Gutters cost in Tuscaloosa, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,100 – $3,800
- Per linear ft
- $7 – $22.50
- before permit
- Versus US midpoint
- −10%
- US $2,750
- Rank of 300 metros
- #274
- 1 = most expensive
New gutters in Tuscaloosa, AL usually costs $1,100 to $3,800 for 160 linear ft. That works out to about $7 to $22.50 per linear ft before permits. Compared with the national midpoint that is $290 less. Sheet metal workers earn a median of $23.14 an hour in the Tuscaloosa area, 22% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Tuscaloosa, AL, standard level
$1,900 to $3,000
About $11.50 to $18 per linear ft before permits. Labor is about 34% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $700 | $950 |
| Permits and fees | $55 | $120 |
| Total | $1,900 | $3,000 |
Cost breakdown for 160 linear ft in Tuscaloosa, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 63% |
| Labor | $510 | $820 | $1,150 | 34% |
| Permits and fees | $0 | $90 | $180 | 4% |
| Total | $1,100 | $2,450 | $3,800 | 100% |
What is behind the Tuscaloosa number
The wage side of the estimate leans on sheet metal workers, who do 40% of the hours on a typical job. Their local median is $23.14 an hour. Add the other trades involved and the blended wage index for Tuscaloosa is 0.79 (US = 1.00), which puts labor at 34% of the total.
Materials are scaled with BEA's regional price parity for goods. Tuscaloosa is at 96.4 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 160 linear ft). Permits follow the all-items index of 87.7: $0 to $180.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Tuscaloosa. The wage table below marks each row.
Tuscaloosa weather and the gutters calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Northport 2 S (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Tuscaloosa are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Tuscaloosa gets about 57 inches of precipitation in a normal year. The wettest months are February, March and April (5.6 inches in February). Inside the workable window, September and October are the driest, at 3.5 and 3.6 inches. The station averages about 89 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 56 | 35 | 5.1 | Workable |
| Feb | 61 | 38 | 5.6 | Workable |
| Mar | 68 | 45 | 5.5 | Workable |
| Apr | 76 | 52 | 5.4 | Workable |
| May | 84 | 60 | 4.0 | Workable |
| Jun | 90 | 68 | 5.3 | Hot |
| Jul | 92 | 71 | 4.9 | Hot |
| Aug | 92 | 71 | 4.2 | Hot |
| Sep | 87 | 65 | 3.5 | Workable |
| Oct | 78 | 53 | 3.6 | Workable |
| Nov | 67 | 42 | 4.8 | Workable |
| Dec | 58 | 37 | 5.2 | Workable |
Pick a size, pick a tier: gutters pricing in Tuscaloosa
The cited range is split into basic, standard and premium bands, then scaled to Tuscaloosa. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,100 to $2,200
Vinyl or sectional aluminum, single story
Standard
$1,900 to $3,000
Seamless aluminum K-style, standard downspouts
Premium
$2,700 to $3,800
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $840 – $1,650 | $1,450 – $2,250 | $2,050 – $2,900 |
| average house (160 linear ft) | $1,100 – $2,200 | $1,900 – $3,000 | $2,700 – $3,800 |
| large house (240 linear ft) | $1,700 – $3,250 | $2,850 – $4,400 | $4,050 – $5,600 |
How Tuscaloosa compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,450 to $2,500 across Tuscaloosa and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tuscaloosa, ALthis page | $1,100 – $3,800 | $2,450 | |
| Birmingham, AL60 miles | $1,150 – $3,800 | $2,450 | +1% |
| Montgomery, AL95 miles | $1,150 – $3,800 | $2,500 | +1% |
| Decatur, AL105 miles | $1,150 – $3,800 | $2,450 | level |
| Huntsville, AL130 miles | $1,150 – $3,850 | $2,500 | +1% |
| Auburn, AL140 miles | $1,100 – $3,750 | $2,450 | level |
| Alabama (statewide) | $1,100 – $3,800 | $2,450 | level |
| United States | $1,300 – $4,200 | $2,750 | +12% |
Out of the 300 metros we cover, Tuscaloosa ranks #274 for the cost of this job (#1 is the most expensive). Statewide, Tuscaloosa is 0% above the Alabama figure.
