Sprinkler system cost in Longview, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (4,000 sq ft of lawn)
- $3,500 – $8,800
- Per sq ft of lawn
- $0.90 – $2.20
- before permit
- Versus US midpoint
- −12%
- US $7,000
- Rank of 300 metros
- #277
- 1 = most expensive
Local price for a sprinkler system in the Longview area: $3,500 to $8,800 for 4,000 sq ft of lawn. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 12% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $26.11 an hour in the Longview area, 15% below the US median of $30.67.
Estimate your sprinkler system cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 4,000 sq ft of lawn in Longview, TX, standard level
$5,100 to $7,200
About $1.25 to $1.80 per sq ft of lawn before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,600 | $3,700 |
| Labor | $2,500 | $3,500 |
| Permits and fees | $0 | $0 |
| Total | $5,100 | $7,200 |
Cost breakdown for 4,000 sq ft of lawn in Longview, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,800 | $3,150 | $4,500 | 51% |
| Labor | $1,700 | $3,000 | $4,250 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $3,500 | $6,150 | $8,800 | 100% |
Why Longview prices look the way they do
Labor is 49% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (40%), construction laborers (40%), operating engineers and other construction equipment operators (20%). We weight each trade's local median wage by that share and compare it with the national median. In Longview the blended ratio comes out at 0.82.
Materials are scaled with BEA's regional price parity for goods. Longview is at 93.8 against 100 for the US, so a materials line of $3,350 nationally becomes $3,150 here (midpoint, 4,000 sq ft of lawn). Permits follow the all-items index of 89.5: $0 to $0.
The best months for sprinkler system in Longview
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Longview #2 (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Longview are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Longview gets about 51 inches of precipitation in a normal year. The wettest months are March, April and December (5.3 inches in December). Inside the workable window, January and November are the driest, at 4.2 and 3.4 inches. The station averages about 112 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 36 | 4.2 | Workable |
| Feb | 62 | 40 | 4.3 | Workable |
| Mar | 71 | 47 | 5.0 | Workable |
| Apr | 78 | 54 | 5.0 | Workable |
| May | 85 | 63 | 4.7 | Workable |
| Jun | 92 | 71 | 4.0 | Hot |
| Jul | 95 | 74 | 3.3 | Hot |
| Aug | 96 | 74 | 2.9 | Hot |
| Sep | 90 | 67 | 3.9 | Hot |
| Oct | 80 | 56 | 4.5 | Workable |
| Nov | 68 | 45 | 3.4 | Workable |
| Dec | 60 | 38 | 5.3 | Workable |
Who does the work: Longview trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Longview the blend is 0.82.
Plumbers, pipefitters and steamfitters (47-2152), 40% of the weighting: a median of $26.11 an hour, 15% below the US median of $30.67. The middle half of them earn between $21.15 and $30.19 an hour. About 420 work in the metro. That is 35.6 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $18.19 an hour, which is 20% below the national $22.66. The middle half of them earn between $16.53 and $22.15 an hour. BLS counts 1,610 of them working in the area, 136.4 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Operating engineers and other construction equipment operators (47-2073), 20% of the weighting: a median of $23.09 an hour, 20% below the US median of $28.78. The middle half of them earn between $21.75 and $26.79 an hour. About 750 work in the metro. That is 63.5 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $190 to the midpoint estimate; the 25th percentile takes off about $240. That is a swing of roughly 3.8% to 3.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Longview has 118,060 jobs in total (BLS, May 2025), ranking 186th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 40% | $21.15 | $26.11 | $30.19 | $30.67 | 0.85 | metro |
| Construction laborers (47-2061) | 40% | $16.53 | $18.19 | $22.15 | $22.66 | 0.80 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 20% | $21.75 | $23.09 | $26.79 | $28.78 | 0.80 | metro |
| Blended | 100% | 0.82 | |||||
Related projects, priced for Longview
Jobs that often go together with sprinkler system are priced below at their usual sizes, using the same Longview wage and price inputs. Compared with national midpoints, sod installation comes out highest (−10%) and concrete patio lowest (−14%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Sod installation | 1,500 sq ft | $1,350 – $3,000 | −10% |
| French drain | 60 linear ft | $520 – $1,850 | −13% |
| Retaining wall | 200 sq ft of wall face | $6,250 – $12,200 | −10% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
| Inground pool | 450 sq ft | $31,800 – $99,400 | −12% |
Longview: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Longview. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small yard (2,000 sq ft of lawn) to average lawn (4,000 sq ft of lawn).
