Aluminum fence cost in Yakima, WA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,050 – $12,100
- Per linear ft
- $26.50 – $79.50
- before permit
- Versus US midpoint
- +6%
- US $7,600
- Rank of 300 metros
- #49
- 1 = most expensive
Yakima homeowners pay roughly $4,050 to $12,100 to install an aluminum fence at 150 linear ft, or $26.50 to $79.50 per linear ft (permit not included). Against the US midpoint, Yakima is 6% higher. Building materials run about 5% above the US average here (BEA goods price index 105.0).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Yakima, WA, standard level
$6,450 to $9,650
About $42.50 to $63.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,000 | $6,200 |
| Labor | $2,350 | $3,350 |
| Permits and fees | $70 | $110 |
| Total | $6,450 | $9,650 |
Cost breakdown for 150 linear ft in Yakima, WA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,350 | $5,100 | $7,900 | 64% |
| Labor | $1,650 | $2,850 | $4,050 | 35% |
| Permits and fees | $40 | $90 | $140 | 1% |
| Total | $4,050 | $8,050 | $12,100 | 100% |
What is behind the Yakima number
Labor is 35% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Yakima the blended ratio comes out at 1.08.
On the materials line, the BEA goods price index for the Yakima metro is 105.0 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,100, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (95.5) and land at $40 to $140.
What nearby projects cost in Yakima
Because every project leans on different trades, Yakima's wage level does not move all prices equally. Against the US midpoint, inground pool runs +10% and chain-link fence +4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,750 – $9,550 | +5% |
| Wood fence | 150 linear ft | $3,200 – $8,000 | +4% |
| Chain-link fence | 150 linear ft | $1,600 – $6,400 | +4% |
| Inground pool | 450 sq ft | $39,600 – $123,500 | +10% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Yakima is 1.08 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $30.43 an hour, which is 4% above the national $29.12. The middle half of them earn between $27.61 and $44.37 an hour. BLS counts 480 of them working in the area, 49.5 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 40% of the weighting: a median of $23.47 an hour, 4% above the US median of $22.66. The middle half of them earn between $21.25 and $29.70 an hour. About 590 work in the metro. That is 60.8 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 20%) the local median is $37.43 an hour, which is 26% above the national $29.71. The middle half of them earn between $28.33 and $47.76 an hour. BLS counts 90 of them working in the area, 9.3 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($44.37 an hour) instead of the median, the labor line grows by about $500. At the 25th percentile ($27.61) it shrinks by about $100. The total moves by 6.2% or 1.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 97,010 jobs in the Yakima area. That makes it the 208th largest of the 300 metros we cover, with 0.06% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $27.61 | $30.43 | $44.37 | $29.12 | 1.04 | metro |
| Construction laborers (47-2061) | 40% | $21.25 | $23.47 | $29.70 | $22.66 | 1.04 | metro |
| Sheet metal workers (47-2211) | 20% | $28.33 | $37.43 | $47.76 | $29.71 | 1.26 | metro |
| Blended | 100% | 1.08 | |||||
When to schedule aluminum fence in Yakima
We use NOAA's 1991-2020 climate normals for Yakima Air Terminal (5 miles from the city center). These are 30-year monthly averages, not forecasts.
February through June and August through November are the stretches where exterior installation runs into the fewest weather problems in Yakima (9 of 12 months). January and December have an average daytime high under 45°F; July has an average daytime high of 90°F or more.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Yakima gets about 8 inches of precipitation in a normal year, including roughly 20 inches of snow. The wettest months are January, November and December (1.4 inches in December). Inside the workable window, August and September are the driest, at 0.2 and 0.2 inches. The station averages about 40 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 24 | 1.2 | Cold |
| Feb | 47 | 26 | 0.8 | Workable |
| Mar | 57 | 30 | 0.6 | Workable |
| Apr | 65 | 35 | 0.6 | Workable |
| May | 74 | 44 | 0.7 | Workable |
| Jun | 81 | 50 | 0.5 | Workable |
| Jul | 90 | 55 | 0.2 | Hot |
| Aug | 89 | 53 | 0.2 | Workable |
| Sep | 79 | 45 | 0.2 | Workable |
| Oct | 64 | 35 | 0.6 | Workable |
| Nov | 49 | 27 | 0.9 | Workable |
| Dec | 38 | 23 | 1.4 | Cold |
Yakima against nearby metros and the rest of Washington
Same job, same size (150 linear ft), priced for the nearest metros. Seattle is the priciest of the group at $8,750.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Yakima, WAthis page | $4,050 – $12,100 | $8,050 | |
| Kennewick, WA70 miles | $4,200 – $12,500 | $8,350 | +4% |
| Seattle, WA90 miles | $4,450 – $13,100 | $8,750 | +9% |
| Portland, OR100 miles | $4,200 – $12,600 | $8,400 | +4% |
| Olympia, WA105 miles | $4,200 – $12,500 | $8,350 | +4% |
| Bremerton, WA120 miles | $4,200 – $12,500 | $8,300 | +3% |
| Washington (statewide) | $4,350 – $12,900 | $8,600 | +7% |
| United States | $3,800 – $11,400 | $7,600 | −6% |
Across 300 US metros, Yakima comes in at #49 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Yakima is 6% below the Washington figure.
