Tile flooring cost in Santa Fe, NM
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $1,800 – $8,800
- Per sq ft
- $8.90 – $44
- before permit
- Versus US midpoint
- −14%
- US $6,200
- Rank of 300 metros
- #294
- 1 = most expensive
A tile floor in Santa Fe, NM usually costs $1,800 to $8,800 for 200 sq ft. That works out to about $8.90 to $44 per sq ft before permits. Compared with the national midpoint that is $900 less. Tile and stone setters earn a median of $17.76 an hour in the Santa Fe area, 34% below the US median of $26.77.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Santa Fe, NM, standard level
$3,900 to $6,700
About $19.50 to $33.50 per sq ft before permits. Labor is about 33% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,300 | $4,850 |
| Labor | $1,600 | $1,900 |
| Permits and fees | $0 | $0 |
| Total | $3,900 | $6,700 |
Cost breakdown for 200 sq ft in Santa Fe, NM
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $380 | $3,550 | $6,750 | 67% |
| Labor | $1,400 | $1,750 | $2,100 | 33% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $1,800 | $5,300 | $8,800 | 100% |
Why Santa Fe prices look the way they do
Labor is 33% of the midpoint bill here, against 40% nationally. The mix of trades behind this job is tile and stone setters (85%), construction laborers (15%). We weight each trade's local median wage by that share and compare it with the national median. In Santa Fe the blended ratio comes out at 0.70.
Materials are scaled with BEA's regional price parity for goods. Santa Fe is at 96.1 against 100 for the US, so a materials line of $3,700 nationally becomes $3,550 here (midpoint, 200 sq ft). Permits follow the all-items index of 98.8: $0 to $0.
Related projects, priced for Santa Fe
Jobs that often go together with tile floor are priced below at their usual sizes, using the same Santa Fe wage and price inputs. Compared with national midpoints, hardwood flooring comes out highest (−4%) and shower pan lowest (−17%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $5,250 – $12,000 | −4% |
| Laminate flooring | 500 sq ft | $1,850 – $6,550 | −6% |
| Bathroom remodel | 45 sq ft | $4,200 – $20,900 | −10% |
| Shower pan | 1 pan | $720 – $2,400 | −17% |
Santa Fe: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Santa Fe. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from bathroom (50 sq ft) to main floor (400 sq ft).
Basic
$1,800 to $4,600
Basic ceramic or vinyl tile, simple square layout
Standard
$3,900 to $6,700
Porcelain tile, standard layout
Premium
$6,000 to $8,800
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $440 – $1,150 | $970 – $1,700 | $1,500 – $2,200 |
| kitchen (150 sq ft) | $1,350 – $3,450 | $2,900 – $5,050 | $4,500 – $6,600 |
| main floor (400 sq ft) | $3,550 – $9,200 | $7,800 – $13,400 | $12,000 – $17,600 |
Is Santa Fe cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Santa Fe. Las Cruces is the lowest at about $5,200 (midpoint, 200 sq ft), 225 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Fe, NMthis page | $1,800 – $8,800 | $5,300 | |
| Albuquerque, NM40 miles | $2,050 – $9,200 | $5,650 | +6% |
| Pueblo, CO200 miles | $2,450 – $9,800 | $6,100 | +15% |
| Las Cruces, NM225 miles | $1,700 – $8,700 | $5,200 | −2% |
| Amarillo, TX230 miles | $2,050 – $9,100 | $5,550 | +5% |
| Colorado Springs, CO240 miles | $2,250 – $9,550 | $5,900 | +12% |
| New Mexico (statewide) | $2,000 – $9,150 | $5,550 | +5% |
| United States | $2,400 – $10,000 | $6,200 | +17% |
Out of the 300 metros we cover, Santa Fe ranks #294 for the cost of this job (#1 is the most expensive). Statewide, Santa Fe is 5% below the New Mexico figure.
Elsewhere in New Mexico
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $2,050 – $9,200 | $5,650 | +6% |
| Las Cruces, NM | 80,000 jobs | $1,700 – $8,700 | $5,200 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Santa Fe against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Pueblo, CO | 61,780 jobs | $2,450 – $9,800 | $6,100 | +15% |
| Decatur, AL | 61,240 jobs | $2,000 – $9,150 | $5,600 | +5% |
| Hattiesburg, MS | 62,230 jobs | $1,800 – $8,850 | $5,350 | +1% |
| Dothan, AL | 60,720 jobs | $1,950 – $9,100 | $5,550 | +4% |
What local crews earn in Santa Fe
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Santa Fe the blend is 0.70.
Tile and stone setters (47-2044), 85% of the weighting: a median of $17.76 an hour, 34% below the US median of $26.77. The middle half of them earn between $17.76 and $24.10 an hour.
For construction laborers (47-2061, weighted 15%) the local median is $20.18 an hour, which is 11% below the national $22.66. The middle half of them earn between $17.99 and $22.67 an hour. BLS counts 530 of them working in the area, 85.8 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (tile and stone setters) from the median to the 75th percentile wage adds about $500 to the midpoint estimate; the 25th percentile takes off about $0. That is a swing of roughly 0.0% to 9.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Santa Fe has 61,770 jobs in total (BLS, May 2025), ranking 282nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $17.76 | $17.76 | $24.10 | $26.77 | 0.66 | metro |
| Construction laborers (47-2061) | 15% | $17.99 | $20.18 | $22.67 | $22.66 | 0.89 | metro |
| Blended | 100% | 0.70 | |||||
Tile flooring: what moves the price in Santa Fe
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Labor
Labor starts around $5 per sq ft for the simplest jobs and tops $20 for patterns or premium tile.
Tile alone
Tile costs $2-$35 per sq ft before installation, which is what makes the range so wide.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,900 to $6,700 for Santa Fe, NM is attached.
A detailed PDF report of this estimate, $9
The report lays out the tile flooring numbers for Santa Fe, NM line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Santa Fe: your questions
+How much does it cost to install a tile floor in Santa Fe?
For 200 sq ft, expect $1,800 to $8,800 in the Santa Fe area. A standard-spec job lands at $3,900 to $6,700. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Santa Fe?
About $8.90 to $44 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Santa Fe or Albuquerque?
Albuquerque is 40 miles away. The midpoint for 200 sq ft there is $5,650, which is 6% more than Santa Fe ($5,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Fe?
About 33% at the midpoint, or $1,750 out of $5,300. Materials are 67% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Santa Fe?
$1,350 to $6,600. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Santa Fe?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Santa Fe area (our national range of $0 to $0 scaled by the local price level).
+Is Santa Fe expensive for tile floor compared with the rest of New Mexico?
Santa Fe is 5% below the New Mexico statewide estimate ($5,550 at the midpoint). We cover 3 metros in New Mexico; see the state page to compare them.
+What do tile and stone setters earn in Santa Fe?
The BLS median is $17.76 an hour in the Santa Fe area, compared with $26.77 nationally. The 25th to 75th percentile range is $17.76 to $24.10.
+What do basic and premium tile floor work cost in Santa Fe?
For 200 sq ft, basic work runs $1,800 to $4,600 and premium work $6,000 to $8,800. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Santa Fe
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.