Gutters cost in Crestview, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,150 – $3,900
- Per linear ft
- $7.30 – $23
- before permit
- Versus US midpoint
- −7%
- US $2,750
- Rank of 300 metros
- #209
- 1 = most expensive
Crestview homeowners pay roughly $1,150 to $3,900 to install gutters at 160 linear ft, or $7.30 to $23 per linear ft (permit not included). Against the US midpoint, Crestview is 7% lower. Sheet metal workers earn a median of $23.89 an hour in the Crestview area, 20% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Crestview, FL, standard level
$2,000 to $3,100
About $12 to $18.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $760 | $1,050 |
| Permits and fees | $60 | $140 |
| Total | $2,000 | $3,100 |
Cost breakdown for 160 linear ft in Crestview, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 61% |
| Labor | $550 | $900 | $1,250 | 35% |
| Permits and fees | $0 | $95 | $190 | 4% |
| Total | $1,150 | $2,550 | $3,900 | 100% |
What is behind the Crestview number
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Crestview wages are 0.86 times the national level. Labor makes up about 35% of the midpoint estimate (38% at national prices).
On the materials line, the BEA goods price index for the Crestview metro is 96.2 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (97.0) and land at $0 to $190.
Why two Crestview quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Cost by quality level and size in Crestview
Three bands are cut from the same cited range and localized for Crestview wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,150 to $2,250
Vinyl or sectional aluminum, single story
Standard
$2,000 to $3,100
Seamless aluminum K-style, standard downspouts
Premium
$2,800 to $3,900
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $880 – $1,700 | $1,500 – $2,350 | $2,150 – $3,000 |
| average house (160 linear ft) | $1,150 – $2,250 | $2,000 – $3,100 | $2,800 – $3,900 |
| large house (240 linear ft) | $1,750 – $3,350 | $2,950 – $4,550 | $4,150 – $5,750 |
When to schedule gutters in Crestview
We use NOAA's 1991-2020 climate normals for Crestview Bob Sikes Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Crestview (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Crestview gets about 64 inches of precipitation in a normal year. The wettest months are June, July and August (7.9 inches in July). Inside the workable window, May and October are the driest, at 4.1 and 4.1 inches. The station averages about 98 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 39 | 5.7 | Workable |
| Feb | 67 | 41 | 4.6 | Workable |
| Mar | 73 | 47 | 5.7 | Workable |
| Apr | 79 | 53 | 4.9 | Workable |
| May | 87 | 61 | 4.1 | Workable |
| Jun | 91 | 69 | 6.0 | Hot |
| Jul | 92 | 71 | 7.9 | Hot |
| Aug | 92 | 71 | 6.4 | Hot |
| Sep | 89 | 67 | 5.1 | Workable |
| Oct | 81 | 56 | 4.1 | Workable |
| Nov | 72 | 45 | 4.3 | Workable |
| Dec | 65 | 41 | 4.9 | Workable |
Is Crestview cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,400 to $2,550 across Crestview and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Crestview, FLthis page | $1,150 – $3,900 | $2,550 | |
| Pensacola, FL50 miles | $1,150 – $3,850 | $2,500 | −1% |
| Panama City, FL50 miles | $1,150 – $3,850 | $2,500 | −1% |
| Dothan, AL70 miles | $1,100 – $3,700 | $2,400 | −5% |
| Daphne, AL85 miles | $1,150 – $3,800 | $2,500 | −2% |
| Mobile, AL110 miles | $1,100 – $3,800 | $2,450 | −3% |
| Florida (statewide) | $1,200 – $3,950 | $2,550 | +1% |
| United States | $1,300 – $4,200 | $2,750 | +8% |
Across 300 US metros, Crestview comes in at #209 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Crestview is 1% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,250 – $4,150 | $2,700 | +6% |
| Tampa, FL | 1,447,120 jobs | $1,150 – $3,900 | $2,500 | −1% |
| Orlando, FL | 1,411,730 jobs | $1,150 – $3,850 | $2,500 | −1% |
| Jacksonville, FL | 765,930 jobs | $1,150 – $3,900 | $2,550 | level |
| North Port, FL | 339,940 jobs | $1,150 – $3,900 | $2,550 | +1% |
| Cape Coral, FL | 304,790 jobs | $1,150 – $3,900 | $2,550 | level |
Cities with a workforce like Crestview's
Big cities and small ones price differently, so here is Crestview against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Norwich, CT | 126,450 jobs | $1,400 – $4,400 | $2,900 | +14% |
| Duluth, MN | 124,710 jobs | $1,450 – $4,550 | $3,000 | +19% |
| Elkhart, IN | 127,730 jobs | $1,250 – $4,050 | $2,650 | +5% |
| Appleton, WI | 124,230 jobs | $1,400 – $4,350 | $2,900 | +14% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Crestview is 0.86 times the national level.
