Vinyl fence cost in Youngstown, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,650
- Per linear ft
- $28.50 – $57
- before permit
- Versus US midpoint
- −5%
- US $6,850
- Rank of 300 metros
- #188
- 1 = most expensive
Youngstown homeowners pay roughly $4,300 to $8,650 to install a vinyl fence at 150 linear ft, or $28.50 to $57 per linear ft (permit not included). Against the US midpoint, Youngstown is 5% lower. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Youngstown, OH, standard level
$5,600 to $7,350
About $37 to $48.50 per linear ft before permits. Labor is about 23% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,200 | $1,750 |
| Permits and fees | $65 | $100 |
| Total | $5,600 | $7,350 |
Cost breakdown for 150 linear ft in Youngstown, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,300 | 76% |
| Labor | $740 | $1,500 | $2,200 | 23% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $4,300 | $6,500 | $8,650 | 100% |
Where the Youngstown price comes from
Labor is 23% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Youngstown the blended ratio comes out at 0.99.
On the materials line, the BEA goods price index for the Youngstown metro is 93.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (87.4) and land at $35 to $130.
Youngstown against nearby metros and the rest of Ohio
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,500 to $6,950 across Youngstown and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Youngstown, OHthis page | $4,300 – $8,650 | $6,500 | |
| Akron, OH30 miles | $4,400 – $9,000 | $6,700 | +3% |
| Canton, OH40 miles | $4,300 – $8,800 | $6,550 | +1% |
| Cleveland, OH45 miles | $4,400 – $8,950 | $6,650 | +3% |
| Pittsburgh, PA70 miles | $4,600 – $9,300 | $6,950 | +7% |
| Erie, PA75 miles | $4,550 – $9,100 | $6,800 | +5% |
| Ohio (statewide) | $4,350 – $8,950 | $6,650 | +3% |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Across 300 US metros, Youngstown comes in at #188 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Youngstown is 3% below the Ohio figure.
Other Ohio metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $4,450 – $9,150 | $6,800 | +5% |
| Cincinnati, OH | 1,101,030 jobs | $4,350 – $8,900 | $6,650 | +2% |
| Cleveland, OH | 1,031,130 jobs | $4,400 – $8,950 | $6,650 | +3% |
| Dayton, OH | 372,660 jobs | $4,350 – $8,800 | $6,550 | +1% |
| Akron, OH | 319,560 jobs | $4,400 – $9,000 | $6,700 | +3% |
| Toledo, OH | 291,530 jobs | $4,350 – $8,800 | $6,550 | +1% |
Cities with a workforce like Youngstown's
Big cities and small ones price differently, so here is Youngstown against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Waterbury, CT | 160,710 jobs | $4,550 – $9,250 | $6,900 | +6% |
| Gulfport, MS | 158,310 jobs | $4,250 – $8,500 | $6,350 | −2% |
| Shreveport, LA | 162,750 jobs | $4,150 – $8,250 | $6,200 | −4% |
| Eugene, OR | 157,710 jobs | $4,750 – $9,550 | $7,150 | +10% |
Cost by quality level and size in Youngstown
Three bands are cut from the same cited range and localized for Youngstown wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,300 to $6,050
4-ft picket or ranch rail
Standard
$5,600 to $7,350
6-ft privacy fence, standard white
Premium
$6,900 to $8,650
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,050 | $3,750 – $4,950 | $4,650 – $5,800 |
| 150 ft (150 linear ft) | $4,300 – $6,050 | $5,600 – $7,350 | $6,900 – $8,650 |
| 200 ft (200 linear ft) | $5,700 – $8,050 | $7,450 – $9,750 | $9,200 – $11,500 |
| full lot (300 linear ft) | $8,550 – $12,000 | $11,100 – $14,600 | $13,700 – $17,200 |
What nearby projects cost in Youngstown
Because every project leans on different trades, Youngstown's wage level does not move all prices equally. Against the US midpoint, concrete slab runs −2% and wood fence −5%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,900 – $7,250 | −5% |
| Chain-link fence | 150 linear ft | $1,450 – $6,000 | −3% |
| Aluminum fence | 150 linear ft | $3,650 – $10,900 | −5% |
