Kitchen cabinets cost in Cheyenne, WY
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (25 linear ft)
- $4,050 – $13,400
- Per linear ft
- $143 – $478
- before permit
- Versus US midpoint
- −4%
- US $9,150
- Rank of 300 metros
- #147
- 1 = most expensive
Local price for new kitchen cabinets in the Cheyenne area: $4,050 to $13,400 for 25 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% lower than the US figure. Carpenters earn a median of $27.00 an hour in the Cheyenne area, 7% below the US median of $29.12.
Estimate your kitchen cabinets cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 25 linear ft in Cheyenne, WY, standard level
$6,850 to $10,600
About $243 to $377 per linear ft before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,100 | $4,050 |
| Labor | $3,000 | $5,400 |
| Permits and fees | $770 | $1,150 |
| Total | $6,850 | $10,600 |
Cost breakdown for 25 linear ft in Cheyenne, WY
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,400 | $3,600 | $4,750 | 41% |
| Labor | $1,200 | $4,200 | $7,150 | 48% |
| Permits and fees | $480 | $960 | $1,450 | 11% |
| Total | $4,050 | $8,700 | $13,400 | 100% |
Why Cheyenne prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 80%, electricians at 10%, plumbers, pipefitters and steamfitters at 10%. Weighted together, Cheyenne wages are 0.96 times the national level. Labor makes up about 48% of the midpoint estimate (48% at national prices).
Materials are scaled with BEA's regional price parity for goods. Cheyenne is at 95.4 against 100 for the US, so a materials line of $3,750 nationally becomes $3,600 here (midpoint, 25 linear ft). Permits follow the all-items index of 96.5: $480 to $1,450.
Cost by quality level and size in Cheyenne
The cited range is split into basic, standard and premium bands, then scaled to Cheyenne. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small galley (15 linear ft) to large kitchen (40 linear ft).
Basic
$4,050 to $7,800
Stock cabinets, same layout
Standard
$6,850 to $10,600
Semi-custom with upgraded finishes
Premium
$9,650 to $13,400
Custom cabinetry, new layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small galley (15 linear ft) | $2,650 – $5,000 | $4,400 – $6,800 | $6,200 – $8,600 |
| 10x10 kitchen (20 linear ft) | $3,350 – $6,400 | $5,650 – $8,700 | $7,950 – $11,000 |
| average kitchen (25 linear ft) | $4,050 – $7,800 | $6,850 – $10,600 | $9,650 – $13,400 |
| large kitchen (40 linear ft) | $6,200 – $11,900 | $10,500 – $16,200 | $14,800 – $20,600 |
Who does the work: Cheyenne trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Cheyenne the blend is 0.96.
Carpenters (47-2031), 80% of the weighting: a median of $27.00 an hour, 7% below the US median of $29.12. The middle half of them earn between $23.02 and $28.85 an hour. About 310 work in the metro. That is 64.0 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For electricians (47-2111, weighted 10%) the local median is $35.86 an hour, which is 18% above the national $30.38. The middle half of them earn between $27.95 and $38.02 an hour. BLS counts 530 of them working in the area, 109.3 for every 10,000 jobs (US: 48.7), so the local bench is deeper than average.
Plumbers, pipefitters and steamfitters (47-2152), 10% of the weighting: a median of $29.55 an hour, 4% below the US median of $30.67. The middle half of them earn between $22.55 and $36.76 an hour. About 190 work in the metro. That is 39.2 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $220 to the midpoint estimate; the 25th percentile takes off about $480. That is a swing of roughly 5.5% to 2.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Cheyenne has 48,470 jobs in total (BLS, May 2025), ranking 300th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $23.02 | $27.00 | $28.85 | $29.12 | 0.93 | metro |
| Electricians (47-2111) | 10% | $27.95 | $35.86 | $38.02 | $30.38 | 1.18 | metro |
| Plumbers, pipefitters and steamfitters (47-2152) | 10% | $22.55 | $29.55 | $36.76 | $30.67 | 0.96 | metro |
| Blended | 100% | 0.96 | |||||
Cheyenne against nearby metros and the rest of Wyoming
Same job, same size (25 linear ft), priced for the nearest metros. Denver is the priciest of the group at $9,450.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Cheyenne, WYthis page | $4,050 – $13,400 | $8,700 | |
| Greeley, CO55 miles | $4,100 – $13,500 | $8,800 | +1% |
| Fort Collins, CO60 miles | $4,100 – $13,500 | $8,800 | +1% |
| Boulder, CO90 miles | $4,150 – $13,800 | $9,000 | +3% |
| Denver, CO130 miles | $4,350 – $14,600 | $9,450 | +9% |
| Colorado Springs, CO170 miles | $4,100 – $13,400 | $8,750 | level |
| Wyoming (statewide) | $4,050 – $13,400 | $8,750 | level |
| United States | $4,250 – $14,000 | $9,150 | +5% |
Out of the 300 metros we cover, Cheyenne ranks #147 for the cost of this job (#1 is the most expensive). Statewide, Cheyenne is 0% below the Wyoming figure.
