Skip to content
CostLocal

Concrete driveway cost in Florida

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$3,350 – $8,300
Per sq ft
$5.50 – $13.50
before permit
Versus US midpoint
−9%
US $6,450
Metros covered
19

Florida prices for concrete driveway: $3,350 to $8,300 for 600 sq ft, or $5.50 to $13.50 per sq ft without the permit. The state midpoint is 9% below the national one. Local wages for cement masons and concrete finishers are $23.40 an hour.

Inside Florida, the metros we cover range from $5,450 (Tallahassee) to $6,000 (Miami) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your concrete driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

5-inch with rebar and saw-cut joints, a border or one color

Add-ons

Estimated cost for 600 sq ft in Florida (statewide), standard level

$4,850 to $6,800

About $7.90 to $11 per sq ft before permits. Labor is about 66% of the bill.

Cost breakdown
PartLowHigh
Materials$1,650$2,050
Labor$3,100$4,600
Permits and fees$100$160
Total$4,850$6,800
Save and get a PDF report

Cost breakdown for 600 sq ft in Florida

Part of the jobLowMidpointHighShare
Materials$1,350$1,850$2,35032%
Labor$1,950$3,850$5,75066%
Permits and fees$50$130$2102%
Total$3,350$5,850$8,300100%

Florida versus the states around it

Florida ranks 39 of 51 (the 50 states plus DC) for concrete driveway, where 1 is the most expensive. The costliest is Hawaii at $9,600 and the cheapest Mississippi at $5,400, both for 600 sq ft at the midpoint. Florida sits at $5,850. The five states closest by workforce center are listed below.

States near Florida, same project and size
StateDistanceRangeMidpointvs. here
Georgia420 miles away$3,200 – $7,950$5,600−4%
South Carolina430 miles away$3,300 – $8,250$5,800−1%
Alabama480 miles away$3,100 – $7,700$5,400−7%
North Carolina540 miles away$3,300 – $8,150$5,750−2%
Mississippi550 miles away$3,100 – $7,650$5,400−8%

Why two Florida quotes can differ

  • Thickness

    HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.

  • Old driveway removal

    Tearing out the old surface adds about $2-$6 per sq ft, and some cities want the haul-off documented.

  • Grading and drainage

    Professional grading runs $3-$8 per sq ft or $700-$2,500 for a typical job. A sloped lot or poor soil raises it.

  • Finish

    Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).

  • Permits and the apron

    A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.

Weather windows across Florida

Weather decides when pouring concrete can happen, and Florida is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Miami has the longest comfortable season of the metros we cover in Florida at 12 months; Punta Gorda has the shortest at 7 (October through April). Rainfall runs from 46 inches a year in Lakeland to 68 inches in Pensacola.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Miami61885712: all year
Tampa5391498: October through May
Orlando5092518: October through May
Jacksonville4792489: September through May
North Port5193537: October through April
Cape Coral5492577: October through April
Lakeland5293467: October through April
Palm Bay4991569: September through May
Deltona5093508: October through May
Pensacola4492689: September through May
Tallahassee4192599: September through May
Naples5691508: October through May
Port St. Lucie51905110: September through June
Gainesville4391489: September through May
Crestview3992648: February through May and September through December
Ocala4692528: October through May
Panama City43916110: September through June
Sebastian52915310: September through June
Punta Gorda5193537: October through April

What cement masons and concrete finishers and the other trades earn in Florida

Florida's labor line is priced from 4 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.87 times the national level.

Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $23.40 an hour, 15% below the US median of $27.41. The middle half of them earn between $21.95 and $27.53 an hour. About 15,240 work in the state. That is 15.3 per 10,000 jobs, compared with 13.3 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $21.17 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.83 and $23.06 an hour. BLS counts 87,040 of them working in the state, 87.7 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $23.75 an hour, 17% below the US median of $28.78. The middle half of them earn between $22.27 and $28.06 an hour. About 27,510 work in the state. That is 27.7 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

Carpenters (47-2031), 10% of the weighting: a median of $23.98 an hour, 18% below the US median of $29.12. The middle half of them earn between $21.41 and $28.79 an hour. About 39,300 work in the state. That is 39.6 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

A crew paid at the 75th percentile for cement masons and concrete finishers ($27.53 an hour) would add about $330 to the statewide midpoint; one at the 25th percentile ($21.95) would take off about $120. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 9,929,860 jobs across Florida (May 2025), which is 6.4% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$21.95$23.40$27.53$27.410.85state
Construction laborers (47-2061)30%$17.83$21.17$23.06$22.660.93state
Operating engineers and other construction equipment operators (47-2073)10%$22.27$23.75$28.06$28.780.83state
Carpenters (47-2031)10%$21.41$23.98$28.79$29.120.82state
Blended100%0.87

