Vinyl fence cost in Pittsburgh, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,600 – $9,300
- Per linear ft
- $30.50 – $61
- before permit
- Versus US midpoint
- +1%
- US $6,850
- Rank of 300 metros
- #58
- 1 = most expensive
Local price for a vinyl fence in the Pittsburgh area: $4,600 to $9,300 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $29.41 an hour in the Pittsburgh area, 1% above the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Pittsburgh, PA, standard level
$6,000 to $7,900
About $39.50 to $52 per linear ft before permits. Labor is about 23% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,700 | $5,900 |
| Labor | $1,250 | $1,900 |
| Permits and fees | $70 | $110 |
| Total | $6,000 | $7,900 |
Cost breakdown for 150 linear ft in Pittsburgh, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,800 | $5,300 | $6,800 | 76% |
| Labor | $780 | $1,550 | $2,350 | 23% |
| Permits and fees | $40 | $90 | $140 | 1% |
| Total | $4,600 | $6,950 | $9,300 | 100% |
What is behind the Pittsburgh number
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Pittsburgh wages are 1.04 times the national level. Labor makes up about 23% of the midpoint estimate (22% at national prices).
Materials are scaled with BEA's regional price parity for goods. Pittsburgh is at 100.7 against 100 for the US, so a materials line of $5,250 nationally becomes $5,300 here (midpoint, 150 linear ft). Permits follow the all-items index of 94.7: $40 to $140.
Cost by quality level and size in Pittsburgh
The cited range is split into basic, standard and premium bands, then scaled to Pittsburgh. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,600 to $6,450
4-ft picket or ranch rail
Standard
$6,000 to $7,900
6-ft privacy fence, standard white
Premium
$7,400 to $9,300
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,100 – $4,350 | $4,000 – $5,300 | $4,950 – $6,250 |
| 150 ft (150 linear ft) | $4,600 – $6,450 | $6,000 – $7,900 | $7,400 – $9,300 |
| 200 ft (200 linear ft) | $6,100 – $8,600 | $8,000 – $10,500 | $9,850 – $12,300 |
| full lot (300 linear ft) | $9,150 – $12,900 | $11,900 – $15,600 | $14,700 – $18,400 |
What nearby projects cost in Pittsburgh
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Pittsburgh wage and price inputs. Compared with national midpoints, concrete slab comes out highest (+3%) and aluminum fence lowest (+1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,100 – $7,800 | +2% |
| Chain-link fence | 150 linear ft | $1,550 – $6,350 | +3% |
| Aluminum fence | 150 linear ft | $3,850 – $11,500 | +1% |
| Concrete slab | 400 sq ft | $2,550 – $5,350 | +3% |
Vinyl fence: what moves the price in Pittsburgh
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Add-ons priced for Pittsburgh
Add-ons start from national price ranges and are scaled by 1.02 for Pittsburgh, which is the average of the area's wage index (1.04) and goods price index (1.01). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $800 |
| Remove old fence | $1,550 – $3,050 |
Who does the work: Pittsburgh trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Pittsburgh the blend is 1.04.
Carpenters (47-2031), 50% of the weighting: a median of $29.41 an hour, in line with the US median of $29.12. The middle half of them earn between $23.40 and $38.14 an hour. About 5,920 work in the metro. That is 53.1 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $24.33 an hour, which is 7% above the national $22.66. The middle half of them earn between $21.96 and $29.94 an hour. BLS counts 8,620 of them working in the area, 77.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $220 to the midpoint estimate; the 25th percentile takes off about $150. That is a swing of roughly 2.2% to 3.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Pittsburgh has 1,114,490 jobs in total (BLS, May 2025), ranking 29th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $23.40 | $29.41 | $38.14 | $29.12 | 1.01 | metro |
| Construction laborers (47-2061) | 50% | $21.96 | $24.33 | $29.94 | $22.66 | 1.07 | metro |
| Blended | 100% | 1.04 | |||||
How Pittsburgh compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,450 to $6,950 across Pittsburgh and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Pittsburgh, PAthis page | $4,600 – $9,300 | $6,950 | |
| Wheeling, WV60 miles | $4,350 – $8,650 | $6,500 | −6% |
| Morgantown, WV65 miles | $4,300 – $8,600 | $6,450 | −7% |
| Youngstown, OH70 miles | $4,300 – $8,650 | $6,500 | −7% |
| Canton, OH75 miles | $4,300 – $8,800 | $6,550 | −6% |
| Altoona, PA80 miles | $4,550 – $9,100 | $6,800 | −2% |
| Pennsylvania (statewide) | $4,550 – $9,150 | $6,850 | −2% |
| United States | $4,550 – $9,150 | $6,850 | −1% |
Out of the 300 metros we cover, Pittsburgh ranks #58 for the cost of this job (#1 is the most expensive). Statewide, Pittsburgh is 2% above the Pennsylvania figure.
