Gutters cost in Laredo, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,100 – $3,750
- Per linear ft
- $7 – $22.50
- before permit
- Versus US midpoint
- −11%
- US $2,750
- Rank of 300 metros
- #284
- 1 = most expensive
Local price for new gutters in the Laredo area: $1,100 to $3,750 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Sheet metal workers earn a median of $26.08 an hour in the Laredo area, 12% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Laredo, TX, standard level
$1,900 to $2,950
About $11.50 to $17.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,850 |
| Labor | $720 | $980 |
| Permits and fees | $50 | $120 |
| Total | $1,900 | $2,950 |
Cost breakdown for 160 linear ft in Laredo, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $600 | $1,500 | $2,400 | 62% |
| Labor | $520 | $850 | $1,150 | 35% |
| Permits and fees | $0 | $85 | $170 | 4% |
| Total | $1,100 | $2,450 | $3,750 | 100% |
Where the Laredo price comes from
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Laredo wages are 0.81 times the national level. Labor makes up about 35% of the midpoint estimate (38% at national prices). BLS does not publish this trade for the metro, so we used the Texas statewide median.
Materials are scaled with BEA's regional price parity for goods. Laredo is at 93.8 against 100 for the US, so a materials line of $1,600 nationally becomes $1,500 here (midpoint, 160 linear ft). Permits follow the all-items index of 87.0: $0 to $170.
Data note: 70% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Laredo. The wage table below marks each row.
Planning more than one job in Laredo?
Jobs that often go together with gutters are priced below at their usual sizes, using the same Laredo wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−6%) and vinyl siding lowest (−17%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,150 – $10,800 | −14% |
| Metal roof | 2,000 sq ft of roof | $8,650 – $28,700 | −12% |
| Vinyl siding | 2,100 sq ft of wall | $6,950 – $20,800 | −17% |
| French drain | 60 linear ft | $510 – $1,800 | −15% |
| Attic insulation | 1,000 sq ft | $940 – $3,750 | −6% |
The best months for gutters in Laredo
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Laredo 2 (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Laredo are October through April: 7 of 12. Outside them, May, June, July, August and September have an average daytime high of 90°F or more.
Laredo gets about 20 inches of precipitation in a normal year. The wettest months are May, July and September (3.9 inches in September). Inside the workable window, January and February are the driest, at 0.8 and 0.7 inches. The station averages about 178 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 68 | 47 | 0.8 | Workable |
| Feb | 74 | 52 | 0.7 | Workable |
| Mar | 81 | 58 | 1.3 | Workable |
| Apr | 88 | 65 | 1.3 | Workable |
| May | 94 | 72 | 2.8 | Hot |
| Jun | 99 | 76 | 1.8 | Hot |
| Jul | 100 | 77 | 1.9 | Hot |
| Aug | 101 | 77 | 1.6 | Hot |
| Sep | 94 | 73 | 3.9 | Hot |
| Oct | 87 | 66 | 1.7 | Workable |
| Nov | 77 | 56 | 1.0 | Workable |
| Dec | 69 | 48 | 1.1 | Workable |
Who does the work: Laredo trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Laredo the blend is 0.81.
Sheet metal workers (47-2211) carry 40% of the labor weighting. BLS does not publish this trade for the Laredo metro, so we used the Texas statewide median: $26.08 an hour against $29.71 for the US. The middle half of them earn between $21.61 and $30.51 an hour.
Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the Laredo metro, so we used the Texas statewide median: $22.13 an hour against $26.65 for the US. The middle half of them earn between $18.00 and $25.78 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $16.22 an hour, which is 28% below the national $22.66. The middle half of them earn between $13.98 and $17.72 an hour. BLS counts 400 of them working in the area, 36.6 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $60 to the midpoint estimate; the 25th percentile takes off about $65. That is a swing of roughly 2.6% to 2.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Laredo has 109,370 jobs in total (BLS, May 2025), ranking 191st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $21.61 | $26.08 | $30.51 | $29.71 | 0.88 | state |
| Roofers (47-2181) | 30% | $18.00 | $22.13 | $25.78 | $26.65 | 0.83 | state |
| Construction laborers (47-2061) | 30% | $13.98 | $16.22 | $17.72 | $22.66 | 0.72 | metro |
| Blended | 100% | 0.81 | |||||
Laredo: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Laredo. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,100 to $2,150
Vinyl or sectional aluminum, single story
Standard
$1,900 to $2,950
Seamless aluminum K-style, standard downspouts
Premium
$2,700 to $3,750
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $840 – $1,650 | $1,450 – $2,250 | $2,050 – $2,850 |
| average house (160 linear ft) | $1,100 – $2,150 | $1,900 – $2,950 | $2,700 – $3,750 |
| large house (240 linear ft) | $1,700 – $3,200 | $2,850 – $4,400 | $4,000 – $5,550 |
Laredo against nearby metros and the rest of Texas
Same job, same size (160 linear ft), priced for the nearest metros. Austin is the priciest of the group at $2,600. McAllen is the cheapest at $2,400.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Laredo, TXthis page | $1,100 – $3,750 | $2,450 | |
| McAllen, TX120 miles | $1,100 – $3,650 | $2,400 | −2% |
| Corpus Christi, TX120 miles | $1,150 – $3,800 | $2,500 | +2% |
| San Antonio, TX125 miles | $1,150 – $3,850 | $2,500 | +2% |
| Brownsville, TX160 miles | $1,150 – $3,750 | $2,450 | level |
| Austin, TX200 miles | $1,200 – $3,950 | $2,600 | +6% |
| Texas (statewide) | $1,200 – $3,950 | $2,550 | +5% |
| United States | $1,300 – $4,200 | $2,750 | +13% |
Out of the 300 metros we cover, Laredo ranks #284 for the cost of this job (#1 is the most expensive). Statewide, Laredo is 5% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $1,250 – $4,150 | $2,700 | +10% |
| Houston, TX | 3,289,720 jobs | $1,200 – $4,000 | $2,600 | +6% |
| Austin, TX | 1,293,690 jobs | $1,200 – $3,950 | $2,600 | +6% |
| San Antonio, TX | 1,126,880 jobs | $1,150 – $3,850 | $2,500 | +2% |
| El Paso, TX | 339,120 jobs | $1,100 – $3,650 | $2,350 | −3% |
| McAllen, TX | 296,700 jobs | $1,100 – $3,650 | $2,400 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Laredo against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlottesville, VA | 114,780 jobs | $1,150 – $3,900 | $2,550 | +4% |
| Tuscaloosa, AL | 108,460 jobs | $1,100 – $3,800 | $2,450 | +1% |
| Tyler, TX | 115,220 jobs | $1,100 – $3,750 | $2,450 | level |
| Bend, OR | 108,240 jobs | $1,350 – $4,450 | $2,900 | +19% |
Gutters: what moves the price in Laredo
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,900 to $2,950 for Laredo, TX is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Laredo, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Laredo: your questions
+How much does it cost to install gutters in Laredo?
For 160 linear ft, expect $1,100 to $3,750 in the Laredo area. A standard-spec job lands at $1,900 to $2,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Laredo?
About $7 to $22.50 per linear ft for materials and labor, plus $0 to $170 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Laredo or McAllen?
McAllen is 120 miles away. The midpoint for 160 linear ft there is $2,400, which is 2% less than Laredo ($2,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Laredo?
About 35% at the midpoint, or $850 out of $2,450. Materials are 62% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Laredo?
$1,100 to $3,750. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Laredo?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $170 for fees in the Laredo area (our national range of $0 to $200 scaled by the local price level).
+Is Laredo expensive for gutters compared with the rest of Texas?
Laredo is 5% below the Texas statewide estimate ($2,550 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do sheet metal workers earn in Laredo?
BLS has no published metro figure here, so we use the statewide median of $26.08 an hour, compared with $29.71 nationally. The 25th to 75th percentile range is $21.61 to $30.51.
+What do basic and premium gutters work cost in Laredo?
For 160 linear ft, basic work runs $1,100 to $2,150 and premium work $2,700 to $3,750. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Laredo?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. January and February are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Laredo
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.