Concrete slab cost in Fayetteville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (400 sq ft)
- $2,150 – $4,600
- Per sq ft
- $5.20 – $10.50
- before permit
- Versus US midpoint
- −12%
- US $3,850
- Rank of 300 metros
- #279
- 1 = most expensive
A concrete slab in Fayetteville, NC usually costs $2,150 to $4,600 for 400 sq ft. That works out to about $5.20 to $10.50 per sq ft before permits. Compared with the national midpoint that is $460 less. Cement masons and concrete finishers earn a median of $18.09 an hour in the Fayetteville area, 34% below the US median of $27.41.
Estimate your concrete slab cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 400 sq ft in Fayetteville, NC, standard level
$2,850 to $3,850
About $6.80 to $9 per sq ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,600 | $2,250 |
| Labor | $1,100 | $1,350 |
| Permits and fees | $140 | $270 |
| Total | $2,850 | $3,850 |
Cost breakdown for 400 sq ft in Fayetteville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,150 | $1,950 | $2,700 | 57% |
| Labor | $920 | $1,250 | $1,550 | 36% |
| Permits and fees | $45 | $210 | $370 | 6% |
| Total | $2,150 | $3,350 | $4,600 | 100% |
What is behind the Fayetteville number
We price the labor side from BLS wage data for 4 trades: cement masons and concrete finishers at 50%, construction laborers at 30%, operating engineers and other construction equipment operators at 10%, carpenters at 10%. Weighted together, Fayetteville wages are 0.77 times the national level. Labor makes up about 36% of the midpoint estimate (42% at national prices).
Materials are scaled with BEA's regional price parity for goods. Fayetteville is at 96.6 against 100 for the US, so a materials line of $2,000 nationally becomes $1,950 here (midpoint, 400 sq ft). Permits follow the all-items index of 92.0: $45 to $370.
How Fayetteville compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $3,350 to $3,550 across Fayetteville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Fayetteville, NCthis page | $2,150 – $4,600 | $3,350 | |
| Raleigh, NC60 miles | $2,250 – $4,850 | $3,550 | +6% |
| Durham, NC65 miles | $2,250 – $4,800 | $3,500 | +5% |
| Burlington, NC75 miles | $2,200 – $4,750 | $3,500 | +3% |
| Wilmington, NC75 miles | $2,200 – $4,800 | $3,500 | +4% |
| Florence, SC75 miles | $2,250 – $4,750 | $3,500 | +4% |
| North Carolina (statewide) | $2,250 – $4,800 | $3,500 | +5% |
| United States | $2,450 – $5,200 | $3,850 | +14% |
Out of the 300 metros we cover, Fayetteville ranks #279 for the cost of this job (#1 is the most expensive). Statewide, Fayetteville is 4% below the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $2,250 – $4,850 | $3,550 | +6% |
| Raleigh, NC | 743,120 jobs | $2,250 – $4,850 | $3,550 | +6% |
| Greensboro, NC | 365,410 jobs | $2,200 – $4,700 | $3,450 | +3% |
| Durham, NC | 344,020 jobs | $2,250 – $4,800 | $3,500 | +5% |
| Winston, NC | 271,980 jobs | $2,200 – $4,700 | $3,450 | +3% |
| Wilmington, NC | 191,280 jobs | $2,200 – $4,800 | $3,500 | +4% |
Metros of a similar size
Big cities and small ones price differently, so here is Fayetteville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| South Bend, IN | 131,670 jobs | $2,500 – $5,150 | $3,800 | +14% |
| Olympia, WA | 130,300 jobs | $2,850 – $5,900 | $4,400 | +30% |
| College Station, TX | 134,040 jobs | $2,100 – $4,550 | $3,300 | −1% |
| Waco, TX | 129,860 jobs | $2,100 – $4,550 | $3,350 | −1% |
Fayetteville weather and the concrete slab calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Fayetteville Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For pouring concrete, the comfortable months in Fayetteville are March through June and August through November: 8 of 12. Outside them, January, February and December have an average overnight low of 40°F or below, and July has an average daytime high of 90°F or more.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Heat matters for concrete as well. With average highs of 90°F or more in July, crews often start early, wet the base and plan for faster set times.
Fayetteville gets about 45 inches of precipitation in a normal year. The wettest months are June, July and August (5.4 inches in August). Inside the workable window, March and November are the driest, at 3.1 and 3.0 inches. The station averages about 71 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 54 | 34 | 3.1 | Cold |
| Feb | 58 | 36 | 2.8 | Cold |
| Mar | 65 | 42 | 3.1 | Workable |
| Apr | 75 | 51 | 3.1 | Workable |
| May | 82 | 60 | 3.1 | Workable |
| Jun | 89 | 68 | 4.9 | Workable |
| Jul | 91 | 72 | 5.0 | Hot |
| Aug | 89 | 70 | 5.4 | Workable |
| Sep | 84 | 65 | 4.9 | Workable |
| Oct | 75 | 53 | 3.2 | Workable |
| Nov | 65 | 42 | 3.0 | Workable |
| Dec | 57 | 36 | 3.0 | Cold |
Pick a size, pick a tier: concrete slab pricing in Fayetteville
The cited range is split into basic, standard and premium bands, then scaled to Fayetteville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x10 pad (100 sq ft) to 30x40 foundation (1,200 sq ft).
