Kitchen cabinets cost in Rapid City, SD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (25 linear ft)
- $3,850 – $12,300
- Per linear ft
- $137 – $439
- before permit
- Versus US midpoint
- −11%
- US $9,150
- Rank of 300 metros
- #246
- 1 = most expensive
Local price for new kitchen cabinets in the Rapid City area: $3,850 to $12,300 for 25 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Carpenters earn a median of $23.39 an hour in the Rapid City area, 20% below the US median of $29.12.
Estimate your kitchen cabinets cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 25 linear ft in Rapid City, SD, standard level
$6,400 to $9,800
About $227 to $348 per linear ft before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,100 | $4,050 |
| Labor | $2,600 | $4,650 |
| Permits and fees | $710 | $1,050 |
| Total | $6,400 | $9,800 |
Cost breakdown for 25 linear ft in Rapid City, SD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,400 | $3,600 | $4,750 | 44% |
| Labor | $1,050 | $3,600 | $6,200 | 45% |
| Permits and fees | $450 | $890 | $1,350 | 11% |
| Total | $3,850 | $8,100 | $12,300 | 100% |
What is behind the Rapid City number
Labor is 45% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Rapid City the blended ratio comes out at 0.83.
Materials are scaled with BEA's regional price parity for goods. Rapid City is at 95.5 against 100 for the US, so a materials line of $3,750 nationally becomes $3,600 here (midpoint, 25 linear ft). Permits follow the all-items index of 89.2: $450 to $1,350.
Cost by quality level and size in Rapid City
The cited range is split into basic, standard and premium bands, then scaled to Rapid City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small galley (15 linear ft) to large kitchen (40 linear ft).
Basic
$3,850 to $7,250
Stock cabinets, same layout
Standard
$6,400 to $9,800
Semi-custom with upgraded finishes
Premium
$8,950 to $12,300
Custom cabinetry, new layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small galley (15 linear ft) | $2,500 – $4,650 | $4,150 – $6,300 | $5,750 – $7,900 |
| 10x10 kitchen (20 linear ft) | $3,200 – $5,950 | $5,250 – $8,050 | $7,350 – $10,100 |
| average kitchen (25 linear ft) | $3,850 – $7,250 | $6,400 – $9,800 | $8,950 – $12,300 |
| large kitchen (40 linear ft) | $5,900 – $11,100 | $9,800 – $15,000 | $13,700 – $18,900 |
Who does the work: Rapid City trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Rapid City the blend is 0.83.
Carpenters (47-2031), 80% of the weighting: a median of $23.39 an hour, 20% below the US median of $29.12. The middle half of them earn between $21.34 and $28.88 an hour. About 870 work in the metro. That is 117.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For electricians (47-2111, weighted 10%) the local median is $29.40 an hour, which is 3% below the national $30.38. The middle half of them earn between $23.44 and $31.45 an hour. BLS counts 460 of them working in the area, 62.3 for every 10,000 jobs (US: 48.7), so the local bench is deeper than average.
Plumbers, pipefitters and steamfitters (47-2152), 10% of the weighting: a median of $26.85 an hour, 12% below the US median of $30.67. The middle half of them earn between $21.82 and $29.47 an hour. About 360 work in the metro. That is 48.8 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $660 to the midpoint estimate; the 25th percentile takes off about $250. That is a swing of roughly 3.0% to 8.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Rapid City has 73,820 jobs in total (BLS, May 2025), ranking 249th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $21.34 | $23.39 | $28.88 | $29.12 | 0.80 | metro |
| Electricians (47-2111) | 10% | $23.44 | $29.40 | $31.45 | $30.38 | 0.97 | metro |
| Plumbers, pipefitters and steamfitters (47-2152) | 10% | $21.82 | $26.85 | $29.47 | $30.67 | 0.88 | metro |
| Blended | 100% | 0.83 | |||||
Why two Rapid City quotes can differ
Stock, semi-custom or custom
Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).
Layout changes
Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.
Removal
Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.
