Skip to content
CostLocal

Concrete slab cost in Kingston, NY

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (400 sq ft)
$2,500 – $5,250
Per sq ft
$6.10 – $12
before permit
Versus US midpoint
+1%
US $3,850
Rank of 300 metros
#101
1 = most expensive

Kingston homeowners pay roughly $2,500 to $5,250 to pour a concrete slab at 400 sq ft, or $6.10 to $12 per sq ft (permit not included). Against the US midpoint, Kingston is almost level. Cement masons and concrete finishers earn a median of $27.37 an hour in the Kingston area, 0% below the US median of $27.41.

Estimate your concrete slab cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

4-5 inch slab with rebar or heavier mesh and standard base prep

Add-ons

Estimated cost for 400 sq ft in Kingston, NY, standard level

$3,300 to $4,450

About $7.90 to $10.50 per sq ft before permits. Labor is about 43% of the bill.

Cost breakdown
PartLowHigh
Materials$1,650$2,300
Labor$1,500$1,800
Permits and fees$160$300
Total$3,300$4,450
Save and get a PDF report

Cost breakdown for 400 sq ft in Kingston, NY

Part of the jobLowMidpointHighShare
Materials$1,200$2,000$2,80051%
Labor$1,250$1,650$2,05043%
Permits and fees$50$230$4006%
Total$2,500$3,850$5,250100%

What is behind the Kingston number

The wage side of the estimate leans on cement masons and concrete finishers, who do 50% of the hours on a typical job. Their local median is $27.37 an hour. Add the other trades involved and the blended wage index for Kingston is 1.03 (US = 1.00), which puts labor at 43% of the total.

On the materials line, the BEA goods price index for the Kingston metro is 99.7 (US = 100). The midpoint materials bill for 400 sq ft comes to $2,000, compared with $2,000 at national prices. Permit and inspection fees are scaled by the broader index (100.7) and land at $50 to $400.

Add-ons priced for Kingston

Extras are quoted nationally and then scaled to Kingston by the average of the local wage index (1.03) and goods index (1.00), a factor of 1.01. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add rebar reinforcement$410 – $1,200
Remove old concrete first$810 – $2,450

Is Kingston cheap or dear? The local comparison

Same job, same size (400 sq ft), priced for the nearest metros. Poughkeepsie is the priciest of the group at $4,250.

Comparison with nearby areas
AreaRangeMidpointvs. here
Kingston, NYthis page$2,500 – $5,250$3,850
Poughkeepsie, NY30 miles$2,700 – $5,750$4,250+9%
Albany, NY60 miles$2,600 – $5,450$4,000+4%
Pittsfield, MA60 miles$2,550 – $5,300$3,900+1%
Bridgeport, CT65 miles$2,600 – $5,450$4,000+3%
Waterbury, CT70 miles$2,550 – $5,350$3,950+2%
New York (statewide)$2,750 – $5,800$4,250+10%
United States$2,450 – $5,200$3,850−1%

Across 300 US metros, Kingston comes in at #101 from the top. The priciest is Kahului, HI at $5,300; the cheapest is McAllen, TX at $3,200 (midpoints, 400 sq ft). Statewide, Kingston is 9% below the New York figure.

Other New York metros

New York metros compared with Kingston
MetroSizeRangeMidpointvs. here
New York, NY9,492,000 jobs$2,900 – $6,050$4,450+15%
Buffalo, NY534,550 jobs$2,550 – $5,350$3,950+2%
Rochester, NY494,280 jobs$2,550 – $5,300$3,900+1%
Albany, NY449,410 jobs$2,600 – $5,450$4,000+4%
Syracuse, NY300,130 jobs$2,500 – $5,300$3,900+1%
Poughkeepsie, NY268,970 jobs$2,700 – $5,750$4,250+9%

Cities with a workforce like Kingston's

Big cities and small ones price differently, so here is Kingston against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Niles, MI59,970 jobs$2,350 – $4,950$3,650−6%
Altoona, PA58,650 jobs$2,400 – $5,050$3,700−4%
Alexandria, LA60,000 jobs$2,150 – $4,600$3,400−13%
Dubuque, IA58,470 jobs$2,400 – $5,050$3,700−4%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Kingston is 1.03 times the national level.

For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $27.37 an hour, which is in line with the national $27.41. The middle half of them earn between $23.55 and $31.93 an hour. BLS counts 50 of them working in the area, 8.5 for every 10,000 jobs (US: 13.3), so the local bench is thinner than average.

Construction laborers (47-2061), 30% of the weighting: a median of $23.81 an hour, 5% above the US median of $22.66. The middle half of them earn between $20.94 and $31.28 an hour. About 430 work in the metro. That is 72.7 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $33.83 an hour, which is 18% above the national $28.78. The middle half of them earn between $27.79 and $36.54 an hour. BLS counts 150 of them working in the area, 25.4 for every 10,000 jobs (US: 30.7), so the local bench is thinner than average.

