Vinyl fence cost in Fayetteville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,550
- Per linear ft
- $28.50 – $56
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #216
- 1 = most expensive
Local price for a vinyl fence in the Fayetteville area: $4,300 to $8,550 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Carpenters earn a median of $22.50 an hour in the Fayetteville area, 23% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Fayetteville, NC, standard level
$5,600 to $7,300
About $37 to $48 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,000 | $1,550 |
| Permits and fees | $65 | $110 |
| Total | $5,600 | $7,300 |
Cost breakdown for 150 linear ft in Fayetteville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 79% |
| Labor | $640 | $1,300 | $1,900 | 20% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,300 | $6,450 | $8,550 | 100% |
What is behind the Fayetteville number
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $22.50 an hour. Add the other trades involved and the blended wage index for Fayetteville is 0.85 (US = 1.00), which puts labor at 20% of the total.
Materials are scaled with BEA's regional price parity for goods. Fayetteville is at 96.6 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.0: $35 to $140.
The best months for vinyl fence in Fayetteville
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Fayetteville Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Fayetteville are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Fayetteville gets about 45 inches of precipitation in a normal year. The wettest months are June, July and August (5.4 inches in August). Inside the workable window, February and December are the driest, at 2.8 and 3.0 inches. The station averages about 71 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 54 | 34 | 3.1 | Workable |
| Feb | 58 | 36 | 2.8 | Workable |
| Mar | 65 | 42 | 3.1 | Workable |
| Apr | 75 | 51 | 3.1 | Workable |
| May | 82 | 60 | 3.1 | Workable |
| Jun | 89 | 68 | 4.9 | Workable |
| Jul | 91 | 72 | 5.0 | Hot |
| Aug | 89 | 70 | 5.4 | Workable |
| Sep | 84 | 65 | 4.9 | Workable |
| Oct | 75 | 53 | 3.2 | Workable |
| Nov | 65 | 42 | 3.0 | Workable |
| Dec | 57 | 36 | 3.0 | Workable |
What nearby projects cost in Fayetteville
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Fayetteville wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−8%) and concrete slab lowest (−12%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,450 – $5,550 | −10% |
| Aluminum fence | 150 linear ft | $3,450 – $10,500 | −8% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
Who does the work: Fayetteville trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fayetteville the blend is 0.85.
Carpenters (47-2031), 50% of the weighting: a median of $22.50 an hour, 23% below the US median of $29.12. The middle half of them earn between $20.50 and $27.31 an hour. About 280 work in the metro. That is 21.3 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $21.03 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.31 and $23.41 an hour. BLS counts 600 of them working in the area, 45.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $50. That is a swing of roughly 0.8% to 1.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Fayetteville has 131,430 jobs in total (BLS, May 2025), ranking 166th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $20.50 | $22.50 | $27.31 | $29.12 | 0.77 | metro |
| Construction laborers (47-2061) | 50% | $17.31 | $21.03 | $23.41 | $22.66 | 0.93 | metro |
| Blended | 100% | 0.85 | |||||
Pick a size, pick a tier: vinyl fence pricing in Fayetteville
The cited range is split into basic, standard and premium bands, then scaled to Fayetteville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,600 to $7,300
6-ft privacy fence, standard white
Premium
$6,850 to $8,550
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,050 | $3,750 – $4,900 | $4,600 – $5,750 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,600 – $7,300 | $6,850 – $8,550 |
| 200 ft (200 linear ft) | $5,700 – $8,000 | $7,400 – $9,700 | $9,100 – $11,400 |
| full lot (300 linear ft) | $8,550 – $11,900 | $11,100 – $14,500 | $13,600 – $17,000 |
Why two Fayetteville quotes can differ
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Optional extras in Fayetteville
Add-ons start from national price ranges and are scaled by 0.91 for Fayetteville, which is the average of the area's wage index (0.85) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $710 |
| Remove old fence | $1,350 – $2,700 |
Is Fayetteville cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Durham is the priciest of the group at $6,550.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Fayetteville, NCthis page | $4,300 – $8,550 | $6,450 | |
| Raleigh, NC60 miles | $4,350 – $8,700 | $6,500 | +1% |
| Durham, NC65 miles | $4,350 – $8,750 | $6,550 | +2% |
| Burlington, NC75 miles | $4,300 – $8,600 | $6,450 | level |
| Wilmington, NC75 miles | $4,350 – $8,700 | $6,550 | +1% |
| Florence, SC75 miles | $4,300 – $8,650 | $6,450 | +1% |
| North Carolina (statewide) | $4,300 – $8,650 | $6,500 | +1% |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Out of the 300 metros we cover, Fayetteville ranks #216 for the cost of this job (#1 is the most expensive). Statewide, Fayetteville is 1% below the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $4,350 – $8,700 | $6,500 | +1% |
| Raleigh, NC | 743,120 jobs | $4,350 – $8,700 | $6,500 | +1% |
| Greensboro, NC | 365,410 jobs | $4,300 – $8,550 | $6,400 | level |
| Durham, NC | 344,020 jobs | $4,350 – $8,750 | $6,550 | +2% |
| Winston, NC | 271,980 jobs | $4,300 – $8,600 | $6,450 | level |
| Wilmington, NC | 191,280 jobs | $4,350 – $8,700 | $6,550 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Fayetteville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| South Bend, IN | 131,670 jobs | $4,350 – $8,850 | $6,600 | +3% |
| Olympia, WA | 130,300 jobs | $4,800 – $9,700 | $7,250 | +13% |
| College Station, TX | 134,040 jobs | $4,150 – $8,250 | $6,200 | −4% |
| Waco, TX | 129,860 jobs | $4,150 – $8,250 | $6,200 | −4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,300 for Fayetteville, NC is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Fayetteville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Fayetteville: your questions
+How much does it cost to install a vinyl fence in Fayetteville?
For 150 linear ft, expect $4,300 to $8,550 in the Fayetteville area. A standard-spec job lands at $5,600 to $7,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Fayetteville?
About $28.50 to $56 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Fayetteville or Raleigh?
Raleigh is 60 miles away. The midpoint for 150 linear ft there is $6,500, which is 1% more than Fayetteville ($6,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Fayetteville?
About 20% at the midpoint, or $1,300 out of $6,450. Materials are 79% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Fayetteville?
$5,700 to $11,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Fayetteville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Fayetteville area (our national range of $40 to $150 scaled by the local price level).
+Is Fayetteville expensive for vinyl fence compared with the rest of North Carolina?
Fayetteville is 1% below the North Carolina statewide estimate ($6,500 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Fayetteville?
The BLS median is $22.50 an hour in the Fayetteville area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.50 to $27.31.
+What do basic and premium vinyl fence work cost in Fayetteville?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,850 to $8,550. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Fayetteville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Fayetteville?
$140 to $710, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Fayetteville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.