Basic
$3,500 to $5,600
Few zones, simple rectangular lawn
Standard
$5,100 to $7,200
Standard zoned in-ground system with controller
Premium
$6,650 to $8,800
Irregular yard, many zones, slopes or rock
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small yard (2,000 sq ft of lawn) | $1,750 – $2,800 | $2,550 – $3,600 | $3,350 – $4,400 |
| quarter acre (10,000 sq ft of lawn) | $8,800 – $14,000 | $12,700 – $18,000 | $16,700 – $21,900 |
| average lawn (4,000 sq ft of lawn) | $3,500 – $5,600 | $5,100 – $7,200 | $6,650 – $8,800 |
Specs and site conditions that change a Longview bid
Backflow and permits
Backflow preventers and plumbing permits are local rules; check with your water utility.
Zones
HomeGuide prices sprinklers at $600-$2,000 per zone; $3,000-$10,000 total for a quarter-acre lawn.
Above ground versus in-ground
An above-ground system is $0.50-$1.50 per sq ft; in-ground is $1.00-$2.50.
Is Longview cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 4,000 sq ft of lawn range from $5,950 to $6,850 across Longview and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Longview, TXthis page | $3,500 – $8,800 | $6,150 | |
| Tyler, TX35 miles | $3,450 – $8,600 | $6,000 | −2% |
| Shreveport, LA55 miles | $3,600 – $9,050 | $6,300 | +3% |
| Texarkana, TX75 miles | $3,400 – $8,500 | $5,950 | −3% |
| Dallas, TX135 miles | $3,900 – $9,750 | $6,850 | +11% |
| Alexandria, LA145 miles | $3,500 – $8,800 | $6,150 | level |
| Texas (statewide) | $3,750 – $9,350 | $6,550 | +6% |
| United States | $4,000 – $10,000 | $7,000 | +14% |
Out of the 300 metros we cover, Longview ranks #277 for the cost of this job (#1 is the most expensive). Statewide, Longview is 6% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $3,900 – $9,750 | $6,850 | +11% |
| Houston, TX | 3,289,720 jobs | $3,800 – $9,550 | $6,700 | +9% |
| Austin, TX | 1,293,690 jobs | $3,750 – $9,400 | $6,550 | +7% |
| San Antonio, TX | 1,126,880 jobs | $3,600 – $9,000 | $6,300 | +2% |
| El Paso, TX | 339,120 jobs | $3,450 – $8,600 | $6,050 | −2% |
| McAllen, TX | 296,700 jobs | $3,300 – $8,200 | $5,750 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Longview against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Utica, NY | 118,390 jobs | $4,150 – $10,400 | $7,300 | +19% |
| Columbus, GA | 116,380 jobs | $3,400 – $8,550 | $6,000 | −2% |
| Greeley, CO | 119,540 jobs | $3,850 – $9,650 | $6,750 | +10% |
| Topeka, KS | 115,750 jobs | $4,000 – $10,000 | $7,000 | +14% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,100 to $7,200 for Longview, TX is attached.
Take this estimate with you: PDF report, $9
The report lays out the sprinkler system numbers for Longview, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Sprinkler system in Longview: your questions
+How much does it cost to install a sprinkler system in Longview?
For 4,000 sq ft of lawn, expect $3,500 to $8,800 in the Longview area. A standard-spec job lands at $5,100 to $7,200. Small jobs usually cost more per sq ft of lawn and large ones less.
+What is the price per sq ft of lawn for sprinkler system in Longview?
About $0.90 to $2.20 per sq ft of lawn for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $2.50.
+Is sprinkler system cheaper in Longview or Tyler?
Tyler is 35 miles away. The midpoint for 4,000 sq ft of lawn there is $6,000, which is 2% less than Longview ($6,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Longview?
About 49% at the midpoint, or $3,000 out of $6,150. Materials are 51% and permits 0%. Nationally, labor is 52%.
+What would quarter acre (10,000 sq ft of lawn) cost in Longview?
$8,800 to $21,900. Pick a different size in the estimator above to get your own number.
+Does sprinkler system need a permit in Longview?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Longview area (our national range of $0 to $0 scaled by the local price level).
+Is Longview expensive for sprinkler system compared with the rest of Texas?
Longview is 6% below the Texas statewide estimate ($6,550 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Longview?
The BLS median is $26.11 an hour in the Longview area, compared with $30.67 nationally. The 25th to 75th percentile range is $21.15 to $30.19.
+What do basic and premium sprinkler system work cost in Longview?
For 4,000 sq ft of lawn, basic work runs $3,500 to $5,600 and premium work $6,650 to $8,800. Basic means: few zones, simple rectangular lawn. Premium means: irregular yard, many zones, slopes or rock.
+When is the best time to install a sprinkler system in Longview?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. January and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Sprinkler system near Longview
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Sprinkler System Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split. It is a category average rather than an irrigation figure.