Related projects, priced for Rapid City
Jobs that often go together with kitchen cabinets are priced below at their usual sizes, using the same Rapid City wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−7%) and storm door lowest (−9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen remodel | 120 sq ft | $17,300 – $29,400 | −7% |
| Storm door | 1 door | $310 – $860 | −9% |
| Front door | 1 door | $440 – $2,300 | −8% |
| Bathroom remodel | 45 sq ft | $4,300 – $21,300 | −9% |
| Shower pan | 1 pan | $840 – $2,550 | −9% |
| Kitchen backsplash | 30 sq ft | $280 – $1,400 | −7% |
Is Rapid City cheap or dear? The local comparison
Of the five closest metros, none is cheaper than Rapid City. Sioux Falls comes closest at about $8,150.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rapid City, SDthis page | $3,850 – $12,300 | $8,100 | |
| Bismarck, ND210 miles | $4,000 – $13,100 | $8,550 | +6% |
| Cheyenne, WY220 miles | $4,050 – $13,400 | $8,700 | +8% |
| Greeley, CO260 miles | $4,100 – $13,500 | $8,800 | +9% |
| Fort Collins, CO275 miles | $4,100 – $13,500 | $8,800 | +9% |
| Sioux Falls, SD305 miles | $3,900 – $12,400 | $8,150 | +1% |
| South Dakota (statewide) | $3,850 – $12,200 | $8,050 | −1% |
| United States | $4,250 – $14,000 | $9,150 | +13% |
Out of the 300 metros we cover, Rapid City ranks #246 for the cost of this job (#1 is the most expensive). Statewide, Rapid City is 1% above the South Dakota figure.
Elsewhere in South Dakota
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Sioux Falls, SD | 178,590 jobs | $3,900 – $12,400 | $8,150 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Rapid City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Blacksburg, VA | 74,070 jobs | $3,900 – $12,300 | $8,100 | level |
| Kahului, HI | 73,750 jobs | $5,050 – $17,400 | $11,200 | +39% |
| Sioux City, IA | 75,010 jobs | $3,900 – $12,700 | $8,250 | +2% |
| Bloomington, IN | 73,240 jobs | $4,150 – $14,100 | $9,150 | +13% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,400 to $9,800 for Rapid City, SD is attached.
Detailed kitchen cabinets report for Rapid City, SD, $9
Multi-page report for Rapid City, SD: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen cabinets in Rapid City: your questions
+How much does it cost to replace kitchen cabinets in Rapid City?
For 25 linear ft, expect $3,850 to $12,300 in the Rapid City area. A standard-spec job lands at $6,400 to $9,800. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for kitchen cabinets in Rapid City?
About $137 to $439 per linear ft for materials and labor, plus $450 to $1,350 for the permit if one is needed. The US range is $150 to $500.
+Is kitchen cabinets cheaper in Rapid City or Bismarck?
Bismarck is 210 miles away. The midpoint for 25 linear ft there is $8,550, which is 6% more than Rapid City ($8,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rapid City?
About 45% at the midpoint, or $3,600 out of $8,100. Materials are 44% and permits 11%. Nationally, labor is 48%.
+What would average kitchen (25 linear ft) cost in Rapid City?
$3,850 to $12,300. Pick a different size in the estimator above to get your own number.
+Does kitchen cabinets need a permit in Rapid City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $450 to $1,350 for fees in the Rapid City area (our national range of $500 to $1,500 scaled by the local price level).
+Is Rapid City expensive for kitchen cabinets compared with the rest of South Dakota?
Rapid City is 1% above the South Dakota statewide estimate ($8,050 at the midpoint). We cover 2 metros in South Dakota; see the state page to compare them.
+What do carpenters earn in Rapid City?
The BLS median is $23.39 an hour in the Rapid City area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.34 to $28.88.
+What do basic and premium kitchen cabinets work cost in Rapid City?
For 25 linear ft, basic work runs $3,850 to $7,250 and premium work $8,950 to $12,300. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.
Kitchen cabinets near Rapid City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Do Kitchen Cabinets Cost? (2026 Prices) (accessed November 4, 2026)
- HomeGuide: How Much Does Cabinet Installation Cost? (New 2026 Prices) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.