Other Washington metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Seattle, WA | 2,086,210 jobs | $4,450 – $13,100 | $8,750 | +9% |
| Spokane, WA | 255,820 jobs | $4,050 – $12,100 | $8,050 | level |
| Olympia, WA | 130,300 jobs | $4,200 – $12,500 | $8,350 | +4% |
| Kennewick, WA | 129,490 jobs | $4,200 – $12,500 | $8,350 | +4% |
| Bremerton, WA | 93,740 jobs | $4,200 – $12,500 | $8,300 | +3% |
| Bellingham, WA | 91,390 jobs | $4,300 – $12,800 | $8,550 | +6% |
Cities with a workforce like Yakima's
Big cities and small ones price differently, so here is Yakima against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Binghamton, NY | 97,030 jobs | $3,850 – $11,500 | $7,700 | −5% |
| Athens, GA | 95,800 jobs | $3,350 – $10,200 | $6,800 | −16% |
| Lynchburg, VA | 97,190 jobs | $3,400 – $10,400 | $6,900 | −14% |
| Fort Smith, AR | 95,560 jobs | $3,250 – $9,950 | $6,600 | −18% |
Aluminum fence: what moves the price in Yakima
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Add-ons priced for Yakima
Extras are quoted nationally and then scaled to Yakima by the average of the local wage index (1.08) and goods index (1.05), a factor of 1.07. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $210 – $960 |
Cost by quality level and size in Yakima
Three bands are cut from the same cited range and localized for Yakima wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$4,050 to $7,250
Standard picket or ornamental, 4 ft
Standard
$6,450 to $9,650
Ornamental pool-code fence, 4-5 ft
Premium
$8,850 to $12,100
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,700 – $4,850 | $4,300 – $6,500 | $5,950 – $8,100 |
| 150 ft (150 linear ft) | $4,050 – $7,250 | $6,450 – $9,650 | $8,850 – $12,100 |
| 200 ft (200 linear ft) | $5,350 – $9,650 | $8,550 – $12,900 | $11,800 – $16,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,450 to $9,650 for Yakima, WA is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Yakima, WA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Yakima: your questions
+How much does it cost to install an aluminum fence in Yakima?
For 150 linear ft, expect $4,050 to $12,100 in the Yakima area. A standard-spec job lands at $6,450 to $9,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Yakima?
About $26.50 to $79.50 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Yakima or Kennewick?
Kennewick is 70 miles away. The midpoint for 150 linear ft there is $8,350, which is 4% more than Yakima ($8,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Yakima?
About 35% at the midpoint, or $2,850 out of $8,050. Materials are 64% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Yakima?
$4,050 to $12,100. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Yakima?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Yakima area (our national range of $40 to $150 scaled by the local price level).
+Is Yakima expensive for aluminum fence compared with the rest of Washington?
Yakima is 6% below the Washington statewide estimate ($8,600 at the midpoint). We cover 7 metros in Washington; see the state page to compare them.
+What do carpenters earn in Yakima?
The BLS median is $30.43 an hour in the Yakima area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.61 to $44.37.
+What do basic and premium aluminum fence work cost in Yakima?
For 150 linear ft, basic work runs $4,050 to $7,250 and premium work $8,850 to $12,100. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Yakima?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through June and August through November. August and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Yakima?
$210 to $960, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Yakima
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.