Skip to content
CostLocal

Asphalt driveway cost in South Dakota

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$3,000 – $7,350
Per sq ft
$4.90 – $12
before permit
Versus US midpoint
−1%
US $5,250
Metros covered
2

What does it cost to pave a driveway in South Dakota? Plan on $3,000 to $7,350 for 600 sq ft. Wages (1.04x the US blend), materials (price index 95.5) and permit costs (88.6) put the state below the national midpoint by 1%.

Inside South Dakota, the metros we cover range from $5,150 (Sioux Falls) to $5,150 (Rapid City) at the midpoint.

Estimate your asphalt driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full new driveway: base, 2-3 in of hot mix, edging

Add-ons

Estimated cost for 600 sq ft in South Dakota (statewide), standard level

$4,300 to $6,050

About $7 to $9.80 per sq ft before permits. Labor is about 43% of the bill.

Cost breakdown
PartLowHigh
Materials$2,450$3,200
Labor$1,750$2,700
Permits and fees$85$140
Total$4,300$6,050
Save and get a PDF report

Cost breakdown for 600 sq ft in South Dakota

Part of the jobLowMidpointHighShare
Materials$1,900$2,850$3,80055%
Labor$1,050$2,200$3,35043%
Permits and fees$45$110$1802%
Total$3,000$5,150$7,350100%

Extras that change the South Dakota total

Extras are quoted nationally and then scaled to South Dakota by the average of the local wage index (1.04) and goods index (0.95), a factor of 1.00. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add a sealcoat$600 – $1,200

Related projects, priced for South Dakota

The table prices neighboring jobs at their usual sizes using statewide South Dakota wages and prices. Against national midpoints, French drain comes out highest (−3%) and concrete driveway lowest (−10%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,300 – $8,300−10%
Gravel driveway1,000 sq ft$2,400 – $9,850−3%
Paver patio300 sq ft$2,850 – $5,200−5%
French drain60 linear ft$580 – $2,050−3%
Concrete slab400 sq ft$2,250 – $4,800−8%
Concrete patio300 sq ft$1,150 – $3,650−9%

Quality levels and sizes in South Dakota

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide South Dakota wages and prices. The grid prices the same bands at 4 common sizes.

Basic

$3,000 to $4,750

New topcoat over a sound base, flat lot

Standard

$4,300 to $6,050

Full new driveway: base, 2-3 in of hot mix, edging

Premium

$5,600 to $7,350

Full tear-out and rebuild, drainage work, heavy-duty depth

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,200 – $1,950$1,750 – $2,500$2,300 – $3,050
20x20 (400 sq ft)$2,000 – $3,200$2,900 – $4,050$3,750 – $4,950
2-car (20x30), 600 sq ft$3,000 – $4,750$4,300 – $6,050$5,600 – $7,350
long rural (10x100), 1,000 sq ft$4,950 – $7,800$7,100 – $9,950$9,250 – $12,100

When South Dakota weather lets you pave

Season matters for asphalt driveway. For each South Dakota metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for digging and ground work.

Every South Dakota metro on the list has 7 comfortable months, though rainfall ranges from 20 inches a year in Rapid City to 28 in Sioux Falls.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Sioux Falls985287: April through October
Rapid City1684207: April through October

South Dakota metro-by-metro prices

0 of the 2 metros sit above the statewide midpoint of $5,150, and the top-to-bottom gap is 0%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
Rapid City, SD$3,000 – $7,350$5,150level
Sioux Falls, SD$3,000 – $7,350$5,150level

Asphalt driveway: what moves the price in South Dakota

  • New versus overlay

    Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

  • Base work

    Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

  • Small jobs cost more per foot

    Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.

  • Hot-mix price

    Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).

  • Sealcoating

    Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.

How South Dakota compares with nearby states

South Dakota ranks 29 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. South Dakota sits at $5,150. The five states closest by workforce center are listed below.

States near South Dakota, same project and size
StateDistanceRangeMidpointvs. here
Nebraska220 miles away$2,850 – $6,950$4,900−5%
North Dakota220 miles away$3,000 – $7,300$5,150−1%
Minnesota290 miles away$3,350 – $8,350$5,850+14%
Iowa330 miles away$3,000 – $7,350$5,150level
Wyoming350 miles away$3,000 – $7,350$5,150level

South Dakota labor market for asphalt driveway

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.04 for South Dakota.

For paving, surfacing and tamping equipment operators (47-2071, weighted 40%) the local median is $28.92 an hour, which is 13% above the national $25.64. The middle half of them earn between $26.36 and $33.50 an hour. BLS counts 130 of them working in the state, 2.8 for every 10,000 jobs (US: 2.7), so the local bench is about average.

Construction laborers (47-2061), 30% of the weighting: a median of $21.98 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.42 and $23.14 an hour. About 1,780 work in the state. That is 38.9 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $28.61 an hour, which is in line with the national $28.78. The middle half of them earn between $24.37 and $30.51 an hour. BLS counts 2,050 of them working in the state, 44.8 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($33.50 an hour) would add about $150 to the statewide midpoint; one at the 25th percentile ($26.36) would take off about $85. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 457,380 jobs across South Dakota (May 2025), which is 0.3% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Paving, surfacing and tamping equipment operators (47-2071)40%$26.36$28.92$33.50$25.641.13state
Construction laborers (47-2061)30%$18.42$21.98$23.14$22.660.97state
Operating engineers and other construction equipment operators (47-2073)30%$24.37$28.61$30.51$28.780.99state
Blended100%1.04

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,300 to $6,050 for South Dakota is attached.

A detailed PDF report of this estimate, $9

Multi-page report for South Dakota: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Asphalt driveway in South Dakota: your questions

+How much does it cost to pave a driveway in South Dakota?

$3,000 to $7,350 for 600 sq ft, using statewide wages and prices. Metro areas inside South Dakota can sit above or below that.

+Which city in South Dakota is cheapest for asphalt driveway?

Sioux Falls at about $5,150 (midpoint, 600 sq ft). The priciest is Rapid City at $5,150.

+Is asphalt driveway cheaper in South Dakota than the US average?

It is 1% cheaper: $5,150 against $5,250 for 600 sq ft at the midpoint.

+What share of the price is labor in South Dakota?

About 43% ($2,200). Materials are 55%. Statewide labor for this job is weighted 1.04x the national wage level.

+What do paving, surfacing and tamping equipment operators earn in South Dakota?

The BLS statewide median is $28.92 an hour, against $25.64 for the US. The 25th to 75th percentile range is $26.36 to $33.50.

+Where does South Dakota rank for asphalt driveway costs?

29th most expensive of 51 (the 50 states plus DC) at the midpoint, $5,150 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium asphalt driveway work cost in South Dakota?

For 600 sq ft, basic work runs $3,000 to $4,750 and premium work $5,600 to $7,350. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.

+Does the season matter for asphalt driveway in South Dakota?

Yes where winters or summers are hard. Of the South Dakota metros we cover, Sioux Falls has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add a sealcoat" add in South Dakota?

$600 to $1,200 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Asphalt driveway by city in South Dakota

Asphalt driveway: all pricesSouth Dakota cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.