Skip to content
CostLocal

Asphalt driveway cost in Nebraska

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$2,850 – $6,950
Per sq ft
$4.70 – $11.50
before permit
Versus US midpoint
−6%
US $5,250
Metros covered
2

Nebraska prices for asphalt driveway: $2,850 to $6,950 for 600 sq ft, or $4.70 to $11.50 per sq ft without the permit. The state midpoint is 6% below the national one. Local wages for paving, surfacing and tamping equipment operators are $22.00 an hour.

Inside Nebraska, the metros we cover range from $4,900 (Omaha) to $5,050 (Lincoln) at the midpoint.

Estimate your asphalt driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full new driveway: base, 2-3 in of hot mix, edging

Add-ons

Estimated cost for 600 sq ft in Nebraska (statewide), standard level

$4,100 to $5,700

About $6.65 to $9.30 per sq ft before permits. Labor is about 41% of the bill.

Cost breakdown
PartLowHigh
Materials$2,400$3,150
Labor$1,600$2,400
Permits and fees$85$140
Total$4,100$5,700
Save and get a PDF report

Cost breakdown for 600 sq ft in Nebraska

Part of the jobLowMidpointHighShare
Materials$1,850$2,800$3,75057%
Labor$960$2,000$3,05041%
Permits and fees$45$110$1802%
Total$2,850$4,900$6,950100%

Nebraska against its neighbors

Nebraska ranks 39 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. Nebraska sits at $4,900. The five states closest by workforce center are listed below.

States near Nebraska, same project and size
StateDistanceRangeMidpointvs. here
Iowa190 miles away$3,000 – $7,350$5,150+5%
South Dakota220 miles away$3,000 – $7,350$5,150+5%
Kansas220 miles away$2,850 – $6,850$4,850−1%
Missouri270 miles away$3,150 – $7,850$5,500+12%
Minnesota320 miles away$3,350 – $8,350$5,850+20%

Which Nebraska city is cheapest for asphalt driveway?

1 of the 2 metros sit above the statewide midpoint of $4,900, and the top-to-bottom gap is 2%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
Lincoln, NE$2,950 – $7,150$5,050+3%
Omaha, NE$2,850 – $6,950$4,900level

Related projects, priced for Nebraska

Each project weights the trades differently, so Nebraska's wage level does not push every price by the same amount. Compared with the US midpoint, paver patio is −3% and concrete driveway −8%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,400 – $8,500−8%
Gravel driveway1,000 sq ft$2,400 – $9,850−4%
Paver patio300 sq ft$2,900 – $5,300−3%
French drain60 linear ft$580 – $2,000−4%
Concrete slab400 sq ft$2,250 – $4,850−7%
Concrete patio300 sq ft$1,150 – $3,700−8%

Nebraska seasons and asphalt driveway

Weather decides when digging and ground work can happen, and Nebraska is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Every Nebraska metro on the list has 7 comfortable months, though rainfall ranges from 29 inches a year in Lincoln to 32 in Omaha.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Omaha1588327: April through October
Lincoln1489297: April through October

What paving, surfacing and tamping equipment operators and the other trades earn in Nebraska

Nebraska's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.94 times the national level.

Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $22.00 an hour, 14% below the US median of $25.64. The middle half of them earn between $20.91 and $25.71 an hour. About 390 work in the state. That is 3.8 per 10,000 jobs, compared with 2.7 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $22.72 an hour, which is in line with the national $22.66. The middle half of them earn between $19.38 and $26.71 an hour. BLS counts 8,530 of them working in the state, 83.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $28.06 an hour, in line with the US median of $28.78. The middle half of them earn between $23.05 and $30.52 an hour. About 3,180 work in the state. That is 31.0 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($25.71 an hour) would add about $120 to the statewide midpoint; one at the 25th percentile ($20.91) would take off about $35. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 1,024,370 jobs across Nebraska (May 2025), which is 0.7% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Paving, surfacing and tamping equipment operators (47-2071)40%$20.91$22.00$25.71$25.640.86state
Construction laborers (47-2061)30%$19.38$22.72$26.71$22.661.00state
Operating engineers and other construction equipment operators (47-2073)30%$23.05$28.06$30.52$28.780.97state
Blended100%0.94

Why two Nebraska quotes can differ

  • New versus overlay

    Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

  • Base work

    Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

  • Small jobs cost more per foot

    Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.

  • Hot-mix price

    Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).

  • Sealcoating

    Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.

Extras that change the Nebraska total

Add-ons start from national price ranges and are scaled by 0.94 for Nebraska, which is the average of the area's wage index (0.94) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add a sealcoat$560 – $1,150

Basic, standard or premium: Nebraska prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.

Basic

$2,850 to $4,500

New topcoat over a sound base, flat lot

Standard

$4,100 to $5,700

Full new driveway: base, 2-3 in of hot mix, edging

Premium

$5,300 to $6,950

Full tear-out and rebuild, drainage work, heavy-duty depth

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,150 – $1,850$1,700 – $2,350$2,200 – $2,900
20x20 (400 sq ft)$1,900 – $3,050$2,750 – $3,850$3,600 – $4,700
2-car (20x30), 600 sq ft$2,850 – $4,500$4,100 – $5,700$5,300 – $6,950
long rural (10x100), 1,000 sq ft$4,750 – $7,400$6,750 – $9,450$8,750 – $11,400

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,100 to $5,700 for Nebraska is attached.

A detailed PDF report of this estimate, $9

The report lays out the asphalt driveway numbers for Nebraska line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Asphalt driveway in Nebraska: your questions

+How much does it cost to pave a driveway in Nebraska?

$2,850 to $6,950 for 600 sq ft, using statewide wages and prices. Metro areas inside Nebraska can sit above or below that.

+Which city in Nebraska is cheapest for asphalt driveway?

Omaha at about $4,900 (midpoint, 600 sq ft). The priciest is Lincoln at $5,050.

+Is asphalt driveway cheaper in Nebraska than the US average?

It is 6% cheaper: $4,900 against $5,250 for 600 sq ft at the midpoint.

+What share of the price is labor in Nebraska?

About 41% ($2,000). Materials are 57%. Statewide labor for this job is weighted 0.94x the national wage level.

+What do paving, surfacing and tamping equipment operators earn in Nebraska?

The BLS statewide median is $22.00 an hour, against $25.64 for the US. The 25th to 75th percentile range is $20.91 to $25.71.

+Where does Nebraska rank for asphalt driveway costs?

39th most expensive of 51 (the 50 states plus DC) at the midpoint, $4,900 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium asphalt driveway work cost in Nebraska?

For 600 sq ft, basic work runs $2,850 to $4,500 and premium work $5,300 to $6,950. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.

+Does the season matter for asphalt driveway in Nebraska?

Yes where winters or summers are hard. Of the Nebraska metros we cover, Omaha has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add a sealcoat" add in Nebraska?

$560 to $1,150 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Asphalt driveway by city in Nebraska

Asphalt driveway: all pricesNebraska cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.