Elsewhere in Pennsylvania
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $4,500 – $9,150 | $6,800 | −2% |
| Allentown, PA | 377,180 jobs | $4,550 – $9,200 | $6,900 | −1% |
| Harrisburg, PA | 335,010 jobs | $4,550 – $9,200 | $6,900 | −1% |
| Scranton, PA | 255,620 jobs | $4,550 – $9,200 | $6,900 | −1% |
| Lancaster, PA | 252,230 jobs | $4,550 – $9,150 | $6,850 | −1% |
| York, PA | 183,590 jobs | $4,600 – $9,250 | $6,900 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Pittsburgh against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| San Antonio, TX | 1,126,880 jobs | $4,150 – $8,300 | $6,250 | −10% |
| Columbus, OH | 1,105,580 jobs | $4,450 – $9,150 | $6,800 | −2% |
| San Jose, CA | 1,134,970 jobs | $5,050 – $10,400 | $7,700 | +11% |
| Indianapolis, IN | 1,105,170 jobs | $4,400 – $8,950 | $6,650 | −4% |
The best months for vinyl fence in Pittsburgh
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Pittsburgh Allegheny Co Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Pittsburgh are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Pittsburgh gets about 41 inches of precipitation in a normal year. The wettest months are May, June and July (4.6 inches in June). Inside the workable window, October and November are the driest, at 3.1 and 3.0 inches. The station averages about 8 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 22 | 3.1 | Cold |
| Feb | 40 | 24 | 2.6 | Cold |
| Mar | 49 | 31 | 3.2 | Workable |
| Apr | 63 | 42 | 3.4 | Workable |
| May | 72 | 52 | 4.1 | Workable |
| Jun | 79 | 60 | 4.6 | Workable |
| Jul | 83 | 64 | 3.9 | Workable |
| Aug | 81 | 63 | 3.8 | Workable |
| Sep | 75 | 56 | 3.5 | Workable |
| Oct | 63 | 45 | 3.1 | Workable |
| Nov | 51 | 35 | 3.0 | Workable |
| Dec | 41 | 28 | 3.0 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,000 to $7,900 for Pittsburgh, PA is attached.
Take this estimate with you: PDF report, $9
The report lays out the vinyl fence numbers for Pittsburgh, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Pittsburgh: your questions
+How much does it cost to install a vinyl fence in Pittsburgh?
For 150 linear ft, expect $4,600 to $9,300 in the Pittsburgh area. A standard-spec job lands at $6,000 to $7,900. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Pittsburgh?
About $30.50 to $61 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Pittsburgh or Wheeling?
Wheeling is 60 miles away. The midpoint for 150 linear ft there is $6,500, which is 6% less than Pittsburgh ($6,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Pittsburgh?
About 23% at the midpoint, or $1,550 out of $6,950. Materials are 76% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Pittsburgh?
$6,100 to $12,300. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Pittsburgh?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Pittsburgh area (our national range of $40 to $150 scaled by the local price level).
+Is Pittsburgh expensive for vinyl fence compared with the rest of Pennsylvania?
Pittsburgh is 2% above the Pennsylvania statewide estimate ($6,850 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do carpenters earn in Pittsburgh?
The BLS median is $29.41 an hour in the Pittsburgh area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.40 to $38.14.
+What do basic and premium vinyl fence work cost in Pittsburgh?
For 150 linear ft, basic work runs $4,600 to $6,450 and premium work $7,400 to $9,300. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Pittsburgh?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Pittsburgh?
$150 to $800, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Pittsburgh
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.