For carpenters (47-2031, weighted 10%) the local median is $29.40 an hour, which is in line with the national $29.12. The middle half of them earn between $26.05 and $36.33 an hour. BLS counts 280 of them working in the area, 47.3 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($31.93 an hour) instead of the median, the labor line grows by about $130. At the 25th percentile ($23.55) it shrinks by about $110. The total moves by 3.4% or 2.9%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 59,140 jobs in the Kingston area. That makes it the 290th largest of the 300 metros we cover, with 0.04% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$23.55$27.37$31.93$27.411.00metro
Construction laborers (47-2061)30%$20.94$23.81$31.28$22.661.05metro
Operating engineers and other construction equipment operators (47-2073)10%$27.79$33.83$36.54$28.781.18metro
Carpenters (47-2031)10%$26.05$29.40$36.33$29.121.01metro
Blended100%1.03

What nearby projects cost in Kingston

Because every project leans on different trades, Kingston's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs +5% and stamped concrete +1%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,700 – $9,400+2%
Concrete patio300 sq ft$1,250 – $4,050+2%
Detached garage576 sq ft$29,500 – $59,300+2%
Stamped concrete400 sq ft$3,300 – $8,050+1%
Asphalt driveway600 sq ft$3,200 – $7,850+5%
Gravel driveway1,000 sq ft$2,650 – $10,800+5%

When to schedule concrete slab in Kingston

We use NOAA's 1991-2020 climate normals for Rhinebeck 4Se (5 miles from the city center). These are 30-year monthly averages, not forecasts.

May through September is the stretch where pouring concrete runs into the fewest weather problems in Kingston (5 of 12 months). January, February, March, April, October, November and December have an average overnight low of 40°F or below.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Kingston gets about 51 inches of precipitation in a normal year. The wettest months are August, October and December (5.3 inches in October). Inside the workable window, May and June are the driest, at 3.8 and 4.1 inches. The station averages about 20 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Rhinebeck 4Se (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan37114.0Cold
Feb40123.1Cold
Mar49204.1Cold
Apr62313.9Cold
May73433.8Workable
Jun81524.1Workable
Jul86564.6Workable
Aug84554.9Workable
Sep77474.3Workable
Oct65355.3Cold
Nov53263.6Cold
Dec42174.8Cold

Pick a size, pick a tier: concrete slab pricing in Kingston

Three bands are cut from the same cited range and localized for Kingston wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 5 common sizes.

Basic

$2,500 to $3,600

4-inch broom-finish slab, light mesh, easy truck access

Standard

$3,300 to $4,450

4-5 inch slab with rebar or heavier mesh and standard base prep

Premium

$4,150 to $5,250

6-inch slab, heavy reinforcement, thick base, pump truck or tight access

Cost by size and quality level
SizeBasicStandardPremium
10x10 pad (100 sq ft)$660 – $1,050$950 – $1,350$1,250 – $1,600
12x12 (144 sq ft)$930 – $1,400$1,300 – $1,800$1,650 – $2,150
20x20 (400 sq ft)$2,500 – $3,600$3,300 – $4,450$4,150 – $5,250
24x24 garage floor (576 sq ft)$3,550 – $5,100$4,700 – $6,250$5,850 – $7,400
30x40 foundation (1,200 sq ft)$7,350 – $10,400$9,650 – $12,700$11,900 – $15,000

Concrete slab: what moves the price in Kingston

  • Base and reinforcement

    A compacted gravel base, vapor barrier, and wire mesh or rebar are priced separately by some contractors and bundled by others. Ask which one your quote does.

  • Truck and pump access

    If the mixer truck can't back up to the forms, someone has to wheelbarrow it in or hire a pump. Pump or line-pump hire is typically billed per day.

  • Small-job minimums

    Many crews have a minimum charge, so a 10x10 pad can cost more per square foot than a 20x20 slab.

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,300 to $4,450 for Kingston, NY is attached.

Take this estimate with you: PDF report, $9

The report lays out the concrete slab numbers for Kingston, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete slab in Kingston: your questions

+How much does it cost to pour a concrete slab in Kingston?

For 400 sq ft, expect $2,500 to $5,250 in the Kingston area. A standard-spec job lands at $3,300 to $4,450. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for concrete slab in Kingston?

About $6.10 to $12 per sq ft for materials and labor, plus $50 to $400 for the permit if one is needed. The US range is $6 to $12.

+Is concrete slab cheaper in Kingston or Poughkeepsie?

Poughkeepsie is 30 miles away. The midpoint for 400 sq ft there is $4,250, which is 9% more than Kingston ($3,850). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Kingston?

About 43% at the midpoint, or $1,650 out of $3,850. Materials are 51% and permits 6%. Nationally, labor is 42%.

+What would 20x20 (400 sq ft) cost in Kingston?

$2,500 to $5,250. Pick a different size in the estimator above to get your own number.

+Does concrete slab need a permit in Kingston?

Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $400 for fees in the Kingston area (our national range of $50 to $400 scaled by the local price level).

+Is Kingston expensive for concrete slab compared with the rest of New York?

Kingston is 9% below the New York statewide estimate ($4,250 at the midpoint). We cover 9 metros in New York; see the state page to compare them.

+What do cement masons and concrete finishers earn in Kingston?

The BLS median is $27.37 an hour in the Kingston area, compared with $27.41 nationally. The 25th to 75th percentile range is $23.55 to $31.93.

+What do basic and premium concrete slab work cost in Kingston?

For 400 sq ft, basic work runs $2,500 to $3,600 and premium work $4,150 to $5,250. Basic means: 4-inch broom-finish slab, light mesh, easy truck access. Premium means: 6-inch slab, heavy reinforcement, thick base, pump truck or tight access.

+When is the best time to pour a concrete slab in Kingston?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through September. May and June are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add rebar reinforcement" add in Kingston?

$410 to $1,200 for 400 sq ft, from a national range scaled by the local wage and goods indexes.

Concrete slab near Kingston

Concrete slab: all pricesConcrete slab in New YorkAll projects in KingstonNew York cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.