Metal roof cost in Tallahassee, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $8,750 – $29,200
- Per sq ft of roof
- $4.30 – $14.50
- before permit
- Versus US midpoint
- −11%
- US $21,300
- Rank of 300 metros
- #237
- 1 = most expensive
A metal roof in Tallahassee, FL usually costs $8,750 to $29,200 for 2,000 sq ft of roof. That works out to about $4.30 to $14.50 per sq ft of roof before permits. Compared with the national midpoint that is $2,350 less. Roofers earn a median of $22.88 an hour in the Tallahassee area, 14% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Tallahassee, FL, standard level
$14,900 to $23,100
About $7.30 to $11.50 per sq ft of roof before permits. Labor is about 53% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $5,950 | $11,400 |
| Labor | $8,650 | $11,300 |
| Permits and fees | $240 | $370 |
| Total | $14,900 | $23,100 |
Cost breakdown for 2,000 sq ft of roof in Tallahassee, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $8,650 | $15,400 | 46% |
| Labor | $6,650 | $10,000 | $13,300 | 53% |
| Permits and fees | $140 | $310 | $470 | 2% |
| Total | $8,750 | $19,000 | $29,200 | 100% |
Why Tallahassee prices look the way they do
We price the labor side from BLS wage data for 3 trades: roofers at 70%, sheet metal workers at 20%, construction laborers at 10%. Weighted together, Tallahassee wages are 0.83 times the national level. Labor makes up about 53% of the midpoint estimate (56% at national prices). BLS does not publish this trade for the metro, so we used the Florida statewide median.
Materials are scaled with BEA's regional price parity for goods. Tallahassee is at 96.2 against 100 for the US, so a materials line of $9,000 nationally becomes $8,650 here (midpoint, 2,000 sq ft of roof). Permits follow the all-items index of 93.9: $140 to $470.
Data note: 70% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Tallahassee. The wage table below marks each row.
Tallahassee against nearby metros and the rest of Florida
Same job, same size (2,000 sq ft of roof), priced for the nearest metros. Crestview is the priciest of the group at $19,200. Dothan is the cheapest at $18,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tallahassee, FLthis page | $8,750 – $29,200 | $19,000 | |
| Panama City, FL80 miles | $8,650 – $29,100 | $18,900 | −1% |
| Albany, GA90 miles | $8,450 – $28,600 | $18,500 | −2% |
| Dothan, AL95 miles | $8,400 – $28,500 | $18,500 | −3% |
| Gainesville, FL115 miles | $8,650 – $29,000 | $18,800 | −1% |
| Crestview, FL125 miles | $8,900 – $29,500 | $19,200 | +1% |
| Florida (statewide) | $8,950 – $29,900 | $19,400 | +2% |
| United States | $10,200 – $32,500 | $21,300 | +12% |
Out of the 300 metros we cover, Tallahassee ranks #237 for the cost of this job (#1 is the most expensive). Statewide, Tallahassee is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $9,200 – $31,100 | $20,100 | +6% |
| Tampa, FL | 1,447,120 jobs | $8,850 – $29,400 | $19,100 | +1% |
| Orlando, FL | 1,411,730 jobs | $8,800 – $29,400 | $19,100 | +1% |
| Jacksonville, FL | 765,930 jobs | $8,900 – $29,500 | $19,200 | +1% |
| North Port, FL | 339,940 jobs | $9,050 – $29,900 | $19,500 | +3% |
| Cape Coral, FL | 304,790 jobs | $8,850 – $29,500 | $19,200 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Tallahassee against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Salinas, CA | 186,430 jobs | $11,700 – $36,200 | $24,000 | +26% |
| York, PA | 183,590 jobs | $9,950 – $32,200 | $21,100 | +11% |
| Salem, OR | 188,620 jobs | $10,100 – $33,000 | $21,500 | +14% |
| Lincoln, NE | 182,620 jobs | $8,950 – $29,400 | $19,200 | +1% |
Specs and site conditions that change a Tallahassee bid
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Related projects, priced for Tallahassee
Jobs that often go together with metal roof are priced below at their usual sizes, using the same Tallahassee wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−5%) and vinyl siding lowest (−13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,400 – $11,300 | −11% |
| Gutters | 160 linear ft | $1,150 – $3,800 | −10% |
| Attic insulation | 1,000 sq ft | $950 – $3,800 | −5% |
| Vinyl siding | 2,100 sq ft of wall | $7,350 – $22,000 | −13% |
What local crews earn in Tallahassee
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tallahassee the blend is 0.83.
