Skip to content
CostLocal

French drain cost in Utah

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (60 linear ft)
$590 – $2,100
Per linear ft
$9.90 – $34.50
before permit
Versus US midpoint
−1%
US $1,350
Metros covered
5

Across Utah, a French drain costs about $590 to $2,100 for 60 linear ft. Statewide, that midpoint is 1% below the US figure of $1,350. Construction laborers earn a median $22.38 an hour in Utah (US: $22.66).

Inside Utah, the metros we cover range from $1,300 (St. George) to $1,350 (Salt Lake City) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your french drain cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard drain with fabric, gravel and a pop-up outlet

Estimated cost for 60 linear ft in Utah (statewide), standard level

$1,050 to $1,650

About $17.50 to $27 per linear ft before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$490$760
Labor$550$870
Permits and fees$0$0
Total$1,050$1,650
Save and get a PDF report

Cost breakdown for 60 linear ft in Utah

Part of the jobLowMidpointHighShare
Materials$280$620$97047%
Labor$320$710$1,10053%
Permits and fees$0$0$00%
Total$590$1,350$2,100100%

When Utah weather lets you install

Season matters for French drain. For each Utah metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for digging and ground work.

Salt Lake City has the longest comfortable season of the metros we cover in Utah at 7 months (March through June and September through November); St. George has the shortest at 5 (March through May and October through November). Rainfall runs from 9 inches a year in St. George to 17 inches in Provo.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Salt Lake City2494167: March through June and September through November
Provo2495176: March through June and September through October
Ogden2191167: March through June and August through October
St. George2810295: March through May and October through November
Logan1489177: April through October

Quality levels and sizes in Utah

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Utah wages and prices. The grid prices the same bands at 3 common sizes.

Basic

$590 to $1,200

Shallow yard drain, easy digging

Standard

$1,050 to $1,650

Standard drain with fabric, gravel and a pop-up outlet

Premium

$1,500 to $2,100

Deep or long drain, hard soil, dry well or sump discharge

Cost by size and quality level
SizeBasicStandardPremium
short run (30 linear ft)$300 – $590$520 – $820$740 – $1,050
side yard (60 linear ft)$590 – $1,200$1,050 – $1,650$1,500 – $2,100
long run (120 linear ft)$1,200 – $2,350$2,100 – $3,250$2,950 – $4,150

Related projects, priced for Utah

The table prices neighboring jobs at their usual sizes using statewide Utah wages and prices. Against national midpoints, sod installation comes out highest (level) and concrete slab lowest (−3%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Retaining wall200 sq ft of wall face$6,900 – $13,100−3%
Gravel driveway1,000 sq ft$2,450 – $10,000−2%
Sod installation1,500 sq ft$1,500 – $3,300level
Concrete slab400 sq ft$2,400 – $5,050−3%
Sprinkler system4,000 sq ft of lawn$3,900 – $9,750−2%
Inground pool450 sq ft$35,300 – $110,500−2%

Which Utah city is cheapest for French drain?

1 of the 5 metros sit above the statewide midpoint of $1,350, and the top-to-bottom gap is 2%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (60 linear ft)Midpointvs. state
Salt Lake City, UT$600 – $2,100$1,350+1%
Provo, UT$590 – $2,050$1,350−1%
Ogden, UT$590 – $2,050$1,350−1%
Logan, UT$590 – $2,050$1,300−1%
St. George, UT$590 – $2,050$1,300−1%

French drain: what moves the price in Utah

  • Exterior versus interior

    A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).

  • Where the water goes

    A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.

  • Depth and soil

    Rocky or clay soil and long trenches raise excavation time.

  • Crawl space drains

    A crawl space French drain is $2,000-$8,000 installed.

Utah versus the states around it

Utah ranks 30 of 51 (the 50 states plus DC) for French drain, where 1 is the most expensive. The costliest is Hawaii at $1,850 and the cheapest Arkansas at $1,150, both for 60 linear ft at the midpoint. Utah sits at $1,350. The five states closest by workforce center are listed below.

States near Utah, same project and size
StateDistanceRangeMidpointvs. here
Idaho280 miles away$600 – $2,100$1,350+2%
Nevada290 miles away$630 – $2,200$1,400+7%
Montana400 miles away$600 – $2,100$1,350+1%
Colorado410 miles away$620 – $2,150$1,400+4%
Wyoming420 miles away$590 – $2,050$1,300−1%

Utah labor market for French drain

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.01 for Utah.

Construction laborers (47-2061), 50% of the weighting: a median of $22.38 an hour, in line with the US median of $22.66. The middle half of them earn between $18.63 and $26.56 an hour. About 20,950 work in the state. That is 120.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $29.20 an hour, which is in line with the national $28.78. The middle half of them earn between $24.91 and $31.46 an hour. BLS counts 7,880 of them working in the state, 45.4 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

Pipelayers (47-2151), 20% of the weighting: a median of $25.00 an hour, 6% above the US median of $23.56. The middle half of them earn between $23.86 and $27.51 an hour. About 530 work in the state. That is 3.1 per 10,000 jobs, compared with 2.1 nationally, which suggests plenty of local crews to bid.

A crew paid at the 75th percentile for construction laborers ($26.56 an hour) would add about $65 to the statewide midpoint; one at the 25th percentile ($18.63) would take off about $60. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 1,735,590 jobs across Utah (May 2025), which is 1.1% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$18.63$22.38$26.56$22.660.99state
Operating engineers and other construction equipment operators (47-2073)30%$24.91$29.20$31.46$28.781.01state
Pipelayers (47-2151)20%$23.86$25.00$27.51$23.561.06state
Blended100%1.01

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,050 to $1,650 for Utah is attached.

A detailed PDF report of this estimate, $9

The report lays out the french drain numbers for Utah line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

French drain in Utah: your questions

+How much does it cost to install a French drain in Utah?

$590 to $2,100 for 60 linear ft, using statewide wages and prices. Metro areas inside Utah can sit above or below that.

+Which city in Utah is cheapest for French drain?

St. George at about $1,300 (midpoint, 60 linear ft). The priciest is Salt Lake City at $1,350.

+Is French drain cheaper in Utah than the US average?

It is 1% cheaper: $1,350 against $1,350 for 60 linear ft at the midpoint.

+What share of the price is labor in Utah?

About 53% ($710). Materials are 47%. Statewide labor for this job is weighted 1.01x the national wage level.

+What do construction laborers earn in Utah?

The BLS statewide median is $22.38 an hour, against $22.66 for the US. The 25th to 75th percentile range is $18.63 to $26.56.

+Where does Utah rank for French drain costs?

30th most expensive of 51 (the 50 states plus DC) at the midpoint, $1,350 for 60 linear ft. Rank 1 is the costliest.

+What do basic and premium French drain work cost in Utah?

For 60 linear ft, basic work runs $590 to $1,200 and premium work $1,500 to $2,100. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.

+Does the season matter for French drain in Utah?

Yes where winters or summers are hard. Of the Utah metros we cover, Salt Lake City has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

French drain by city in Utah

French drain: all pricesUtah cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.