For sheet metal workers (47-2211, weighted 40%) the local median is $23.89 an hour, which is 20% below the national $29.71. The middle half of them earn between $22.85 and $27.88 an hour. BLS counts 110 of them working in the area, 8.8 for every 10,000 jobs (US: 7.7), so the local bench is about average.
For roofers (47-2181, weighted 30%) the local median is $22.65 an hour, which is 15% below the national $26.65. The middle half of them earn between $21.81 and $27.84 an hour. BLS counts 160 of them working in the area, 12.8 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $21.72 an hour, 4% below the US median of $22.66. The middle half of them earn between $18.08 and $23.06 an hour. About 1,000 work in the metro. That is 80.0 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($27.88 an hour) instead of the median, the labor line grows by about $55. At the 25th percentile ($22.85) it shrinks by about $15. The total moves by 2.2% or 0.6%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 125,050 jobs in the Crestview-Fort Walton Beach-Destin area. That makes it the 172nd largest of the 300 metros we cover, with 0.08% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.85 | $23.89 | $27.88 | $29.71 | 0.80 | metro |
| Roofers (47-2181) | 30% | $21.81 | $22.65 | $27.84 | $26.65 | 0.85 | metro |
| Construction laborers (47-2061) | 30% | $18.08 | $21.72 | $23.06 | $22.66 | 0.96 | metro |
| Blended | 100% | 0.86 | |||||
What nearby projects cost in Crestview
Because every project leans on different trades, Crestview's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −4% and metal roof −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,450 – $11,400 | −10% |
| Metal roof | 2,000 sq ft of roof | $8,900 – $29,500 | −10% |
| Vinyl siding | 2,100 sq ft of wall | $7,600 – $22,900 | −9% |
| French drain | 60 linear ft | $560 – $1,950 | −6% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,100 for Crestview, FL is attached.
Take this estimate with you: PDF report, $9
The report lays out the gutters numbers for Crestview, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Crestview: your questions
+How much does it cost to install gutters in Crestview?
For 160 linear ft, expect $1,150 to $3,900 in the Crestview area. A standard-spec job lands at $2,000 to $3,100. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Crestview?
About $7.30 to $23 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Crestview or Pensacola?
Pensacola is 50 miles away. The midpoint for 160 linear ft there is $2,500, which is 1% less than Crestview ($2,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Crestview?
About 35% at the midpoint, or $900 out of $2,550. Materials are 61% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Crestview?
$1,150 to $3,900. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Crestview?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Crestview area (our national range of $0 to $200 scaled by the local price level).
+Is Crestview expensive for gutters compared with the rest of Florida?
Crestview is 1% below the Florida statewide estimate ($2,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do sheet metal workers earn in Crestview?
The BLS median is $23.89 an hour in the Crestview area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.85 to $27.88.
+What do basic and premium gutters work cost in Crestview?
For 160 linear ft, basic work runs $1,150 to $2,250 and premium work $2,800 to $3,900. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Crestview?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Crestview
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.