Hardwood flooring cost in Santa Fe, NM
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $5,250 – $12,000
- Per sq ft
- $10.50 – $24
- before permit
- Versus US midpoint
- −4%
- US $9,000
- Rank of 300 metros
- #124
- 1 = most expensive
A hardwood floor in Santa Fe, NM usually costs $5,250 to $12,000 for 500 sq ft. That works out to about $10.50 to $24 per sq ft before permits. Compared with the national midpoint that is $390 less. Building materials run about 4% below the US average here (BEA goods price index 96.1).
Estimate your hardwood flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Santa Fe, NM, standard level
$7,250 to $9,950
About $14.50 to $20 per sq ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,200 | $5,900 |
| Labor | $3,100 | $4,050 |
| Permits and fees | $0 | $0 |
| Total | $7,250 | $9,950 |
Cost breakdown for 500 sq ft in Santa Fe, NM
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,900 | $5,050 | $7,200 | 59% |
| Labor | $2,400 | $3,550 | $4,750 | 41% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $5,250 | $8,600 | $12,000 | 100% |
What is behind the Santa Fe number
Labor is 41% of the midpoint bill here, against 42% nationally. The mix of trades behind this job is carpenters (70%), floor layers (except carpet, wood and hard tiles) (30%). We weight each trade's local median wage by that share and compare it with the national median. In Santa Fe the blended ratio comes out at 0.95.
Materials are scaled with BEA's regional price parity for goods. Santa Fe is at 96.1 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 500 sq ft). Permits follow the all-items index of 98.8: $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Santa Fe. The wage table below marks each row.
Is Santa Fe cheap or dear? The local comparison
Of the five closest metros, 4 are cheaper than Santa Fe. Amarillo is the lowest at about $7,850 (midpoint, 500 sq ft), 230 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Fe, NMthis page | $5,250 – $12,000 | $8,600 | |
| Albuquerque, NM40 miles | $5,350 – $12,100 | $8,750 | +1% |
| Pueblo, CO200 miles | $5,100 – $11,700 | $8,400 | −3% |
| Las Cruces, NM225 miles | $5,200 – $11,800 | $8,500 | −1% |
| Amarillo, TX230 miles | $4,750 – $10,900 | $7,850 | −9% |
| Colorado Springs, CO240 miles | $5,150 – $11,700 | $8,450 | −2% |
| New Mexico (statewide) | $5,250 – $12,000 | $8,650 | level |
| United States | $5,500 – $12,500 | $9,000 | +4% |
Out of the 300 metros we cover, Santa Fe ranks #124 for the cost of this job (#1 is the most expensive). Statewide, Santa Fe is 0% below the New Mexico figure.
Elsewhere in New Mexico
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $5,350 – $12,100 | $8,750 | +1% |
| Las Cruces, NM | 80,000 jobs | $5,200 – $11,800 | $8,500 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Santa Fe against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Pueblo, CO | 61,780 jobs | $5,100 – $11,700 | $8,400 | −3% |
| Decatur, AL | 61,240 jobs | $4,900 – $11,200 | $8,050 | −7% |
| Hattiesburg, MS | 62,230 jobs | $4,950 – $11,300 | $8,150 | −6% |
| Dothan, AL | 60,720 jobs | $4,650 – $10,700 | $7,700 | −11% |
What local crews earn in Santa Fe
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Santa Fe the blend is 0.95.
Carpenters (47-2031), 70% of the weighting: a median of $28.57 an hour, in line with the US median of $29.12. The middle half of them earn between $23.73 and $29.66 an hour. About 210 work in the metro. That is 34.0 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 30% of the labor weighting. BLS does not publish this trade for the Santa Fe metro, so we used the New Mexico statewide median: $23.94 an hour against $27.15 for the US. The middle half of them earn between $18.80 and $33.59 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $100 to the midpoint estimate; the 25th percentile takes off about $440. That is a swing of roughly 5.1% to 1.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Santa Fe has 61,770 jobs in total (BLS, May 2025), ranking 282nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 70% | $23.73 | $28.57 | $29.66 | $29.12 | 0.98 | metro |
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 30% | $18.80 | $23.94 | $33.59 | $27.15 | 0.88 | state |
| Blended | 100% | 0.95 | |||||
Hardwood flooring: what moves the price in Santa Fe
Solid versus engineered
Solid hardwood is $11-$25 per sq ft installed and engineered hardwood is $9-$20 (HomeGuide).
Materials and labor
Materials are $6-$15 per sq ft and installation labor adds $3-$10 per sq ft.
Layout
Room shape, stairs and installation method change the labor side.
Cost by quality level and size in Santa Fe
The cited range is split into basic, standard and premium bands, then scaled to Santa Fe. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$5,250 to $7,950
Standard solid oak, simple layout
Standard
$7,250 to $9,950
Wider planks or a better grade, some stairs
Premium
$9,300 to $12,000
Exotic species, herringbone or complex layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $2,100 – $3,200 | $2,900 – $4,000 | $3,700 – $4,800 |
| main floor (500 sq ft) | $5,250 – $7,950 | $7,250 – $9,950 | $9,300 – $12,000 |
| whole house (1,200 sq ft) | $12,600 – $19,100 | $17,500 – $23,900 | $22,300 – $28,700 |
Related projects, priced for Santa Fe
Jobs that often go together with hardwood floor are priced below at their usual sizes, using the same Santa Fe wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−5%) and tile flooring lowest (−14%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Laminate flooring | 500 sq ft | $1,850 – $6,550 | −6% |
| Tile flooring | 200 sq ft | $1,800 – $8,800 | −14% |
| Kitchen remodel | 120 sq ft | $17,600 – $30,000 | −5% |
| Bathroom remodel | 45 sq ft | $4,200 – $20,900 | −10% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,250 to $9,950 for Santa Fe, NM is attached.
A detailed PDF report of this estimate, $9
The report lays out the hardwood flooring numbers for Santa Fe, NM line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Hardwood flooring in Santa Fe: your questions
+How much does it cost to install hardwood flooring in Santa Fe?
For 500 sq ft, expect $5,250 to $12,000 in the Santa Fe area. A standard-spec job lands at $7,250 to $9,950. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for hardwood floor in Santa Fe?
About $10.50 to $24 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $11 to $25.
+Is hardwood floor cheaper in Santa Fe or Albuquerque?
Albuquerque is 40 miles away. The midpoint for 500 sq ft there is $8,750, which is 1% more than Santa Fe ($8,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Fe?
About 41% at the midpoint, or $3,550 out of $8,600. Materials are 59% and permits 0%. Nationally, labor is 42%.
+What would main floor (500 sq ft) cost in Santa Fe?
$5,250 to $12,000. Pick a different size in the estimator above to get your own number.
+Does hardwood floor need a permit in Santa Fe?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Santa Fe area (our national range of $0 to $0 scaled by the local price level).
+Is Santa Fe expensive for hardwood floor compared with the rest of New Mexico?
Santa Fe is 0% below the New Mexico statewide estimate ($8,650 at the midpoint). We cover 3 metros in New Mexico; see the state page to compare them.
+What do carpenters earn in Santa Fe?
The BLS median is $28.57 an hour in the Santa Fe area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.73 to $29.66.
+What do basic and premium hardwood floor work cost in Santa Fe?
For 500 sq ft, basic work runs $5,250 to $7,950 and premium work $9,300 to $12,000. Basic means: standard solid oak, simple layout. Premium means: exotic species, herringbone or complex layout.
Hardwood flooring near Santa Fe
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.