Roofers (47-2181) carry 70% of the labor weighting. BLS does not publish this trade for the Tallahassee metro, so we used the Florida statewide median: $22.88 an hour against $26.65 for the US. The middle half of them earn between $18.29 and $27.72 an hour.
Sheet metal workers (47-2211), 20% of the weighting: a median of $22.39 an hour, 25% below the US median of $29.71. The middle half of them earn between $21.43 and $25.96 an hour. About 120 work in the metro. That is 6.4 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 10%) the local median is $18.61 an hour, which is 18% below the national $22.66. The middle half of them earn between $16.91 and $21.61 an hour. BLS counts 1,390 of them working in the area, 74.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (roofers) from the median to the 75th percentile wage adds about $1,550 to the midpoint estimate; the 25th percentile takes off about $1,450. That is a swing of roughly 7.6% to 8.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tallahassee has 186,160 jobs in total (BLS, May 2025), ranking 124th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $18.29 | $22.88 | $27.72 | $26.65 | 0.86 | state |
| Sheet metal workers (47-2211) | 20% | $21.43 | $22.39 | $25.96 | $29.71 | 0.75 | metro |
| Construction laborers (47-2061) | 10% | $16.91 | $18.61 | $21.61 | $22.66 | 0.82 | metro |
| Blended | 100% | 0.83 | |||||
Tallahassee: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Tallahassee. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small (1,200 sq ft of roof) to large (2,800 sq ft of roof).
Basic
$8,750 to $16,900
Corrugated or exposed-fastener steel panels
Standard
$14,900 to $23,100
Standing seam steel
Premium
$21,000 to $29,200
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,300 – $10,300 | $9,000 – $14,000 | $12,700 – $17,700 |
| average (2,000 sq ft of roof) | $8,750 – $16,900 | $14,900 – $23,100 | $21,000 – $29,200 |
| large (2,800 sq ft of roof) | $12,200 – $23,600 | $20,700 – $32,100 | $29,300 – $40,700 |
Tallahassee weather and the metal roof calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Tallahassee (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Tallahassee are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Tallahassee gets about 59 inches of precipitation in a normal year. The wettest months are June, July and August (7.8 inches in June). Inside the workable window, October and November are the driest, at 3.2 and 3.1 inches. The station averages about 103 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 64 | 41 | 4.4 | Workable |
| Feb | 68 | 44 | 4.3 | Workable |
| Mar | 74 | 49 | 5.2 | Workable |
| Apr | 80 | 54 | 3.5 | Workable |
| May | 87 | 63 | 3.4 | Workable |
| Jun | 91 | 71 | 7.8 | Hot |
| Jul | 92 | 73 | 7.1 | Hot |
| Aug | 92 | 73 | 7.6 | Hot |
| Sep | 89 | 70 | 4.9 | Workable |
| Oct | 82 | 59 | 3.2 | Workable |
| Nov | 73 | 48 | 3.1 | Workable |
| Dec | 66 | 43 | 4.2 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $14,900 to $23,100 for Tallahassee, FL is attached.
Take this estimate with you: PDF report, $9
The report lays out the metal roof numbers for Tallahassee, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Tallahassee: your questions
+How much does it cost to install a metal roof in Tallahassee?
For 2,000 sq ft of roof, expect $8,750 to $29,200 in the Tallahassee area. A standard-spec job lands at $14,900 to $23,100. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Tallahassee?
About $4.30 to $14.50 per sq ft of roof for materials and labor, plus $140 to $470 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Tallahassee or Panama City?
Panama City is 80 miles away. The midpoint for 2,000 sq ft of roof there is $18,900, which is 1% less than Tallahassee ($19,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tallahassee?
About 53% at the midpoint, or $10,000 out of $19,000. Materials are 46% and permits 2%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Tallahassee?
$8,750 to $29,200. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Tallahassee?
Often, but rules are set by your city or county building office, so call before you hire. Budget $140 to $470 for fees in the Tallahassee area (our national range of $150 to $500 scaled by the local price level).
+Is Tallahassee expensive for metal roof compared with the rest of Florida?
Tallahassee is 2% below the Florida statewide estimate ($19,400 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do roofers earn in Tallahassee?
BLS has no published metro figure here, so we use the statewide median of $22.88 an hour, compared with $26.65 nationally. The 25th to 75th percentile range is $18.29 to $27.72.
+What do basic and premium metal roof work cost in Tallahassee?
For 2,000 sq ft of roof, basic work runs $8,750 to $16,900 and premium work $21,000 to $29,200. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Tallahassee?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Tallahassee
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.