Concrete slab cost in Canton, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (400 sq ft)
- $2,450 – $5,150
- Per sq ft
- $6.05 – $12
- before permit
- Versus US midpoint
- Level
- US $3,850
- Rank of 300 metros
- #125
- 1 = most expensive
Canton homeowners pay roughly $2,450 to $5,150 to pour a concrete slab at 400 sq ft, or $6.05 to $12 per sq ft (permit not included). Against the US midpoint, Canton is almost level. Cement masons and concrete finishers earn a median of $30.08 an hour in the Canton area, 10% above the US median of $27.41.
Estimate your concrete slab cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 400 sq ft in Canton, OH, standard level
$3,250 to $4,350
About $7.85 to $10 per sq ft before permits. Labor is about 46% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,550 | $2,150 |
| Labor | $1,550 | $1,900 |
| Permits and fees | $140 | $260 |
| Total | $3,250 | $4,350 |
Cost breakdown for 400 sq ft in Canton, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,100 | $1,850 | $2,600 | 49% |
| Labor | $1,300 | $1,750 | $2,150 | 46% |
| Permits and fees | $45 | $200 | $360 | 5% |
| Total | $2,450 | $3,800 | $5,150 | 100% |
What is behind the Canton number
The wage side of the estimate leans on cement masons and concrete finishers, who do 50% of the hours on a typical job. Their local median is $30.08 an hour. Add the other trades involved and the blended wage index for Canton is 1.08 (US = 1.00), which puts labor at 46% of the total.
On the materials line, the BEA goods price index for the Canton metro is 93.6 (US = 100). The midpoint materials bill for 400 sq ft comes to $1,850, compared with $2,000 at national prices. Permit and inspection fees are scaled by the broader index (89.4) and land at $45 to $360.
Extras that change the Canton total
Extras are quoted nationally and then scaled to Canton by the average of the local wage index (1.08) and goods index (0.94), a factor of 1.01. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $400 – $1,200 |
| Remove old concrete first | $810 – $2,400 |
Specs and site conditions that change a Canton bid
Finish
A broom finish is the baseline. Stamped, stained, or exposed-aggregate finishes are priced as add-ons on top of the slab.
Thickness and mix
A 4-inch slab uses about 1.23 cubic yards of concrete per 100 sq ft; a 6-inch slab uses about 1.85. Stepping up from a 3,000 PSI to a 4,000-4,500 PSI mix adds $10-$40 per cubic yard (Estimators.us).
Base and reinforcement
A compacted gravel base, vapor barrier, and wire mesh or rebar are priced separately by some contractors and bundled by others. Ask which one your quote does.
When to schedule concrete slab in Canton
We use NOAA's 1991-2020 climate normals for Akron Canton Rgnl Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
May through October is the stretch where pouring concrete runs into the fewest weather problems in Canton (6 of 12 months). January, February, March, April, November and December have an average overnight low of 40°F or below.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Canton gets about 42 inches of precipitation in a normal year, including roughly 47 inches of snow. The wettest months are May, June and July (4.4 inches in June). Inside the workable window, September and October are the driest, at 3.5 and 3.3 inches. The station averages about 11 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 20 | 2.9 | Cold |
| Feb | 39 | 22 | 2.4 | Cold |
| Mar | 48 | 29 | 3.2 | Cold |
| Apr | 62 | 40 | 3.9 | Cold |
| May | 72 | 50 | 4.1 | Workable |
| Jun | 80 | 59 | 4.4 | Workable |
| Jul | 84 | 63 | 4.1 | Workable |
| Aug | 83 | 62 | 3.6 | Workable |
| Sep | 76 | 55 | 3.5 | Workable |
| Oct | 63 | 44 | 3.3 | Workable |
| Nov | 51 | 34 | 3.1 | Cold |
| Dec | 40 | 26 | 2.9 | Cold |
What nearby projects cost in Canton
Because every project leans on different trades, Canton's wage level does not move all prices equally. Against the US midpoint, concrete driveway runs +4% and detached garage −2%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,750 – $9,600 | +4% |
| Concrete patio | 300 sq ft | $1,250 – $4,050 | +1% |
| Detached garage | 576 sq ft | $28,300 – $56,700 | −2% |
| Stamped concrete | 400 sq ft | $3,250 – $8,100 | +1% |
| Asphalt driveway | 600 sq ft | $3,000 – $7,450 | level |
| Gravel driveway | 1,000 sq ft | $2,500 – $10,200 | level |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Canton is 1.08 times the national level.
For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $30.08 an hour, which is 10% above the national $27.41. The middle half of them earn between $22.34 and $33.99 an hour. BLS counts 300 of them working in the area, 18.4 for every 10,000 jobs (US: 13.3), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $25.85 an hour, 14% above the US median of $22.66. The middle half of them earn between $21.85 and $35.80 an hour. About 1,100 work in the metro. That is 67.5 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $28.85 an hour, which is in line with the national $28.78. The middle half of them earn between $24.38 and $43.07 an hour. BLS counts 530 of them working in the area, 32.5 for every 10,000 jobs (US: 30.7), so the local bench is about average.
For carpenters (47-2031, weighted 10%) the local median is $27.18 an hour, which is 7% below the national $29.12. The middle half of them earn between $21.33 and $34.27 an hour. BLS counts 380 of them working in the area, 23.3 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($33.99 an hour) instead of the median, the labor line grows by about $110. At the 25th percentile ($22.34) it shrinks by about $230. The total moves by 3.0% or 5.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 163,080 jobs in the Canton-Massillon area. That makes it the 145th largest of the 300 metros we cover, with 0.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $22.34 | $30.08 | $33.99 | $27.41 | 1.10 | metro |
| Construction laborers (47-2061) | 30% | $21.85 | $25.85 | $35.80 | $22.66 | 1.14 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $24.38 | $28.85 | $43.07 | $28.78 | 1.00 | metro |
| Carpenters (47-2031) | 10% | $21.33 | $27.18 | $34.27 | $29.12 | 0.93 | metro |
| Blended | 100% | 1.08 | |||||
Cost by quality level and size in Canton
Three bands are cut from the same cited range and localized for Canton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 5 common sizes.