Basic
$2,150 to $3,100
4-inch broom-finish slab, light mesh, easy truck access
Standard
$2,850 to $3,850
4-5 inch slab with rebar or heavier mesh and standard base prep
Premium
$3,600 to $4,600
6-inch slab, heavy reinforcement, thick base, pump truck or tight access
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x10 pad (100 sq ft) | $570 – $910 | $820 – $1,150 | $1,100 – $1,450 |
| 12x12 (144 sq ft) | $790 – $1,250 | $1,100 – $1,550 | $1,450 – $1,900 |
| 20x20 (400 sq ft) | $2,150 – $3,100 | $2,850 – $3,850 | $3,600 – $4,600 |
| 24x24 garage floor (576 sq ft) | $3,050 – $4,400 | $4,050 – $5,450 | $5,100 – $6,450 |
| 30x40 foundation (1,200 sq ft) | $6,300 – $9,000 | $8,300 – $11,000 | $10,400 – $13,100 |
Related projects, priced for Fayetteville
Jobs that often go together with concrete slab are priced below at their usual sizes, using the same Fayetteville wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (−7%) and concrete driveway lowest (−17%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,100 – $7,550 | −17% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
| Detached garage | 576 sq ft | $25,700 – $51,700 | −11% |
| Stamped concrete | 400 sq ft | $2,850 – $6,800 | −14% |
| Asphalt driveway | 600 sq ft | $2,850 – $6,850 | −7% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,350 | −8% |
Optional extras in Fayetteville
Add-ons start from national price ranges and are scaled by 0.87 for Fayetteville, which is the average of the area's wage index (0.77) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $350 – $1,050 |
| Remove old concrete first | $690 – $2,100 |
Why two Fayetteville quotes can differ
Truck and pump access
If the mixer truck can't back up to the forms, someone has to wheelbarrow it in or hire a pump. Pump or line-pump hire is typically billed per day.
Small-job minimums
Many crews have a minimum charge, so a 10x10 pad can cost more per square foot than a 20x20 slab.
Finish
A broom finish is the baseline. Stamped, stained, or exposed-aggregate finishes are priced as add-ons on top of the slab.
What local crews earn in Fayetteville
The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fayetteville the blend is 0.77.
Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $18.09 an hour, 34% below the US median of $27.41. The middle half of them earn between $18.09 and $22.32 an hour. About 100 work in the metro. That is 7.6 per 10,000 jobs, compared with 13.3 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $21.03 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.31 and $23.41 an hour. BLS counts 600 of them working in the area, 45.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $23.26 an hour, 19% below the US median of $28.78. The middle half of them earn between $21.99 and $28.47 an hour. About 440 work in the metro. That is 33.5 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
Carpenters (47-2031), 10% of the weighting: a median of $22.50 an hour, 23% below the US median of $29.12. The middle half of them earn between $20.50 and $27.31 an hour. About 280 work in the metro. That is 21.3 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $0. That is a swing of roughly 0.0% to 3.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Fayetteville has 131,430 jobs in total (BLS, May 2025), ranking 166th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $18.09 | $18.09 | $22.32 | $27.41 | 0.66 | metro |
| Construction laborers (47-2061) | 30% | $17.31 | $21.03 | $23.41 | $22.66 | 0.93 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $21.99 | $23.26 | $28.47 | $28.78 | 0.81 | metro |
| Carpenters (47-2031) | 10% | $20.50 | $22.50 | $27.31 | $29.12 | 0.77 | metro |
| Blended | 100% | 0.77 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,850 to $3,850 for Fayetteville, NC is attached.
Take this estimate with you: PDF report, $9
The report lays out the concrete slab numbers for Fayetteville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete slab in Fayetteville: your questions
+How much does it cost to pour a concrete slab in Fayetteville?
For 400 sq ft, expect $2,150 to $4,600 in the Fayetteville area. A standard-spec job lands at $2,850 to $3,850. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete slab in Fayetteville?
About $5.20 to $10.50 per sq ft for materials and labor, plus $45 to $370 for the permit if one is needed. The US range is $6 to $12.
+Is concrete slab cheaper in Fayetteville or Raleigh?
Raleigh is 60 miles away. The midpoint for 400 sq ft there is $3,550, which is 6% more than Fayetteville ($3,350). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Fayetteville?
About 36% at the midpoint, or $1,250 out of $3,350. Materials are 57% and permits 6%. Nationally, labor is 42%.
+What would 20x20 (400 sq ft) cost in Fayetteville?
$2,150 to $4,600. Pick a different size in the estimator above to get your own number.
+Does concrete slab need a permit in Fayetteville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $370 for fees in the Fayetteville area (our national range of $50 to $400 scaled by the local price level).
+Is Fayetteville expensive for concrete slab compared with the rest of North Carolina?
Fayetteville is 4% below the North Carolina statewide estimate ($3,500 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do cement masons and concrete finishers earn in Fayetteville?
The BLS median is $18.09 an hour in the Fayetteville area, compared with $27.41 nationally. The 25th to 75th percentile range is $18.09 to $22.32.
+What do basic and premium concrete slab work cost in Fayetteville?
For 400 sq ft, basic work runs $2,150 to $3,100 and premium work $3,600 to $4,600. Basic means: 4-inch broom-finish slab, light mesh, easy truck access. Premium means: 6-inch slab, heavy reinforcement, thick base, pump truck or tight access.
+When is the best time to pour a concrete slab in Fayetteville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through June and August through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add rebar reinforcement" add in Fayetteville?
$350 to $1,050 for 400 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete slab near Fayetteville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Slab Cost? (2026) (accessed November 4, 2026)
- Estimators.us: Concrete Slab Cost in 2026 | $6-$12/Sq Ft Guide (accessed November 4, 2026)
- HomeGuide: How Much Does a Concrete Patio Cost? (2026) (accessed November 4, 2026)
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020