Elsewhere in Alabama
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $1,150 – $3,800 | $2,450 | +1% |
| Huntsville, AL | 266,650 jobs | $1,150 – $3,850 | $2,500 | +1% |
| Mobile, AL | 172,550 jobs | $1,100 – $3,800 | $2,450 | level |
| Montgomery, AL | 165,550 jobs | $1,150 – $3,800 | $2,500 | +1% |
| Daphne, AL | 87,120 jobs | $1,150 – $3,800 | $2,500 | +1% |
| Auburn, AL | 72,710 jobs | $1,100 – $3,750 | $2,450 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Tuscaloosa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Laredo, TX | 109,370 jobs | $1,100 – $3,750 | $2,450 | −1% |
| Bend, OR | 108,240 jobs | $1,350 – $4,450 | $2,900 | +18% |
| Charlottesville, VA | 114,780 jobs | $1,150 – $3,900 | $2,550 | +3% |
| Columbia, MO | 107,680 jobs | $1,200 – $4,000 | $2,600 | +6% |
Planning more than one job in Tuscaloosa?
Jobs that often go together with gutters are priced below at their usual sizes, using the same Tuscaloosa wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−4%) and roof replacement lowest (−13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,200 – $11,000 | −13% |
| Metal roof | 2,000 sq ft of roof | $8,550 – $28,800 | −12% |
| Vinyl siding | 2,100 sq ft of wall | $7,400 – $22,100 | −12% |
| French drain | 60 linear ft | $530 – $1,850 | −12% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
Why two Tuscaloosa quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
What local crews earn in Tuscaloosa
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tuscaloosa the blend is 0.79.
Sheet metal workers (47-2211), 40% of the weighting: a median of $23.14 an hour, 22% below the US median of $29.71. The middle half of them earn between $22.27 and $31.52 an hour. About 30 work in the metro. That is 2.8 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the Tuscaloosa metro, so we used the Alabama statewide median: $21.96 an hour against $26.65 for the US. The middle half of them earn between $20.36 and $25.64 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $17.53 an hour, which is 23% below the national $22.66. The middle half of them earn between $14.59 and $20.69 an hour. BLS counts 1,110 of them working in the area, 102.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $10. That is a swing of roughly 0.5% to 4.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tuscaloosa has 108,460 jobs in total (BLS, May 2025), ranking 192nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.27 | $23.14 | $31.52 | $29.71 | 0.78 | metro |
| Roofers (47-2181) | 30% | $20.36 | $21.96 | $25.64 | $26.65 | 0.82 | state |
| Construction laborers (47-2061) | 30% | $14.59 | $17.53 | $20.69 | $22.66 | 0.77 | metro |
| Blended | 100% | 0.79 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,900 to $3,000 for Tuscaloosa, AL is attached.
Detailed gutters report for Tuscaloosa, AL, $9
The report lays out the gutters numbers for Tuscaloosa, AL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Tuscaloosa: your questions
+How much does it cost to install gutters in Tuscaloosa?
For 160 linear ft, expect $1,100 to $3,800 in the Tuscaloosa area. A standard-spec job lands at $1,900 to $3,000. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Tuscaloosa?
About $7 to $22.50 per linear ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Tuscaloosa or Birmingham?
Birmingham is 60 miles away. The midpoint for 160 linear ft there is $2,450, which is 1% more than Tuscaloosa ($2,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tuscaloosa?
About 34% at the midpoint, or $820 out of $2,450. Materials are 63% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Tuscaloosa?
$1,100 to $3,800. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Tuscaloosa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Tuscaloosa area (our national range of $0 to $200 scaled by the local price level).
+Is Tuscaloosa expensive for gutters compared with the rest of Alabama?
Tuscaloosa is 0% above the Alabama statewide estimate ($2,450 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do sheet metal workers earn in Tuscaloosa?
The BLS median is $23.14 an hour in the Tuscaloosa area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.27 to $31.52.
+What do basic and premium gutters work cost in Tuscaloosa?
For 160 linear ft, basic work runs $1,100 to $2,200 and premium work $2,700 to $3,800. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Tuscaloosa?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Tuscaloosa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.