Skip to content
CostLocal

Asphalt driveway cost in Missouri

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$3,150 – $7,850
Per sq ft
$5.20 – $13
before permit
Versus US midpoint
+5%
US $5,250
Metros covered
6

Missouri prices for asphalt driveway: $3,150 to $7,850 for 600 sq ft, or $5.20 to $13 per sq ft without the permit. The state midpoint is 5% above the national one. Local wages for paving, surfacing and tamping equipment operators are $33.37 an hour.

Inside Missouri, the metros we cover range from $4,850 (Springfield) to $6,050 (St. Louis) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your asphalt driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full new driveway: base, 2-3 in of hot mix, edging

Add-ons

Estimated cost for 600 sq ft in Missouri (statewide), standard level

$4,550 to $6,450

About $7.45 to $10.50 per sq ft before permits. Labor is about 46% of the bill.

Cost breakdown
PartLowHigh
Materials$2,500$3,250
Labor$2,000$3,050
Permits and fees$85$140
Total$4,550$6,450
Save and get a PDF report

Cost breakdown for 600 sq ft in Missouri

Part of the jobLowMidpointHighShare
Materials$1,900$2,850$3,80052%
Labor$1,200$2,500$3,85046%
Permits and fees$45$110$1802%
Total$3,150$5,500$7,850100%

Weather windows across Missouri

Weather decides when digging and ground work can happen, and Missouri is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Springfield has the longest comfortable season of the metros we cover in Missouri at 9 months (March through November); Joplin has the shortest at 7 (March through June and September through November). Rainfall runs from 38 inches a year in Kansas City to 47 inches in Springfield.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
St. Louis2590448: March through June and August through November
Kansas City2290388: March through June and August through November
Springfield2388479: March through November
Columbia2389459: March through November
Joplin2590467: March through June and September through November
Jefferson City2389409: March through November

Missouri metro-by-metro prices

1 of the 6 metros sit above the statewide midpoint of $5,500, and the top-to-bottom gap is 24%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
St. Louis, MO$3,450 – $8,700$6,050+10%
Jefferson City, MO$3,100 – $7,750$5,450−1%
Columbia, MO$3,100 – $7,700$5,400−2%
Kansas City, MO$3,050 – $7,600$5,350−3%
Joplin, MO$3,050 – $7,500$5,250−4%
Springfield, MO$2,850 – $6,900$4,850−11%

Optional extras in Missouri

Add-ons start from national price ranges and are scaled by 1.07 for Missouri, which is the average of the area's wage index (1.19) and goods price index (0.96). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add a sealcoat$640 – $1,300

Other Missouri jobs that often go with asphalt driveway

Each project weights the trades differently, so Missouri's wage level does not push every price by the same amount. Compared with the US midpoint, paver patio is +7% and concrete slab +2%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,800 – $9,750+6%
Gravel driveway1,000 sq ft$2,600 – $10,500+3%
Paver patio300 sq ft$3,200 – $5,850+7%
French drain60 linear ft$620 – $2,200+4%
Concrete slab400 sq ft$2,500 – $5,250+2%
Concrete patio300 sq ft$1,250 – $4,150+3%

Why two Missouri quotes can differ

  • New versus overlay

    Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

  • Base work

    Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

  • Small jobs cost more per foot

    Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.

  • Hot-mix price

    Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).

  • Sealcoating

    Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.

Basic, standard or premium: Missouri prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.

Basic

$3,150 to $5,050

New topcoat over a sound base, flat lot

Standard

$4,550 to $6,450

Full new driveway: base, 2-3 in of hot mix, edging

Premium

$5,950 to $7,850

Full tear-out and rebuild, drainage work, heavy-duty depth

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,300 – $2,050$1,900 – $2,650$2,450 – $3,250
20x20 (400 sq ft)$2,100 – $3,400$3,050 – $4,350$4,000 – $5,300
2-car (20x30), 600 sq ft$3,150 – $5,050$4,550 – $6,450$5,950 – $7,850
long rural (10x100), 1,000 sq ft$5,250 – $8,300$7,550 – $10,600$9,850 – $12,900

Missouri versus the states around it

Missouri ranks 14 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. Missouri sits at $5,500. The five states closest by workforce center are listed below.

States near Missouri, same project and size
StateDistanceRangeMidpointvs. here
Iowa220 miles away$3,000 – $7,350$5,150−6%
Arkansas230 miles away$2,700 – $6,450$4,600−17%
Kansas250 miles away$2,850 – $6,850$4,850−12%
Nebraska270 miles away$2,850 – $6,950$4,900−11%
Illinois310 miles away$3,550 – $8,950$6,250+14%

What paving, surfacing and tamping equipment operators and the other trades earn in Missouri

Missouri's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.19 times the national level.

Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $33.37 an hour, 30% above the US median of $25.64. The middle half of them earn between $23.52 and $44.43 an hour. About 1,560 work in the state. That is 5.3 per 10,000 jobs, compared with 2.7 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $27.28 an hour, which is 20% above the national $22.66. The middle half of them earn between $21.93 and $37.30 an hour. BLS counts 17,050 of them working in the state, 58.1 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $29.10 an hour, in line with the US median of $28.78. The middle half of them earn between $23.21 and $40.58 an hour. About 10,470 work in the state. That is 35.7 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.

A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($44.43 an hour) would add about $370 to the statewide midpoint; one at the 25th percentile ($23.52) would take off about $330. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 2,936,050 jobs across Missouri (May 2025), which is 1.9% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Paving, surfacing and tamping equipment operators (47-2071)40%$23.52$33.37$44.43$25.641.30state
Construction laborers (47-2061)30%$21.93$27.28$37.30$22.661.20state
Operating engineers and other construction equipment operators (47-2073)30%$23.21$29.10$40.58$28.781.01state
Blended100%1.19

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,550 to $6,450 for Missouri is attached.

Detailed asphalt driveway report for Missouri, $9

The report lays out the asphalt driveway numbers for Missouri line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Asphalt driveway in Missouri: your questions

+How much does it cost to pave a driveway in Missouri?

$3,150 to $7,850 for 600 sq ft, using statewide wages and prices. Metro areas inside Missouri can sit above or below that.

+Which city in Missouri is cheapest for asphalt driveway?

Springfield at about $4,850 (midpoint, 600 sq ft). The priciest is St. Louis at $6,050.

+Is asphalt driveway cheaper in Missouri than the US average?

It is 5% more expensive: $5,500 against $5,250 for 600 sq ft at the midpoint.

+What share of the price is labor in Missouri?

About 46% ($2,500). Materials are 52%. Statewide labor for this job is weighted 1.19x the national wage level.

+What do paving, surfacing and tamping equipment operators earn in Missouri?

The BLS statewide median is $33.37 an hour, against $25.64 for the US. The 25th to 75th percentile range is $23.52 to $44.43.

+Where does Missouri rank for asphalt driveway costs?

14th most expensive of 51 (the 50 states plus DC) at the midpoint, $5,500 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium asphalt driveway work cost in Missouri?

For 600 sq ft, basic work runs $3,150 to $5,050 and premium work $5,950 to $7,850. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.

+Does the season matter for asphalt driveway in Missouri?

Yes where winters or summers are hard. Of the Missouri metros we cover, Springfield has the most comfortable months (9 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add a sealcoat" add in Missouri?

$640 to $1,300 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Asphalt driveway by city in Missouri

Asphalt driveway: all pricesMissouri cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.