Front door cost in Rapid City, SD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $440 – $2,300
- Per door
- $439 – $2,322
- before permit
- Versus US midpoint
- −8%
- US $1,500
- Rank of 300 metros
- #238
- 1 = most expensive
Local price for a new front door in the Rapid City area: $440 to $2,300 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% lower than the US figure. Carpenters earn a median of $23.39 an hour in the Rapid City area, 20% below the US median of $29.12.
Estimate your front door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Rapid City, SD, standard level
$1,000 to $1,750
About $1,004 to $1,757 per door before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $710 | $1,400 |
| Labor | $300 | $360 |
| Permits and fees | $0 | $0 |
| Total | $1,000 | $1,750 |
Cost breakdown for 1 door in Rapid City, SD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $190 | $1,050 | $1,900 | 76% |
| Labor | $250 | $330 | $410 | 24% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $440 | $1,400 | $2,300 | 100% |
Where the Rapid City price comes from
We price the labor side from BLS wage data for 2 trades: carpenters at 85%, general maintenance and repair workers at 15%. Weighted together, Rapid City wages are 0.83 times the national level. Labor makes up about 24% of the midpoint estimate (27% at national prices).
Materials are scaled with BEA's regional price parity for goods. Rapid City is at 95.5 against 100 for the US, so a materials line of $1,100 nationally becomes $1,050 here (midpoint, 1 door). Permits follow the all-items index of 89.2: $0 to $0.
Planning more than one job in Rapid City?
Jobs that often go together with front door are priced below at their usual sizes, using the same Rapid City wage and price inputs. Compared with national midpoints, garage door comes out highest (−7%) and patio door lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Storm door | 1 door | $310 – $860 | −9% |
| Patio door | 1 door | $550 – $5,350 | −11% |
| Window replacement | 10 windows | $4,100 – $13,800 | −8% |
| Garage door | 1 door | $640 – $3,450 | −7% |
Rapid City: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Rapid City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from single entry door to front and side doors.
Basic
$440 to $1,200
Basic steel door, same size opening
Standard
$1,000 to $1,750
Fiberglass door with sidelight trim or glass
Premium
$1,550 to $2,300
Wood or custom door, frame work needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single entry door | $440 – $1,200 | $1,000 – $1,750 | $1,550 – $2,300 |
| front and side doors | $880 – $2,400 | $2,000 – $3,500 | $3,150 – $4,650 |
Specs and site conditions that change a Rapid City bid
Door material
Basic steel doors run about $200-$600 for the door; fiberglass and wood go to $2,000 (HomeGuide).
Double doors
A double front door costs $1,500-$6,500+ installed; the doors alone are $1,200-$5,000.
Frame
Frame repair adds $75-$200+; rebuilding the opening for a new size costs $7-$20 per linear foot for framing.
How Rapid City compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 door range from $1,400 to $1,450 across Rapid City and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rapid City, SDthis page | $440 – $2,300 | $1,400 | |
| Bismarck, ND210 miles | $470 – $2,350 | $1,400 | +3% |
| Cheyenne, WY220 miles | $470 – $2,350 | $1,400 | +3% |
| Greeley, CO260 miles | $480 – $2,400 | $1,450 | +5% |
| Fort Collins, CO275 miles | $490 – $2,400 | $1,450 | +5% |
| Sioux Falls, SD305 miles | $440 – $2,350 | $1,400 | level |
| South Dakota (statewide) | $440 – $2,300 | $1,400 | level |
| United States | $500 – $2,500 | $1,500 | +9% |
Out of the 300 metros we cover, Rapid City ranks #238 for the cost of this job (#1 is the most expensive). Statewide, Rapid City is 0% above the South Dakota figure.
Elsewhere in South Dakota
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Sioux Falls, SD | 178,590 jobs | $440 – $2,350 | $1,400 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Rapid City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Blacksburg, VA | 74,070 jobs | $440 – $2,350 | $1,400 | +1% |
| Kahului, HI | 73,750 jobs | $630 – $2,900 | $1,750 | +28% |
| Sioux City, IA | 75,010 jobs | $460 – $2,350 | $1,400 | +1% |
| Bloomington, IN | 73,240 jobs | $490 – $2,400 | $1,450 | +4% |
Who does the work: Rapid City trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Rapid City the blend is 0.83.
