Skip to content
CostLocal

Gravel driveway cost in Utah

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (1,000 sq ft)
$2,450 – $10,000
Per sq ft
$2.45 – $9.85
before permit
Versus US midpoint
−2%
US $6,350
Metros covered
5

Across Utah, a gravel driveway costs about $2,450 to $10,000 for 1,000 sq ft. Statewide, that midpoint is 2% below the US figure of $6,350. Construction laborers earn a median $22.38 an hour in Utah (US: $22.66).

Inside Utah, the metros we cover range from $6,150 (Logan) to $6,300 (Salt Lake City) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your gravel driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Excavated base plus top course, fabric, light grading

Add-ons

Estimated cost for 1,000 sq ft in Utah (statewide), standard level

$4,750 to $7,750

About $4.65 to $7.60 per sq ft before permits. Labor is about 51% of the bill.

Cost breakdown
PartLowHigh
Materials$2,250$3,700
Labor$2,400$3,900
Permits and fees$60$140
Total$4,750$7,750
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Utah

Part of the jobLowMidpointHighShare
Materials$1,150$3,000$4,80048%
Labor$1,300$3,150$5,00051%
Permits and fees$0$100$2002%
Total$2,450$6,250$10,000100%

How Utah compares with nearby states

Utah ranks 29 of 51 (the 50 states plus DC) for gravel driveway, where 1 is the most expensive. The costliest is Hawaii at $9,200 and the cheapest Arkansas at $5,400, both for 1,000 sq ft at the midpoint. Utah sits at $6,250. The five states closest by workforce center are listed below.

States near Utah, same project and size
StateDistanceRangeMidpointvs. here
Idaho280 miles away$2,450 – $10,100$6,250level
Nevada290 miles away$2,600 – $10,600$6,600+6%
Montana400 miles away$2,500 – $10,200$6,350+2%
Colorado410 miles away$2,550 – $10,300$6,400+3%
Wyoming420 miles away$2,450 – $10,000$6,250level

Related projects, priced for Utah

The table prices neighboring jobs at their usual sizes using statewide Utah wages and prices. Against national midpoints, sod installation comes out highest (level) and asphalt driveway lowest (−3%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$2,950 – $7,150−3%
Concrete driveway600 sq ft$3,550 – $8,950−3%
French drain60 linear ft$590 – $2,100−1%
Sod installation1,500 sq ft$1,500 – $3,300level
Concrete slab400 sq ft$2,400 – $5,050−3%
Paver patio300 sq ft$2,950 – $5,350−2%

Utah seasons and gravel driveway

Season matters for gravel driveway. For each Utah metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for digging and ground work.

Salt Lake City has the longest comfortable season of the metros we cover in Utah at 7 months (March through June and September through November); St. George has the shortest at 5 (March through May and October through November). Rainfall runs from 9 inches a year in St. George to 17 inches in Provo.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Salt Lake City2494167: March through June and September through November
Provo2495176: March through June and September through October
Ogden2191167: March through June and August through October
St. George2810295: March through May and October through November
Logan1489177: April through October

Quality levels and sizes in Utah

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Utah wages and prices. The grid prices the same bands at 4 common sizes.

Basic

$2,450 to $5,500

Crusher-run spread and compacted on firm ground

Standard

$4,750 to $7,750

Excavated base plus top course, fabric, light grading

Premium

$7,000 to $10,000

Deep multi-layer build, edging, culvert or drainage

Cost by size and quality level
SizeBasicStandardPremium
single car (500 sq ft)$1,250 – $2,800$2,400 – $3,950$3,550 – $5,100
two car (1,000 sq ft)$2,450 – $5,500$4,750 – $7,750$7,000 – $10,000
100 ft x 10 ft (1,000 sq ft)$2,450 – $5,500$4,750 – $7,750$7,000 – $10,000
long rural (2,000 sq ft)$4,900 – $10,900$9,400 – $15,400$13,900 – $19,900

Optional extras in Utah

Extras are quoted nationally and then scaled to Utah by the average of the local wage index (1.00) and goods index (0.96), a factor of 0.98. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add edging (approx. 1 ft per 10 sq ft)$490 – $1,750

Gravel driveway: what moves the price in Utah

  • Depth and layers

    A proper driveway is a 4-inch base plus a 2-inch top course. Each extra inch of stone adds weight in tons and money.