Cheyenne is the only Wyoming metro we cover, so the statewide page is the only in-state comparison. It uses statewide wages, which include rural areas.
Metros of a similar size
Big cities and small ones price differently, so here is Cheyenne against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lake Havasu City, AZ | 56,490 jobs | $3,850 – $12,200 | $8,050 | −8% |
| Pittsfield, MA | 56,810 jobs | $4,250 – $14,400 | $9,300 | +7% |
| Punta Gorda, FL | 57,530 jobs | $3,950 – $12,500 | $8,200 | −6% |
| Texarkana, TX | 57,580 jobs | $3,700 – $11,400 | $7,550 | −13% |
Planning more than one job in Cheyenne?
Jobs that often go together with kitchen cabinets are priced below at their usual sizes, using the same Cheyenne wage and price inputs. Compared with national midpoints, shower pan comes out highest (−3%) and storm door lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen remodel | 120 sq ft | $17,700 – $30,100 | −4% |
| Storm door | 1 door | $330 – $900 | −5% |
| Front door | 1 door | $470 – $2,350 | −5% |
| Bathroom remodel | 45 sq ft | $4,500 – $22,400 | −4% |
| Shower pan | 1 pan | $910 – $2,700 | −3% |
| Kitchen backsplash | 30 sq ft | $290 – $1,450 | −3% |
Specs and site conditions that change a Cheyenne bid
Permit
Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.
Stock, semi-custom or custom
Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).
Layout changes
Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,850 to $10,600 for Cheyenne, WY is attached.
Detailed kitchen cabinets report for Cheyenne, WY, $9
The report lays out the kitchen cabinets numbers for Cheyenne, WY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen cabinets in Cheyenne: your questions
+How much does it cost to replace kitchen cabinets in Cheyenne?
For 25 linear ft, expect $4,050 to $13,400 in the Cheyenne area. A standard-spec job lands at $6,850 to $10,600. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for kitchen cabinets in Cheyenne?
About $143 to $478 per linear ft for materials and labor, plus $480 to $1,450 for the permit if one is needed. The US range is $150 to $500.
+Is kitchen cabinets cheaper in Cheyenne or Greeley?
Greeley is 55 miles away. The midpoint for 25 linear ft there is $8,800, which is 1% more than Cheyenne ($8,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Cheyenne?
About 48% at the midpoint, or $4,200 out of $8,700. Materials are 41% and permits 11%. Nationally, labor is 48%.
+What would average kitchen (25 linear ft) cost in Cheyenne?
$4,050 to $13,400. Pick a different size in the estimator above to get your own number.
+Does kitchen cabinets need a permit in Cheyenne?
Often, but rules are set by your city or county building office, so call before you hire. Budget $480 to $1,450 for fees in the Cheyenne area (our national range of $500 to $1,500 scaled by the local price level).
+Is Cheyenne expensive for kitchen cabinets compared with the rest of Wyoming?
Cheyenne is 0% below the Wyoming statewide estimate ($8,750 at the midpoint).
+What do carpenters earn in Cheyenne?
The BLS median is $27.00 an hour in the Cheyenne area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.02 to $28.85.
+What do basic and premium kitchen cabinets work cost in Cheyenne?
For 25 linear ft, basic work runs $4,050 to $7,800 and premium work $9,650 to $13,400. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.
Kitchen cabinets near Cheyenne
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Do Kitchen Cabinets Cost? (2026 Prices) (accessed November 4, 2026)
- HomeGuide: How Much Does Cabinet Installation Cost? (New 2026 Prices) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.