Carpenters (47-2031), 85% of the weighting: a median of $23.39 an hour, 20% below the US median of $29.12. The middle half of them earn between $21.34 and $28.88 an hour. About 870 work in the metro. That is 117.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For general maintenance and repair workers (49-9071, weighted 15%) the local median is $22.65 an hour, which is 5% below the national $23.84. The middle half of them earn between $19.70 and $26.63 an hour. BLS counts 550 of them working in the area, 74.5 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $65 to the midpoint estimate; the 25th percentile takes off about $25. That is a swing of roughly 1.7% to 4.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Rapid City has 73,820 jobs in total (BLS, May 2025), ranking 249th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 85% | $21.34 | $23.39 | $28.88 | $29.12 | 0.80 | metro |
| General maintenance and repair workers (49-9071) | 15% | $19.70 | $22.65 | $26.63 | $23.84 | 0.95 | metro |
| Blended | 100% | 0.83 | |||||
The best months for front door in Rapid City
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Rapid City Wfo (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Rapid City are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Rapid City gets about 20 inches of precipitation in a normal year, including roughly 54 inches of snow. The wettest months are May, June and July (4.1 inches in May). Inside the workable window, March and November are the driest, at 0.9 and 0.5 inches. The station averages about 24 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 16 | 0.3 | Cold |
| Feb | 38 | 18 | 0.5 | Cold |
| Mar | 47 | 26 | 0.9 | Workable |
| Apr | 55 | 34 | 2.3 | Workable |
| May | 65 | 45 | 4.1 | Workable |
| Jun | 76 | 55 | 3.3 | Workable |
| Jul | 84 | 62 | 2.6 | Workable |
| Aug | 83 | 60 | 2.2 | Workable |
| Sep | 74 | 51 | 1.4 | Workable |
| Oct | 59 | 38 | 1.5 | Workable |
| Nov | 47 | 27 | 0.5 | Workable |
| Dec | 38 | 19 | 0.4 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,000 to $1,750 for Rapid City, SD is attached.
Detailed front door report for Rapid City, SD, $9
Multi-page report for Rapid City, SD: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Front door in Rapid City: your questions
+How much does it cost to replace a front door in Rapid City?
For 1 door, expect $440 to $2,300 in the Rapid City area. A standard-spec job lands at $1,000 to $1,750. Small jobs usually cost more per door and large ones less.
+What is the price per door for front door in Rapid City?
About $439 to $2,322 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $500 to $2,500.
+Is front door cheaper in Rapid City or Bismarck?
Bismarck is 210 miles away. The midpoint for 1 door there is $1,400, which is 3% more than Rapid City ($1,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rapid City?
About 24% at the midpoint, or $330 out of $1,400. Materials are 76% and permits 0%. Nationally, labor is 27%.
+What would front and side doors cost in Rapid City?
$880 to $4,650. Pick a different size in the estimator above to get your own number.
+Does front door need a permit in Rapid City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Rapid City area (our national range of $0 to $0 scaled by the local price level).
+Is Rapid City expensive for front door compared with the rest of South Dakota?
Rapid City is 0% above the South Dakota statewide estimate ($1,400 at the midpoint). We cover 2 metros in South Dakota; see the state page to compare them.
+What do carpenters earn in Rapid City?
The BLS median is $23.39 an hour in the Rapid City area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.34 to $28.88.
+What do basic and premium front door work cost in Rapid City?
For 1 door, basic work runs $440 to $1,200 and premium work $1,550 to $2,300. Basic means: basic steel door, same size opening. Premium means: wood or custom door, frame work needed.
+When is the best time to replace a front door in Rapid City?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Front door near Rapid City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Front Door Replacement Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's door prices, from about $200 for a basic steel door to $2,000 for higher-end fiberglass or wood.