Tile flooring cost in New Mexico
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (200 sq ft)
- $2,000 – $9,150
- Per sq ft
- $9.95 – $45.50
- before permit
- Versus US midpoint
- −10%
- US $6,200
- Metros covered
- 3
What does it cost to install a tile floor in New Mexico? Plan on $2,000 to $9,150 for 200 sq ft. Wages (0.80x the US blend), materials (price index 96.1) and permit costs (92.2) put the state below the national midpoint by 10%.
Inside New Mexico, the metros we cover range from $5,200 (Las Cruces) to $5,650 (Albuquerque) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in New Mexico (statewide), standard level
$4,150 to $7,000
About $20.50 to $35 per sq ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,300 | $4,850 |
| Labor | $1,850 | $2,150 |
| Permits and fees | $0 | $0 |
| Total | $4,150 | $7,000 |
Cost breakdown for 200 sq ft in New Mexico
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $380 | $3,550 | $6,750 | 64% |
| Labor | $1,600 | $2,000 | $2,400 | 36% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,000 | $5,550 | $9,150 | 100% |
Tile flooring cost by metro in New Mexico
1 of the 3 metros sit above the statewide midpoint of $5,550, and the top-to-bottom gap is 8%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (200 sq ft) | Midpoint | vs. state |
|---|---|---|---|
| Albuquerque, NM | $2,050 – $9,200 | $5,650 | +1% |
| Santa Fe, NM | $1,800 – $8,800 | $5,300 | −5% |
| Las Cruces, NM | $1,700 – $8,700 | $5,200 | −6% |
If you are planning more than one job in New Mexico
The table prices neighboring jobs at their usual sizes using statewide New Mexico wages and prices. Against national midpoints, hardwood flooring comes out highest (−4%) and shower pan lowest (−9%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $5,250 – $12,000 | −4% |
| Laminate flooring | 500 sq ft | $1,850 – $6,600 | −6% |
| Bathroom remodel | 45 sq ft | $4,400 – $21,800 | −6% |
| Shower pan | 1 pan | $830 – $2,550 | −9% |
New Mexico against its neighbors
New Mexico ranks 46 of 51 (the 50 states plus DC) for tile floor, where 1 is the most expensive. The costliest is Hawaii at $7,750 and the cheapest Arkansas at $5,250, both for 200 sq ft at the midpoint. New Mexico sits at $5,550. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Colorado | 340 miles away | $2,450 – $10,000 | $6,250 | +12% |
| Arizona | 340 miles away | $2,250 – $9,500 | $5,900 | +6% |
| Wyoming | 460 miles away | $2,350 – $9,650 | $6,000 | +8% |
| Utah | 520 miles away | $2,200 – $9,450 | $5,800 | +5% |
| Oklahoma | 540 miles away | $2,000 – $8,950 | $5,500 | −2% |
Quality levels and sizes in New Mexico
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide New Mexico wages and prices. The grid prices the same bands at 3 common sizes.
Basic
$2,000 to $4,850
Basic ceramic or vinyl tile, simple square layout
Standard
$4,150 to $7,000
Porcelain tile, standard layout
Premium
$6,300 to $9,150
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $500 – $1,200 | $1,050 – $1,750 | $1,550 – $2,300 |
| kitchen (150 sq ft) | $1,500 – $3,650 | $3,100 – $5,250 | $4,700 – $6,850 |
| main floor (400 sq ft) | $4,000 – $9,700 | $8,250 – $14,000 | $12,600 – $18,300 |
Tile flooring: what moves the price in New Mexico
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Labor
Labor starts around $5 per sq ft for the simplest jobs and tops $20 for patterns or premium tile.
Tile alone
Tile costs $2-$35 per sq ft before installation, which is what makes the range so wide.
Subfloor
Uneven or damaged subfloors need prep work before the tile goes down.
What tile and stone setters and the other trades earn in New Mexico
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 2 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.80 for New Mexico.
For tile and stone setters (47-2044, weighted 85%) the local median is $21.42 an hour, which is 20% below the national $26.77. The middle half of them earn between $16.86 and $23.34 an hour. BLS counts 280 of them working in the state, 3.2 for every 10,000 jobs (US: 2.3), so the local bench is deeper than average.
Construction laborers (47-2061), 15% of the weighting: a median of $18.46 an hour, 19% below the US median of $22.66. The middle half of them earn between $17.07 and $22.26 an hour. About 12,470 work in the state. That is 143.2 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
A crew paid at the 75th percentile for tile and stone setters ($23.34 an hour) would add about $150 to the statewide midpoint; one at the 25th percentile ($16.86) would take off about $360. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 870,970 jobs across New Mexico (May 2025), which is 0.6% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $16.86 | $21.42 | $23.34 | $26.77 | 0.80 | state |
| Construction laborers (47-2061) | 15% | $17.07 | $18.46 | $22.26 | $22.66 | 0.81 | state |
| Blended | 100% | 0.80 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,150 to $7,000 for New Mexico is attached.
Detailed tile flooring report for New Mexico, $9
Multi-page report for New Mexico: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in New Mexico: your questions
+How much does it cost to install a tile floor in New Mexico?
$2,000 to $9,150 for 200 sq ft, using statewide wages and prices. Metro areas inside New Mexico can sit above or below that.
+Which city in New Mexico is cheapest for tile floor?
Las Cruces at about $5,200 (midpoint, 200 sq ft). The priciest is Albuquerque at $5,650.
+Is tile floor cheaper in New Mexico than the US average?
It is 10% cheaper: $5,550 against $6,200 for 200 sq ft at the midpoint.
+What share of the price is labor in New Mexico?
About 36% ($2,000). Materials are 64%. Statewide labor for this job is weighted 0.80x the national wage level.
+What do tile and stone setters earn in New Mexico?
The BLS statewide median is $21.42 an hour, against $26.77 for the US. The 25th to 75th percentile range is $16.86 to $23.34.
+Where does New Mexico rank for tile floor costs?
46th most expensive of 51 (the 50 states plus DC) at the midpoint, $5,550 for 200 sq ft. Rank 1 is the costliest.
+What do basic and premium tile floor work cost in New Mexico?
For 200 sq ft, basic work runs $2,000 to $4,850 and premium work $6,300 to $9,150. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring by city in New Mexico
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.