  • Labor share

    HomeGuide puts labor at about 50% of a gravel driveway's total cost, so a longer or harder-to-reach site moves the price more than the stone does.

  • Grading and edging

    Grading runs $1-$3 per sq ft. Edging to keep the stone in is $5-$18 per linear foot.

  • Stone is sold by weight

    Stone is priced by the ton, so every extra inch of depth or foot of width adds loads of delivery.

  • Permit

    A driveway permit is typically $50-$200 where one is needed for a new curb cut or connection; plenty of rural counties require none.

Wages behind the Utah number

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 2 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.00 for Utah.

Construction laborers (47-2061), 50% of the weighting: a median of $22.38 an hour, in line with the US median of $22.66. The middle half of them earn between $18.63 and $26.56 an hour. About 20,950 work in the state. That is 120.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 50%) the local median is $29.20 an hour, which is in line with the national $28.78. The middle half of them earn between $24.91 and $31.46 an hour. BLS counts 7,880 of them working in the state, 45.4 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

A crew paid at the 75th percentile for construction laborers ($26.56 an hour) would add about $290 to the statewide midpoint; one at the 25th percentile ($18.63) would take off about $260. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 1,735,590 jobs across Utah (May 2025), which is 1.1% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$18.63$22.38$26.56$22.660.99state
Operating engineers and other construction equipment operators (47-2073)50%$24.91$29.20$31.46$28.781.01state
Blended100%1.00

Gravel driveway cost by metro in Utah

1 of the 5 metros sit above the statewide midpoint of $6,250, and the top-to-bottom gap is 3%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (1,000 sq ft)Midpointvs. state
Salt Lake City, UT$2,500 – $10,100$6,300+1%
Ogden, UT$2,450 – $10,000$6,250level
Provo, UT$2,450 – $10,000$6,200level
St. George, UT$2,400 – $9,850$6,150−2%
Logan, UT$2,400 – $9,850$6,150−2%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,750 to $7,750 for Utah is attached.

A detailed PDF report of this estimate, $9

The report lays out the gravel driveway numbers for Utah line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Gravel driveway in Utah: your questions

+How much does it cost to install a gravel driveway in Utah?

$2,450 to $10,000 for 1,000 sq ft, using statewide wages and prices. Metro areas inside Utah can sit above or below that.

+Which city in Utah is cheapest for gravel driveway?

Logan at about $6,150 (midpoint, 1,000 sq ft). The priciest is Salt Lake City at $6,300.

+Is gravel driveway cheaper in Utah than the US average?

It is 2% cheaper: $6,250 against $6,350 for 1,000 sq ft at the midpoint.

+What share of the price is labor in Utah?

About 51% ($3,150). Materials are 48%. Statewide labor for this job is weighted 1.00x the national wage level.

+What do construction laborers earn in Utah?

The BLS statewide median is $22.38 an hour, against $22.66 for the US. The 25th to 75th percentile range is $18.63 to $26.56.

+Where does Utah rank for gravel driveway costs?

29th most expensive of 51 (the 50 states plus DC) at the midpoint, $6,250 for 1,000 sq ft. Rank 1 is the costliest.

+What do basic and premium gravel driveway work cost in Utah?

For 1,000 sq ft, basic work runs $2,450 to $5,500 and premium work $7,000 to $10,000. Basic means: crusher-run spread and compacted on firm ground. Premium means: deep multi-layer build, edging, culvert or drainage.

+Does the season matter for gravel driveway in Utah?

Yes where winters or summers are hard. Of the Utah metros we cover, Salt Lake City has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add edging" add in Utah?

$490 to $1,750 for 1,000 sq ft, from a national range scaled by the statewide wage and goods indexes.

Gravel driveway by city in Utah

Gravel driveway: all pricesUtah cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Installed range spans a basic spread-and-compact job ($2.50/sq ft low, CalculateGravel) to a full build with excavation ($10/sq ft high, HomeGuide). Materials low end is DIY stone ($1.20/sq ft, CalculateGravel); high end is half of HomeGuide's $10 because it says labor is about 50% of the project.