Skip to content
CostLocal

Inground pool cost in Yakima, WA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (450 sq ft)
$39,600 – $123,500
Per sq ft
$87.50 – $274
before permit
Versus US midpoint
+10%
US $74,500
Rank of 300 metros
#70
1 = most expensive

Local price for an inground pool in the Yakima area: $39,600 to $123,500 for 450 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% higher than the US figure. Construction laborers earn a median of $23.47 an hour in the Yakima area, 4% above the US median of $22.66.

Estimate your inground pool cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Fiberglass pool, standard size

Estimated cost for 450 sq ft in Yakima, WA, standard level

$64,700 to $98,300

About $144 to $218 per sq ft before permits. Labor is about 54% of the bill.

Cost breakdown
PartLowHigh
Materials$29,600$45,100
Labor$35,000$53,000
Permits and fees$150$230
Total$64,700$98,300
Save and get a PDF report

Cost breakdown for 450 sq ft in Yakima, WA

Part of the jobLowMidpointHighShare
Materials$18,000$37,300$56,70046%
Labor$21,500$44,000$66,50054%
Permits and fees$95$190$2900%
Total$39,600$81,500$123,500100%

Why Yakima prices look the way they do

Labor is 54% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (40%), operating engineers and other construction equipment operators (30%), brickmasons and blockmasons (20%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Yakima the blended ratio comes out at 1.14.

Materials are scaled with BEA's regional price parity for goods. Yakima is at 105.0 against 100 for the US, so a materials line of $35,600 nationally becomes $37,300 here (midpoint, 450 sq ft). Permits follow the all-items index of 95.5: $95 to $290.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Yakima. The wage table below marks each row.

Yakima against nearby metros and the rest of Washington

Of the five closest metros, none is cheaper than Yakima. Bremerton comes closest at about $86,000.

Comparison with nearby areas
AreaRangeMidpointvs. here
Yakima, WAthis page$39,600 – $123,500$81,500
Kennewick, WA70 miles$42,300 – $132,000$87,300+7%
Seattle, WA90 miles$45,300 – $141,500$93,300+14%
Portland, OR100 miles$42,200 – $132,000$87,100+7%
Olympia, WA105 miles$43,800 – $136,500$90,200+11%
Bremerton, WA120 miles$41,700 – $130,500$86,000+5%
Washington (statewide)$42,400 – $132,500$87,400+7%
United States$36,100 – $113,000$74,500−9%

Out of the 300 metros we cover, Yakima ranks #70 for the cost of this job (#1 is the most expensive). Statewide, Yakima is 7% below the Washington figure.

Elsewhere in Washington

Washington metros compared with Yakima
MetroSizeRangeMidpointvs. here
Seattle, WA2,086,210 jobs$45,300 – $141,500$93,300+14%
Spokane, WA255,820 jobs$40,200 – $125,500$82,900+2%
Olympia, WA130,300 jobs$43,800 – $136,500$90,200+11%
Kennewick, WA129,490 jobs$42,300 – $132,000$87,300+7%
Bremerton, WA93,740 jobs$41,700 – $130,500$86,000+5%
Bellingham, WA91,390 jobs$44,200 – $138,000$91,100+12%

Metros of a similar size

Big cities and small ones price differently, so here is Yakima against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Binghamton, NY97,030 jobs$38,800 – $121,000$80,000−2%
Athens, GA95,800 jobs$31,500 – $98,500$65,000−20%
Lynchburg, VA97,190 jobs$32,400 – $101,500$66,900−18%
Fort Smith, AR95,560 jobs$30,800 – $96,200$63,500−22%

Who does the work: Yakima trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Yakima the blend is 1.14.

For construction laborers (47-2061, weighted 40%) the local median is $23.47 an hour, which is 4% above the national $22.66. The middle half of them earn between $21.25 and $29.70 an hour. BLS counts 590 of them working in the area, 60.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $34.52 an hour, 20% above the US median of $28.78. The middle half of them earn between $29.42 and $39.41 an hour. About 190 work in the metro. That is 19.6 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.

Brickmasons and blockmasons (47-2021) carry 20% of the labor weighting. BLS does not publish this trade for the Yakima metro, so we used the Washington statewide median: $40.00 an hour against $29.87 for the US. The middle half of them earn between $35.14 and $49.11 an hour.

Plumbers, pipefitters and steamfitters (47-2152), 10% of the weighting: a median of $29.28 an hour, 5% below the US median of $30.67. The middle half of them earn between $24.00 and $40.04 an hour. About 240 work in the metro. That is 24.7 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $4,250 to the midpoint estimate; the 25th percentile takes off about $1,500. That is a swing of roughly 1.9% to 5.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Yakima has 97,010 jobs in total (BLS, May 2025), ranking 208th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)40%$21.25$23.47$29.70$22.661.04metro
Operating engineers and other construction equipment operators (47-2073)30%$29.42$34.52$39.41$28.781.20metro
Brickmasons and blockmasons (47-2021)20%$35.14$40.00$49.11$29.871.34state
Plumbers, pipefitters and steamfitters (47-2152)10%$24.00$29.28$40.04$30.670.95metro
Blended100%1.14

Why two Yakima quotes can differ

  • Pool type

    Vinyl pools are $25,000-$65,000, fiberglass $45,000-$100,000, and concrete or gunite $50,000-$120,000 (HomeGuide).

