Wood deck cost in Yakima, WA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $7,900 – $15,900
- Per sq ft
- $26 – $52.50
- before permit
- Versus US midpoint
- +5%
- US $11,400
- Rank of 300 metros
- #50
- 1 = most expensive
Local price for a wood deck in the Yakima area: $7,900 to $15,900 for 300 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.0).
Estimate your wood deck cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Yakima, WA, standard level
$10,300 to $13,500
About $34 to $44.50 per sq ft before permits. Labor is about 43% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $5,750 | $7,500 |
| Labor | $4,500 | $5,850 |
| Permits and fees | $75 | $110 |
| Total | $10,300 | $13,500 |
Cost breakdown for 300 sq ft in Yakima, WA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,400 | $6,600 | $8,800 | 56% |
| Labor | $3,450 | $5,150 | $6,900 | 43% |
| Permits and fees | $50 | $95 | $140 | 1% |
| Total | $7,900 | $11,900 | $15,900 | 100% |
What is behind the Yakima number
Labor is 43% of the midpoint bill here, against 44% nationally. The mix of trades behind this job is carpenters (80%), construction laborers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Yakima the blended ratio comes out at 1.04.
Materials are scaled with BEA's regional price parity for goods. Yakima is at 105.0 against 100 for the US, so a materials line of $6,300 nationally becomes $6,600 here (midpoint, 300 sq ft). Permits follow the all-items index of 95.5: $50 to $140.
The best months for wood deck in Yakima
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Yakima Air Terminal (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Yakima are February through June and August through November: 9 of 12. Outside them, January and December have an average daytime high under 45°F, and July has an average daytime high of 90°F or more.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Yakima gets about 8 inches of precipitation in a normal year, including roughly 20 inches of snow. The wettest months are January, November and December (1.4 inches in December). Inside the workable window, August and September are the driest, at 0.2 and 0.2 inches. The station averages about 40 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 24 | 1.2 | Cold |
| Feb | 47 | 26 | 0.8 | Workable |
| Mar | 57 | 30 | 0.6 | Workable |
| Apr | 65 | 35 | 0.6 | Workable |
| May | 74 | 44 | 0.7 | Workable |
| Jun | 81 | 50 | 0.5 | Workable |
| Jul | 90 | 55 | 0.2 | Hot |
| Aug | 89 | 53 | 0.2 | Workable |
| Sep | 79 | 45 | 0.2 | Workable |
| Oct | 64 | 35 | 0.6 | Workable |
| Nov | 49 | 27 | 0.9 | Workable |
| Dec | 38 | 23 | 1.4 | Cold |
Who does the work: Yakima trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Yakima the blend is 1.04.
Carpenters (47-2031), 80% of the weighting: a median of $30.43 an hour, 4% above the US median of $29.12. The middle half of them earn between $27.61 and $44.37 an hour. About 480 work in the metro. That is 49.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 20%) the local median is $23.47 an hour, which is 4% above the national $22.66. The middle half of them earn between $21.25 and $29.70 an hour. BLS counts 590 of them working in the area, 60.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,900 to the midpoint estimate; the 25th percentile takes off about $380. That is a swing of roughly 3.2% to 16.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Yakima has 97,010 jobs in total (BLS, May 2025), ranking 208th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $27.61 | $30.43 | $44.37 | $29.12 | 1.04 | metro |
| Construction laborers (47-2061) | 20% | $21.25 | $23.47 | $29.70 | $22.66 | 1.04 | metro |
| Blended | 100% | 1.04 | |||||
Related projects, priced for Yakima
Jobs that often go together with wood deck are priced below at their usual sizes, using the same Yakima wage and price inputs. Compared with national midpoints, concrete patio comes out highest (+17%) and composite deck lowest (+5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Composite deck | 300 sq ft | $12,600 – $25,200 | +5% |
| Concrete patio | 300 sq ft | $1,400 – $4,750 | +17% |
| Paver patio | 300 sq ft | $3,300 – $5,950 | +10% |
| Detached garage | 576 sq ft | $31,600 – $63,400 | +9% |
Optional extras in Yakima
Add-ons start from national price ranges and are scaled by 1.05 for Yakima, which is the average of the area's wage index (1.04) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add stairs (flat) | $1,450 – $2,700 |
Why two Yakima quotes can differ
Wood species
Pressure-treated pine is the cheapest at $25-$50 per sq ft installed. Ipe runs $50-$70 and bamboo $27-$52 (HomeGuide).
Height and stairs
A second-story deck needs more structure. New stairs run $1,400-$2,600 installed.
Railing
A wood or vinyl railing adds $20-$60 per linear foot.
Pick a size, pick a tier: wood deck pricing in Yakima
The cited range is split into basic, standard and premium bands, then scaled to Yakima. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x12 (120 sq ft) to 20x20 (400 sq ft).
