Vinyl fence cost in Ohio
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (150 linear ft)
- $4,350 – $8,950
- Per linear ft
- $29 – $58.50
- before permit
- Versus US midpoint
- −3%
- US $6,850
- Metros covered
- 8
Across Ohio, a vinyl fence costs about $4,350 to $8,950 for 150 linear ft. Statewide, that midpoint is 3% below the US figure of $6,850. Carpenters earn a median $29.24 an hour in Ohio (US: $29.12).
Inside Ohio, the metros we cover range from $6,500 (Youngstown) to $6,800 (Columbus) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Ohio (statewide), standard level
$5,750 to $7,550
About $38 to $49.50 per linear ft before permits. Labor is about 25% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,300 | $1,950 |
| Permits and fees | $70 | $110 |
| Total | $5,750 | $7,550 |
Cost breakdown for 150 linear ft in Ohio
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,300 | 74% |
| Labor | $820 | $1,650 | $2,450 | 25% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $4,350 | $6,650 | $8,950 | 100% |
Quality levels and sizes in Ohio
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Ohio wages and prices. The grid prices the same bands at 4 common sizes.
Basic
$4,350 to $6,200
4-ft picket or ranch rail
Standard
$5,750 to $7,550
6-ft privacy fence, standard white
Premium
$7,100 to $8,950
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,950 – $4,150 | $3,850 – $5,100 | $4,750 – $6,000 |
| 150 ft (150 linear ft) | $4,350 – $6,200 | $5,750 – $7,550 | $7,100 – $8,950 |
| 200 ft (200 linear ft) | $5,800 – $8,250 | $7,650 – $10,000 | $9,450 – $11,900 |
| full lot (300 linear ft) | $8,700 – $12,300 | $11,400 – $15,000 | $14,100 – $17,700 |
Ohio versus the states around it
Ohio ranks 27 of 51 (the 50 states plus DC) for vinyl fence, where 1 is the most expensive. The costliest is Hawaii at $8,250 and the cheapest Arkansas at $6,200, both for 150 linear ft at the midpoint. Ohio sits at $6,650. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| West Virginia | 130 miles away | $4,300 – $8,550 | $6,450 | −3% |
| Michigan | 180 miles away | $4,400 – $8,950 | $6,700 | level |
| Indiana | 180 miles away | $4,400 – $8,950 | $6,700 | level |
| Kentucky | 210 miles away | $4,300 – $8,700 | $6,500 | −2% |
| Illinois | 280 miles away | $4,900 – $10,100 | $7,500 | +13% |
Optional extras in Ohio
Extras are quoted nationally and then scaled to Ohio by the average of the local wage index (1.10) and goods index (0.94), a factor of 1.02. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $790 |
| Remove old fence | $1,550 – $3,050 |
If you are planning more than one job in Ohio
The table prices neighboring jobs at their usual sizes using statewide Ohio wages and prices. Against national midpoints, chain-link fence comes out highest (+4%) and wood fence lowest (level), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,050 – $7,600 | level |
| Chain-link fence | 150 linear ft | $1,550 – $6,500 | +4% |
| Aluminum fence | 150 linear ft | $3,800 – $11,400 | level |
| Concrete slab | 400 sq ft | $2,500 – $5,250 | +1% |
Vinyl fence: what moves the price in Ohio
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Ohio metro-by-metro prices
2 of the 8 metros sit above the statewide midpoint of $6,650, and the top-to-bottom gap is 5%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (150 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Columbus, OH | $4,450 – $9,150 | $6,800 | +2% |
| Akron, OH | $4,400 – $9,000 | $6,700 | +1% |
| Cleveland, OH | $4,400 – $8,950 | $6,650 | level |
| Cincinnati, OH | $4,350 – $8,900 | $6,650 | level |
| Dayton, OH | $4,350 – $8,800 | $6,550 | −1% |
| Toledo, OH | $4,350 – $8,800 | $6,550 | −1% |
| Canton, OH | $4,300 – $8,800 | $6,550 | −1% |
| Youngstown, OH | $4,300 – $8,650 | $6,500 | −3% |
Wages behind the Ohio number
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 2 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.10 for Ohio.
For carpenters (47-2031, weighted 50%) the local median is $29.24 an hour, which is in line with the national $29.12. The middle half of them earn between $23.42 and $36.47 an hour. BLS counts 18,450 of them working in the state, 33.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $26.96 an hour, 19% above the US median of $22.66. The middle half of them earn between $22.09 and $35.76 an hour. About 31,910 work in the state. That is 57.5 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
A crew paid at the 75th percentile for carpenters ($36.47 an hour) would add about $190 to the statewide midpoint; one at the 25th percentile ($23.42) would take off about $150. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 5,550,180 jobs across Ohio (May 2025), which is 3.6% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $23.42 | $29.24 | $36.47 | $29.12 | 1.00 | state |
| Construction laborers (47-2061) | 50% | $22.09 | $26.96 | $35.76 | $22.66 | 1.19 | state |
| Blended | 100% | 1.10 | |||||
Weather windows across Ohio
Season matters for vinyl fence. For each Ohio metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.
Cincinnati has the longest comfortable season of the metros we cover in Ohio at 11 months (February through December); Youngstown has the shortest at 9 (March through November). Rainfall runs from 32 inches a year in Toledo to 43 inches in Cincinnati.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Columbus | 22 | 85 | 42 | 9: March through November |
| Cincinnati | 24 | 87 | 43 | 11: February through December |
| Cleveland | 24 | 81 | 33 | 9: March through November |
| Dayton | 20 | 87 | 42 | 9: March through November |
| Akron | 21 | 85 | 33 | 9: March through November |
| Toledo | 20 | 85 | 32 | 9: March through November |
| Canton | 20 | 84 | 42 | 9: March through November |
| Youngstown | 19 | 83 | 41 | 9: March through November |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,750 to $7,550 for Ohio is attached.
Detailed vinyl fence report for Ohio, $9
Multi-page report for Ohio: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Ohio: your questions
+How much does it cost to install a vinyl fence in Ohio?
$4,350 to $8,950 for 150 linear ft, using statewide wages and prices. Metro areas inside Ohio can sit above or below that.
+Which city in Ohio is cheapest for vinyl fence?
Youngstown at about $6,500 (midpoint, 150 linear ft). The priciest is Columbus at $6,800.
+Is vinyl fence cheaper in Ohio than the US average?
It is 3% cheaper: $6,650 against $6,850 for 150 linear ft at the midpoint.
+What share of the price is labor in Ohio?
About 25% ($1,650). Materials are 74%. Statewide labor for this job is weighted 1.10x the national wage level.
+What do carpenters earn in Ohio?
The BLS statewide median is $29.24 an hour, against $29.12 for the US. The 25th to 75th percentile range is $23.42 to $36.47.
+Where does Ohio rank for vinyl fence costs?
27th most expensive of 51 (the 50 states plus DC) at the midpoint, $6,650 for 150 linear ft. Rank 1 is the costliest.
+What do basic and premium vinyl fence work cost in Ohio?
For 150 linear ft, basic work runs $4,350 to $6,200 and premium work $7,100 to $8,950. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Does the season matter for vinyl fence in Ohio?
Yes where winters or summers are hard. Of the Ohio metros we cover, Cincinnati has the most comfortable months (11 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add one gate" add in Ohio?
$150 to $790, from a national range scaled by the statewide wage and goods indexes.
Vinyl fence by city in Ohio
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.