Related projects, priced for Florida

Each project weights the trades differently, so Florida's wage level does not push every price by the same amount. Compared with the US midpoint, paver patio is −6% and concrete patio −7%.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$2,900 – $6,950−6%
Gravel driveway1,000 sq ft$2,300 – $9,500−7%
Concrete slab400 sq ft$2,250 – $4,900−6%
Stamped concrete400 sq ft$3,050 – $7,400−7%
Paver patio300 sq ft$2,800 – $5,150−6%
Concrete patio300 sq ft$1,200 – $3,700−7%

Basic, standard or premium: Florida prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from 1-car (12x20), 240 sq ft to 3-car (900 sq ft).

Basic

$3,350 to $5,350

Plain gray, 4-inch broom finish, flat site

Standard

$4,850 to $6,800

5-inch with rebar and saw-cut joints, a border or one color

Premium

$6,350 to $8,300

6-inch for heavy vehicles, stamped or colored, grading needed

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,350 – $2,200$2,000 – $2,850$2,600 – $3,450
2-car (20x24), 480 sq ft$2,700 – $4,300$3,900 – $5,500$5,100 – $6,700
2-car + apron (600 sq ft)$3,350 – $5,350$4,850 – $6,800$6,350 – $8,300
3-car (900 sq ft)$5,000 – $7,950$7,200 – $10,200$9,400 – $12,400

Concrete driveway cost by metro in Florida

3 of the 19 metros sit above the statewide midpoint of $5,850, and the top-to-bottom gap is 11%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
Miami, FL$3,450 – $8,600$6,000+3%
Naples, FL$3,350 – $8,450$5,900+1%
North Port, FL$3,350 – $8,400$5,900+1%
Tampa, FL$3,350 – $8,300$5,850level
Crestview, FL$3,350 – $8,300$5,800level
Jacksonville, FL$3,300 – $8,300$5,800−1%
Punta Gorda, FL$3,300 – $8,200$5,750−1%
Sebastian, FL$3,300 – $8,200$5,750−1%
Cape Coral, FL$3,300 – $8,200$5,750−1%
Palm Bay, FL$3,300 – $8,200$5,750−1%
Port St. Lucie, FL$3,300 – $8,150$5,750−2%
Deltona, FL$3,300 – $8,150$5,700−2%
Panama City, FL$3,250 – $8,150$5,700−2%
Pensacola, FL$3,250 – $8,100$5,700−2%
Orlando, FL$3,250 – $8,100$5,700−3%
Gainesville, FL$3,250 – $8,000$5,600−4%
Lakeland, FL$3,200 – $7,950$5,550−4%
Ocala, FL$3,150 – $7,850$5,500−6%
Tallahassee, FL$3,150 – $7,750$5,450−7%

Extras that change the Florida total

Add-ons start from national price ranges and are scaled by 0.93 for Florida, which is the average of the area's wage index (0.87) and goods price index (0.98). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add rebar reinforcement$560 – $1,650
Remove the old driveway$1,100 – $3,350

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,850 to $6,800 for Florida is attached.

Take this estimate with you: PDF report, $9

The report lays out the concrete driveway numbers for Florida line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete driveway in Florida: your questions

+How much does it cost to pour a concrete driveway in Florida?

$3,350 to $8,300 for 600 sq ft, using statewide wages and prices. Metro areas inside Florida can sit above or below that.

+Which city in Florida is cheapest for concrete driveway?

Tallahassee at about $5,450 (midpoint, 600 sq ft). The priciest is Miami at $6,000.

+Is concrete driveway cheaper in Florida than the US average?

It is 9% cheaper: $5,850 against $6,450 for 600 sq ft at the midpoint.

+What share of the price is labor in Florida?

About 66% ($3,850). Materials are 32%. Statewide labor for this job is weighted 0.87x the national wage level.

+What do cement masons and concrete finishers earn in Florida?

The BLS statewide median is $23.40 an hour, against $27.41 for the US. The 25th to 75th percentile range is $21.95 to $27.53.

+Where does Florida rank for concrete driveway costs?

39th most expensive of 51 (the 50 states plus DC) at the midpoint, $5,850 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium concrete driveway work cost in Florida?

For 600 sq ft, basic work runs $3,350 to $5,350 and premium work $6,350 to $8,300. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.

+Does the season matter for concrete driveway in Florida?

Yes where winters or summers are hard. Of the Florida metros we cover, Miami has the most comfortable months (12 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add rebar reinforcement" add in Florida?

$560 to $1,650 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Concrete driveway by city in Florida

Concrete driveway: all pricesFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.