Shower pan cost in Rapid City, SD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $840 – $2,550
- Per pan
- $812 – $2,112
- before permit
- Versus US midpoint
- −9%
- US $1,850
- Rank of 300 metros
- #207
- 1 = most expensive
A shower pan in Rapid City, SD usually costs $840 to $2,550 for 1 pan. That works out to about $812 to $2,112 per pan before permits. Compared with the national midpoint that is $170 less. Plumbers, pipefitters and steamfitters earn a median of $26.85 an hour in the Rapid City area, 12% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Rapid City, SD, standard level
$1,350 to $2,050
About $1,202 to $1,722 per pan before permits. Labor is about 55% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $680 |
| Labor | $830 | $1,050 |
| Permits and fees | $150 | $320 |
| Total | $1,350 | $2,050 |
Cost breakdown for 1 pan in Rapid City, SD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $530 | $910 | 31% |
| Labor | $670 | $940 | $1,200 | 55% |
| Permits and fees | $25 | $240 | $450 | 14% |
| Total | $840 | $1,700 | $2,550 | 100% |
Where the Rapid City price comes from
We price the labor side from BLS wage data for 2 trades: plumbers, pipefitters and steamfitters at 50%, tile and stone setters at 50%. Weighted together, Rapid City wages are 0.89 times the national level. Labor makes up about 55% of the midpoint estimate (56% at national prices).
Materials are scaled with BEA's regional price parity for goods. Rapid City is at 95.5 against 100 for the US, so a materials line of $550 nationally becomes $530 here (midpoint, 1 pan). Permits follow the all-items index of 89.2: $25 to $450.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Rapid City. The wage table below marks each row.
What nearby projects cost in Rapid City
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Rapid City wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−7%) and kitchen cabinets lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,300 – $21,300 | −9% |
| Kitchen cabinets | 25 linear ft | $3,850 – $12,300 | −11% |
| Window replacement | 10 windows | $4,100 – $13,800 | −8% |
| Kitchen remodel | 120 sq ft | $17,300 – $29,400 | −7% |
| Kitchen backsplash | 30 sq ft | $280 – $1,400 | −7% |
What local crews earn in Rapid City
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Rapid City the blend is 0.89.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $26.85 an hour, 12% below the US median of $30.67. The middle half of them earn between $21.82 and $29.47 an hour. About 360 work in the metro. That is 48.8 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Rapid City metro, so we used the South Dakota statewide median: $24.34 an hour against $26.77 for the US. The middle half of them earn between $23.34 and $32.61 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $45 to the midpoint estimate; the 25th percentile takes off about $85. That is a swing of roughly 5.1% to 2.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Rapid City has 73,820 jobs in total (BLS, May 2025), ranking 249th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $21.82 | $26.85 | $29.47 | $30.67 | 0.88 | metro |
| Tile and stone setters (47-2044) | 50% | $23.34 | $24.34 | $32.61 | $26.77 | 0.91 | state |
| Blended | 100% | 0.89 | |||||
Is Rapid City cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,700 to $1,850 across Rapid City and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rapid City, SDthis page | $840 – $2,550 | $1,700 | |
| Bismarck, ND210 miles | $870 – $2,650 | $1,750 | +3% |
| Cheyenne, WY220 miles | $910 – $2,700 | $1,800 | +7% |
| Greeley, CO260 miles | $910 – $2,750 | $1,850 | +8% |
| Fort Collins, CO275 miles | $920 – $2,750 | $1,850 | +8% |
| Sioux Falls, SD305 miles | $830 – $2,550 | $1,700 | level |
| South Dakota (statewide) | $810 – $2,500 | $1,650 | −2% |
| United States | $930 – $2,800 | $1,850 | +10% |
Out of the 300 metros we cover, Rapid City ranks #207 for the cost of this job (#1 is the most expensive). Statewide, Rapid City is 2% above the South Dakota figure.
Elsewhere in South Dakota
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Sioux Falls, SD | 178,590 jobs | $830 – $2,550 | $1,700 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Rapid City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Blacksburg, VA | 74,070 jobs | $820 – $2,550 | $1,700 | −1% |
| Kahului, HI | 73,750 jobs | $1,100 – $3,200 | $2,150 | +27% |
| Sioux City, IA | 75,010 jobs | $890 – $2,650 | $1,750 | +4% |
| Bloomington, IN | 73,240 jobs | $1,050 – $3,000 | $2,050 | +19% |
Why two Rapid City quotes can differ
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Rapid City: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Rapid City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$840 to $1,550
Pre-made acrylic or fiberglass pan
Standard
$1,350 to $2,050
Tile-ready pan with tile finish
Premium
$1,850 to $2,550
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $840 – $1,550 | $1,350 – $2,050 | $1,850 – $2,550 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,350 to $2,050 for Rapid City, SD is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Rapid City, SD: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Rapid City: your questions
+How much does it cost to install a shower pan in Rapid City?
For 1 pan, expect $840 to $2,550 in the Rapid City area. A standard-spec job lands at $1,350 to $2,050. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Rapid City?
About $812 to $2,112 per pan for materials and labor, plus $25 to $450 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Rapid City or Bismarck?
Bismarck is 210 miles away. The midpoint for 1 pan there is $1,750, which is 3% more than Rapid City ($1,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rapid City?
About 55% at the midpoint, or $940 out of $1,700. Materials are 31% and permits 14%. Nationally, labor is 56%.
+What would one shower pan cost in Rapid City?
$840 to $2,550. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Rapid City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $25 to $450 for fees in the Rapid City area (our national range of $30 to $500 scaled by the local price level).
+Is Rapid City expensive for shower pan compared with the rest of South Dakota?
Rapid City is 2% above the South Dakota statewide estimate ($1,650 at the midpoint). We cover 2 metros in South Dakota; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Rapid City?
The BLS median is $26.85 an hour in the Rapid City area, compared with $30.67 nationally. The 25th to 75th percentile range is $21.82 to $29.47.
+What do basic and premium shower pan work cost in Rapid City?
For 1 pan, basic work runs $840 to $1,550 and premium work $1,850 to $2,550. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Rapid City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.