  • Maintenance

    Pool maintenance is $80-$150 a month; concrete pools also need an acid wash every 3-5 years at $300-$1,000.

  • Permit

    A building permit for a pool is $100-$300 and contractors often include it. Many cities add plumbing and electrical permits.

The best months for inground pool in Yakima

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Yakima Air Terminal (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For pouring concrete, the comfortable months in Yakima are May through June and August through September: 4 of 12. Outside them, January, February, March, April, October, November and December have an average overnight low of 40°F or below, and July has an average daytime high of 90°F or more.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Heat matters for concrete as well. With average highs of 90°F or more in July, crews often start early, wet the base and plan for faster set times.

Yakima gets about 8 inches of precipitation in a normal year, including roughly 20 inches of snow. The wettest months are January, November and December (1.4 inches in December). Inside the workable window, August and September are the driest, at 0.2 and 0.2 inches. The station averages about 40 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Yakima Air Terminal (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan40241.2Cold
Feb47260.8Cold
Mar57300.6Cold
Apr65350.6Cold
May74440.7Workable
Jun81500.5Workable
Jul90550.2Hot
Aug89530.2Workable
Sep79450.2Workable
Oct64350.6Cold
Nov49270.9Cold
Dec38231.4Cold

Planning more than one job in Yakima?

Jobs that often go together with inground pool are priced below at their usual sizes, using the same Yakima wage and price inputs. Compared with national midpoints, concrete patio comes out highest (+17%) and wood deck lowest (+5%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Aluminum fence150 linear ft$4,050 – $12,100+6%
Paver patio300 sq ft$3,300 – $5,950+10%
Concrete patio300 sq ft$1,400 – $4,750+17%
Wood deck300 sq ft$7,900 – $15,900+5%
French drain60 linear ft$680 – $2,400+14%
Retaining wall200 sq ft of wall face$8,100 – $15,000+13%

Cost by quality level and size in Yakima

The cited range is split into basic, standard and premium bands, then scaled to Yakima. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small pool (400 sq ft) to large (800 sq ft).

Basic

$39,600 to $73,100

Vinyl-liner pool, small size

Standard

$64,700 to $98,300

Fiberglass pool, standard size

Premium

$89,900 to $123,500

Concrete or gunite, large with custom features

Cost by size and quality level
SizeBasicStandardPremium
small pool (400 sq ft)$35,200 – $65,000$57,600 – $87,400$80,000 – $110,000
average (512 sq ft)$45,000 – $83,200$73,600 – $112,000$102,500 – $140,500
large (800 sq ft)$70,200 – $130,000$115,000 – $174,500$159,500 – $219,500

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $64,700 to $98,300 for Yakima, WA is attached.

Detailed inground pool report for Yakima, WA, $9

Multi-page report for Yakima, WA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Inground pool in Yakima: your questions

+How much does it cost to install an inground pool in Yakima?

For 450 sq ft, expect $39,600 to $123,500 in the Yakima area. A standard-spec job lands at $64,700 to $98,300. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for inground pool in Yakima?

About $87.50 to $274 per sq ft for materials and labor, plus $95 to $290 for the permit if one is needed. The US range is $80 to $250.

+Is inground pool cheaper in Yakima or Kennewick?

Kennewick is 70 miles away. The midpoint for 450 sq ft there is $87,300, which is 7% more than Yakima ($81,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Yakima?

About 54% at the midpoint, or $44,000 out of $81,500. Materials are 46% and permits 0%. Nationally, labor is 52%.

+What would average (512 sq ft) cost in Yakima?

$45,000 to $140,500. Pick a different size in the estimator above to get your own number.

+Does inground pool need a permit in Yakima?

Often, but rules are set by your city or county building office, so call before you hire. Budget $95 to $290 for fees in the Yakima area (our national range of $100 to $300 scaled by the local price level).

+Is Yakima expensive for inground pool compared with the rest of Washington?

Yakima is 7% below the Washington statewide estimate ($87,400 at the midpoint). We cover 7 metros in Washington; see the state page to compare them.

+What do construction laborers earn in Yakima?

The BLS median is $23.47 an hour in the Yakima area, compared with $22.66 nationally. The 25th to 75th percentile range is $21.25 to $29.70.

+What do basic and premium inground pool work cost in Yakima?

For 450 sq ft, basic work runs $39,600 to $73,100 and premium work $89,900 to $123,500. Basic means: vinyl-liner pool, small size. Premium means: concrete or gunite, large with custom features.

+When is the best time to install an inground pool in Yakima?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through June and August through September. August and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Inground pool near Yakima

Inground pool: all pricesInground pool in WashingtonAll projects in YakimaWashington cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split. It is a category average, not a pool-specific one, so read the pool materials line loosely.