Basic
$7,900 to $11,100
Pressure-treated pine, low to the ground, simple rectangle
Standard
$10,300 to $13,500
Cedar or upgraded pine, stairs and a railing
Premium
$12,700 to $15,900
Hardwood decking, multi-level, built-in features
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x12 (120 sq ft) | $3,200 – $4,500 | $4,150 – $5,450 | $5,150 – $6,450 |
| 12x12 (144 sq ft) | $3,800 – $5,350 | $5,000 – $6,500 | $6,150 – $7,700 |
| 16x20 (320 sq ft) | $8,400 – $11,800 | $11,000 – $14,400 | $13,500 – $16,900 |
| 20x20 (400 sq ft) | $10,500 – $14,700 | $13,700 – $17,900 | $16,900 – $21,100 |
Is Yakima cheap or dear? The local comparison
Of the five closest metros, none is cheaper than Yakima. Olympia comes closest at about $12,000.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Yakima, WAthis page | $7,900 – $15,900 | $11,900 | |
| Kennewick, WA70 miles | $8,050 – $16,100 | $12,100 | +2% |
| Seattle, WA90 miles | $8,600 – $17,200 | $12,900 | +9% |
| Portland, OR100 miles | $8,450 – $16,900 | $12,700 | +7% |
| Olympia, WA105 miles | $7,950 – $16,000 | $12,000 | +1% |
| Bremerton, WA120 miles | $8,050 – $16,200 | $12,100 | +2% |
| Washington (statewide) | $8,500 – $17,000 | $12,700 | +7% |
| United States | $7,550 – $15,200 | $11,400 | −4% |
Out of the 300 metros we cover, Yakima ranks #50 for the cost of this job (#1 is the most expensive). Statewide, Yakima is 7% below the Washington figure.
Elsewhere in Washington
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Seattle, WA | 2,086,210 jobs | $8,600 – $17,200 | $12,900 | +9% |
| Spokane, WA | 255,820 jobs | $7,850 – $15,800 | $11,800 | level |
| Olympia, WA | 130,300 jobs | $7,950 – $16,000 | $12,000 | +1% |
| Kennewick, WA | 129,490 jobs | $8,050 – $16,100 | $12,100 | +2% |
| Bremerton, WA | 93,740 jobs | $8,050 – $16,200 | $12,100 | +2% |
| Bellingham, WA | 91,390 jobs | $8,450 – $17,000 | $12,700 | +7% |
Metros of a similar size
Big cities and small ones price differently, so here is Yakima against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Binghamton, NY | 97,030 jobs | $7,650 – $15,300 | $11,500 | −3% |
| Athens, GA | 95,800 jobs | $6,550 – $13,200 | $9,850 | −17% |
| Lynchburg, VA | 97,190 jobs | $6,750 – $13,500 | $10,100 | −15% |
| Fort Smith, AR | 95,560 jobs | $6,350 – $12,700 | $9,550 | −20% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $10,300 to $13,500 for Yakima, WA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Yakima, WA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Wood deck in Yakima: your questions
+How much does it cost to build a wood deck in Yakima?
For 300 sq ft, expect $7,900 to $15,900 in the Yakima area. A standard-spec job lands at $10,300 to $13,500. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for wood deck in Yakima?
About $26 to $52.50 per sq ft for materials and labor, plus $50 to $140 for the permit if one is needed. The US range is $25 to $50.
+Is wood deck cheaper in Yakima or Kennewick?
Kennewick is 70 miles away. The midpoint for 300 sq ft there is $12,100, which is 2% more than Yakima ($11,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Yakima?
About 43% at the midpoint, or $5,150 out of $11,900. Materials are 56% and permits 1%. Nationally, labor is 44%.
+What would 16x20 (320 sq ft) cost in Yakima?
$8,400 to $16,900. Pick a different size in the estimator above to get your own number.
+Does wood deck need a permit in Yakima?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $140 for fees in the Yakima area (our national range of $50 to $150 scaled by the local price level).
+Is Yakima expensive for wood deck compared with the rest of Washington?
Yakima is 7% below the Washington statewide estimate ($12,700 at the midpoint). We cover 7 metros in Washington; see the state page to compare them.
+What do carpenters earn in Yakima?
The BLS median is $30.43 an hour in the Yakima area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.61 to $44.37.
+What do basic and premium wood deck work cost in Yakima?
For 300 sq ft, basic work runs $7,900 to $11,100 and premium work $12,700 to $15,900. Basic means: pressure-treated pine, low to the ground, simple rectangle. Premium means: hardwood decking, multi-level, built-in features.
+When is the best time to build a wood deck in Yakima?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through June and August through November. August and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add stairs" add in Yakima?
$1,450 to $2,700, from a national range scaled by the local wage and goods indexes.
Wood deck near Yakima
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Build a Deck? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- HomeGuide: How Much Does Composite Decking Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020