gets about 52 inches of precipitation in a normal year. The wettest months are June, July and August (5.3 inches in June). Inside the workable window, May and October are the driest, at 2.8 and 3.4 inches. The station averages about 76 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 36 | 4.8 | Workable |
| Feb | 62 | 40 | 4.8 | Workable |
| Mar | 69 | 46 | 4.9 | Workable |
| Apr | 76 | 52 | 3.5 | Workable |
| May | 83 | 61 | 2.8 | Workable |
| Jun | 89 | 69 | 5.3 | Workable |
| Jul | 91 | 72 | 5.0 | Hot |
| Aug | 90 | 72 | 5.0 | Hot |
| Sep | 85 | 66 | 4.0 | Workable |
| Oct | 77 | 56 | 3.4 | Workable |
| Nov | 67 | 44 | 3.6 | Workable |
| Dec | 60 | 38 | 4.7 | Workable |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Warner Robins is 0.84 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Warner Robins metro, so we used the Georgia statewide median: $22.16 an hour against $25.64 for the US. The middle half of them earn between $18.92 and $23.66 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $18.99 an hour, 16% below the US median of $22.66. The middle half of them earn between $16.97 and $21.46 an hour. About 290 work in the metro. That is 38.1 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.13 an hour, which is 20% below the national $28.78. The middle half of them earn between $19.38 and $27.66 an hour. BLS counts 240 of them working in the area, 31.6 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($23.66 an hour) instead of the median, the labor line grows by about $50. At the 25th percentile ($18.92) it shrinks by about $110. The total moves by 1.0% or 2.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 76,050 jobs in the Warner Robins area. That makes it the 244th largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $18.92 | $22.16 | $23.66 | $25.64 | 0.86 | state |
| Construction laborers (47-2061) | 30% | $16.97 | $18.99 | $21.46 | $22.66 | 0.84 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $19.38 | $23.13 | $27.66 | $28.78 | 0.80 | metro |
| Blended | 100% | 0.84 | |||||
Why two Warner Robins quotes can differ
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Pick a size, pick a tier: asphalt driveway pricing in Warner Robins
Three bands are cut from the same cited range and localized for Warner Robins wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,800 to $4,350
New topcoat over a sound base, flat lot
Standard
$4,000 to $5,550
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,150 to $6,700
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,800 | $1,650 – $2,300 | $2,150 – $2,800 |
| 20x20 (400 sq ft) | $1,900 – $2,950 | $2,700 – $3,750 | $3,500 – $4,550 |
| 2-car (20x30), 600 sq ft | $2,800 – $4,350 | $4,000 – $5,550 | $5,150 – $6,700 |
| long rural (10x100), 1,000 sq ft | $4,650 – $7,200 | $6,550 – $9,150 | $8,500 – $11,100 |
Warner Robins against nearby metros and the rest of Georgia
Same job, same size (600 sq ft), priced for the nearest metros. Atlanta is the priciest of the group at $4,950. Albany is the cheapest at $4,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Warner Robins, GAthis page | $2,800 – $6,700 | $4,750 | |
| Macon, GA25 miles | $2,800 – $6,700 | $4,750 | level |
| Albany, GA65 miles | $2,750 – $6,600 | $4,700 | −2% |
| Columbus, GA65 miles | $2,800 – $6,600 | $4,700 | −1% |
| Atlanta, GA95 miles | $2,900 – $6,950 | $4,950 | +4% |
| Athens, GA105 miles | $2,750 – $6,600 | $4,700 | −2% |
| Georgia (statewide) | $2,850 – $6,800 | $4,850 | +2% |
| United States | $3,050 – $7,400 | $5,250 | +10% |
Across 300 US metros, Warner Robins comes in at #245 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Warner Robins is 2% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $2,900 – $6,950 | $4,950 | +4% |
| Augusta, GA | 231,930 jobs | $2,800 – $6,700 | $4,750 | level |
| Savannah, GA | 198,360 jobs | $2,800 – $6,650 | $4,700 | −1% |
| Columbus, GA | 116,380 jobs | $2,800 – $6,600 | $4,700 | −1% |
| Gainesville, GA | 103,870 jobs | $2,800 – $6,700 | $4,750 | level |
| Athens, GA | 95,800 jobs | $2,750 – $6,600 | $4,700 | −2% |
Cities with a workforce like Warner Robins's
Big cities and small ones price differently, so here is Warner Robins against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Racine, WI | 76,280 jobs | $3,250 – $8,150 | $5,700 | +20% |
| Kenosha, WI | 75,450 jobs | $3,400 – $8,300 | $5,850 | +23% |
| Napa, CA | 77,860 jobs | $3,600 – $9,100 | $6,350 | +34% |
| Abilene, TX | 75,070 jobs | $2,750 – $6,650 | $4,700 | −1% |
Extras that change the Warner Robins total
Extras are quoted nationally and then scaled to Warner Robins by the average of the local wage index (0.84) and goods index (0.96), a factor of 0.90. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $540 – $1,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,000 to $5,550 for Warner Robins, GA is attached.
Take this estimate with you: PDF report, $9
The report lays out the asphalt driveway numbers for Warner Robins, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Warner Robins: your questions
+How much does it cost to pave a driveway in Warner Robins?
For 600 sq ft, expect $2,800 to $6,700 in the Warner Robins area. A standard-spec job lands at $4,000 to $5,550. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Warner Robins?
About $4.60 to $11 per sq ft for materials and labor, plus $45 to $190 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Warner Robins or Macon?
Macon is 25 miles away. The midpoint for 600 sq ft there is $4,750, which is 0% less than Warner Robins ($4,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Warner Robins?
About 37% at the midpoint, or $1,800 out of $4,750. Materials are 60% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Warner Robins?
$2,800 to $6,700. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Warner Robins?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $190 for fees in the Warner Robins area (our national range of $50 to $200 scaled by the local price level).
+Is Warner Robins expensive for asphalt driveway compared with the rest of Georgia?
Warner Robins is 2% below the Georgia statewide estimate ($4,850 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Warner Robins?
BLS has no published metro figure here, so we use the statewide median of $22.16 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $18.92 to $23.66.
+What do basic and premium asphalt driveway work cost in Warner Robins?
For 600 sq ft, basic work runs $2,800 to $4,350 and premium work $5,150 to $6,700. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Warner Robins?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Warner Robins?
$540 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Warner Robins
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.