| Concrete slab | 400 sq ft | $2,400 – $5,050 | −2% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Youngstown is 0.99 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $27.39 an hour, which is 6% below the national $29.12. The middle half of them earn between $21.75 and $35.03 an hour. BLS counts 460 of them working in the area, 28.7 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $23.36 an hour, 3% above the US median of $22.66. The middle half of them earn between $18.83 and $31.39 an hour. About 850 work in the metro. That is 53.1 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($35.03 an hour) instead of the median, the labor line grows by about $200. At the 25th percentile ($21.75) it shrinks by about $150. The total moves by 3.0% or 2.2%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 160,160 jobs in the Youngstown-Warren area. That makes it the 148th largest of the 300 metros we cover, with 0.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.75 | $27.39 | $35.03 | $29.12 | 0.94 | metro |
| Construction laborers (47-2061) | 50% | $18.83 | $23.36 | $31.39 | $22.66 | 1.03 | metro |
| Blended | 100% | 0.99 | |||||
Vinyl fence: what moves the price in Youngstown
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Add-ons priced for Youngstown
Extras are quoted nationally and then scaled to Youngstown by the average of the local wage index (0.99) and goods index (0.94), a factor of 0.96. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $750 |
| Remove old fence | $1,450 – $2,900 |
When to schedule vinyl fence in Youngstown
We use NOAA's 1991-2020 climate normals for Youngstown Rgnl Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Youngstown (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Youngstown gets about 41 inches of precipitation in a normal year, including roughly 68 inches of snow. The wettest months are June, July and September (4.3 inches in July). Inside the workable window, March and November are the driest, at 3.2 and 3.0 inches. The station averages about 8 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 34 | 19 | 3.0 | Cold |
| Feb | 37 | 21 | 2.5 | Cold |
| Mar | 47 | 28 | 3.2 | Workable |
| Apr | 60 | 38 | 3.8 | Workable |
| May | 71 | 48 | 3.7 | Workable |
| Jun | 79 | 56 | 3.9 | Workable |
| Jul | 83 | 60 | 4.3 | Workable |
| Aug | 81 | 59 | 3.5 | Workable |
| Sep | 74 | 52 | 3.8 | Workable |
| Oct | 62 | 42 | 3.3 | Workable |
| Nov | 50 | 33 | 3.0 | Workable |
| Dec | 39 | 26 | 3.2 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,350 for Youngstown, OH is attached.
Take this estimate with you: PDF report, $9
The report lays out the vinyl fence numbers for Youngstown, OH line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Youngstown: your questions
+How much does it cost to install a vinyl fence in Youngstown?
For 150 linear ft, expect $4,300 to $8,650 in the Youngstown area. A standard-spec job lands at $5,600 to $7,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Youngstown?
About $28.50 to $57 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Youngstown or Akron?
Akron is 30 miles away. The midpoint for 150 linear ft there is $6,700, which is 3% more than Youngstown ($6,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Youngstown?
About 23% at the midpoint, or $1,500 out of $6,500. Materials are 76% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Youngstown?
$5,700 to $11,500. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Youngstown?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Youngstown area (our national range of $40 to $150 scaled by the local price level).
+Is Youngstown expensive for vinyl fence compared with the rest of Ohio?
Youngstown is 3% below the Ohio statewide estimate ($6,650 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do carpenters earn in Youngstown?
The BLS median is $27.39 an hour in the Youngstown area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.75 to $35.03.
+What do basic and premium vinyl fence work cost in Youngstown?
For 150 linear ft, basic work runs $4,300 to $6,050 and premium work $6,900 to $8,650. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Youngstown?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Youngstown?
$140 to $750, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Youngstown
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.