Basic
$2,450 to $3,550
4-inch broom-finish slab, light mesh, easy truck access
Standard
$3,250 to $4,350
4-5 inch slab with rebar or heavier mesh and standard base prep
Premium
$4,100 to $5,150
6-inch slab, heavy reinforcement, thick base, pump truck or tight access
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x10 pad (100 sq ft) | $650 – $1,000 | $920 – $1,300 | $1,200 – $1,550 |
| 12x12 (144 sq ft) | $920 – $1,400 | $1,250 – $1,750 | $1,600 – $2,100 |
| 20x20 (400 sq ft) | $2,450 – $3,550 | $3,250 – $4,350 | $4,100 – $5,150 |
| 24x24 garage floor (576 sq ft) | $3,550 – $5,000 | $4,650 – $6,150 | $5,750 – $7,250 |
| 30x40 foundation (1,200 sq ft) | $7,300 – $10,300 | $9,550 – $12,500 | $11,800 – $14,700 |
Is Canton cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $3,750 to $3,950 across Canton and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Canton, OHthis page | $2,450 – $5,150 | $3,800 | |
| Akron, OH30 miles | $2,550 – $5,300 | $3,900 | +3% |
| Youngstown, OH40 miles | $2,400 – $5,050 | $3,750 | −2% |
| Wheeling, WV55 miles | $2,450 – $5,150 | $3,800 | level |
| Cleveland, OH65 miles | $2,550 – $5,300 | $3,950 | +4% |
| Pittsburgh, PA75 miles | $2,550 – $5,350 | $3,950 | +4% |
| Ohio (statewide) | $2,500 – $5,250 | $3,850 | +2% |
| United States | $2,450 – $5,200 | $3,850 | level |
Across 300 US metros, Canton comes in at #125 from the top. The priciest is Kahului, HI at $5,300; the cheapest is McAllen, TX at $3,200 (midpoints, 400 sq ft). Statewide, Canton is 2% below the Ohio figure.
Other Ohio metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $2,600 – $5,400 | $4,000 | +5% |
| Cincinnati, OH | 1,101,030 jobs | $2,500 – $5,250 | $3,850 | +2% |
| Cleveland, OH | 1,031,130 jobs | $2,550 – $5,300 | $3,950 | +4% |
| Dayton, OH | 372,660 jobs | $2,500 – $5,150 | $3,800 | level |
| Akron, OH | 319,560 jobs | $2,550 – $5,300 | $3,900 | +3% |
| Toledo, OH | 291,530 jobs | $2,450 – $5,150 | $3,800 | level |
Cities with a workforce like Canton's
Big cities and small ones price differently, so here is Canton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Beaumont, TX | 163,220 jobs | $2,250 – $4,800 | $3,500 | −8% |
| Shreveport, LA | 162,750 jobs | $2,150 – $4,600 | $3,400 | −11% |
| Spartanburg, SC | 165,150 jobs | $2,250 – $4,800 | $3,500 | −8% |
| Waterbury, CT | 160,710 jobs | $2,550 – $5,350 | $3,950 | +4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,250 to $4,350 for Canton, OH is attached.
A detailed PDF report of this estimate, $9
The report lays out the concrete slab numbers for Canton, OH line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete slab in Canton: your questions
+How much does it cost to pour a concrete slab in Canton?
For 400 sq ft, expect $2,450 to $5,150 in the Canton area. A standard-spec job lands at $3,250 to $4,350. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete slab in Canton?
About $6.05 to $12 per sq ft for materials and labor, plus $45 to $360 for the permit if one is needed. The US range is $6 to $12.
+Is concrete slab cheaper in Canton or Akron?
Akron is 30 miles away. The midpoint for 400 sq ft there is $3,900, which is 3% more than Canton ($3,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Canton?
About 46% at the midpoint, or $1,750 out of $3,800. Materials are 49% and permits 5%. Nationally, labor is 42%.
+What would 20x20 (400 sq ft) cost in Canton?
$2,450 to $5,150. Pick a different size in the estimator above to get your own number.
+Does concrete slab need a permit in Canton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $360 for fees in the Canton area (our national range of $50 to $400 scaled by the local price level).
+Is Canton expensive for concrete slab compared with the rest of Ohio?
Canton is 2% below the Ohio statewide estimate ($3,850 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do cement masons and concrete finishers earn in Canton?
The BLS median is $30.08 an hour in the Canton area, compared with $27.41 nationally. The 25th to 75th percentile range is $22.34 to $33.99.
+What do basic and premium concrete slab work cost in Canton?
For 400 sq ft, basic work runs $2,450 to $3,550 and premium work $4,100 to $5,150. Basic means: 4-inch broom-finish slab, light mesh, easy truck access. Premium means: 6-inch slab, heavy reinforcement, thick base, pump truck or tight access.
+When is the best time to pour a concrete slab in Canton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through October. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add rebar reinforcement" add in Canton?
$400 to $1,200 for 400 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete slab near Canton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Slab Cost? (2026) (accessed November 4, 2026)
- Estimators.us: Concrete Slab Cost in 2026 | $6-$12/Sq Ft Guide (accessed November 4, 2026)
- HomeGuide: How Much Does a Concrete Patio Cost? (2026) (accessed November 4, 2026)
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020