Concrete patio cost in Deltona, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $1,150 – $3,600
- Per sq ft
- $3.70 – $10.50
- before permit
- Versus US midpoint
- −9%
- US $2,650
- Rank of 300 metros
- #217
- 1 = most expensive
If you want to pour a concrete patio in Deltona, plan on $1,150 to $3,600 for 300 sq ft, all in. Per sq ft, that is $3.70 to $10.50 for materials and labor, with the permit on top. The local midpoint runs 9% lower than the national one. Cement masons and concrete finishers earn a median of $23.08 an hour in the Deltona area, 16% below the US median of $27.41.
Estimate your concrete patio cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Deltona, FL, standard level
$1,900 to $2,900
About $5.80 to $8.65 per sq ft before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $900 | $1,150 |
| Labor | $850 | $1,450 |
| Permits and fees | $150 | $290 |
| Total | $1,900 | $2,900 |
Cost breakdown for 300 sq ft in Deltona, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $720 | $1,000 | $1,300 | 42% |
| Labor | $380 | $1,150 | $1,900 | 48% |
| Permits and fees | $50 | $220 | $400 | 9% |
| Total | $1,150 | $2,400 | $3,600 | 100% |
Where the Deltona price comes from
The wage side of the estimate leans on cement masons and concrete finishers, who do 50% of the hours on a typical job. Their local median is $23.08 an hour. Add the other trades involved and the blended wage index for Deltona is 0.85 (US = 1.00), which puts labor at 48% of the total.
On the materials line, the BEA goods price index for the Deltona metro is 96.2 (US = 100). The midpoint materials bill for 300 sq ft comes to $1,000, compared with $1,050 at national prices. Permit and inspection fees are scaled by the broader index (99.4) and land at $50 to $400.
Climate in Deltona: timing your concrete patio job
We use NOAA's 1991-2020 climate normals for Orlando Sanford Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where pouring concrete runs into the fewest weather problems in Deltona (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Heat matters for concrete as well. With average highs of 90°F or more in June, July, August and September, crews often start early, wet the base and plan for faster set times.
Deltona gets about 50 inches of precipitation in a normal year. The wettest months are June, July and August (8.2 inches in June). Inside the workable window, November and December are the driest, at 1.9 and 2.2 inches. The station averages about 115 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 71 | 50 | 2.4 | Workable |
| Feb | 74 | 52 | 2.3 | Workable |
| Mar | 78 | 56 | 2.9 | Workable |
| Apr | 83 | 61 | 2.4 | Workable |
| May | 89 | 67 | 3.3 | Workable |
| Jun | 91 | 73 | 8.2 | Hot |
| Jul | 93 | 74 | 7.3 | Hot |
| Aug | 93 | 75 | 6.8 | Hot |
| Sep | 90 | 73 | 6.2 | Hot |
| Oct | 85 | 67 | 3.9 | Workable |
| Nov | 78 | 58 | 1.9 | Workable |
| Dec | 73 | 53 | 2.2 | Workable |
Optional extras in Deltona
Extras are quoted nationally and then scaled to Deltona by the average of the local wage index (0.85) and goods index (0.96), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add an acid or water-based stain | $820 – $2,750 |
Related projects, priced for Deltona
Because every project leans on different trades, Deltona's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs −7% and concrete driveway −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
| Stamped concrete | 400 sq ft | $3,000 – $7,250 | −8% |
| Paver patio | 300 sq ft | $2,800 – $5,050 | −7% |
| Wood deck | 300 sq ft | $6,750 – $13,500 | −11% |
| Concrete driveway | 600 sq ft | $3,300 – $8,150 | −11% |
| Asphalt driveway | 600 sq ft | $2,850 – $6,900 | −7% |
Deltona: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Deltona wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,150 to $2,150
Plain gray slab, broom finish, flat yard
Standard
$1,900 to $2,900
Colored or stained, saw-cut joints, minor grading
Premium
$2,650 to $3,600
Exposed aggregate or heavy decorative finish, drainage work
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x10 (100 sq ft) | $420 – $840 | $730 – $1,150 | $1,050 – $1,450 |
| 12x16 (192 sq ft) | $760 – $1,450 | $1,250 – $1,950 | $1,800 – $2,450 |
| 20x20 (400 sq ft) | $1,500 – $2,800 | $2,500 – $3,750 | $3,450 – $4,700 |
Specs and site conditions that change a Deltona bid
Size
Small patios carry fixed costs for forms and mobilization, so the per-square-foot price drops as the patio gets bigger.
Permit
Permits run $50-$400 where required. Many cities don't require one for a small at-grade patio.
Finish
Plain concrete is $4-$12 per sq ft and a broom finish $6-$13; designs with several colors and decorative finishes run up to about $28 (HomeGuide).
How Deltona compares
Of the five closest metros, 3 are cheaper than Deltona. Ocala is the lowest at about $2,300 (midpoint, 300 sq ft), 50 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Deltona, FLthis page | $1,150 – $3,600 | $2,400 | |
| Ocala, FL50 miles | $1,150 – $3,500 | $2,300 | −3% |
| Orlando, FL50 miles | $1,150 – $3,600 | $2,400 | level |
| Palm Bay, FL70 miles | $1,150 – $3,650 | $2,400 | level |
| Jacksonville, FL80 miles | $1,150 – $3,650 | $2,400 | +1% |
| Lakeland, FL90 miles | $1,150 – $3,550 | $2,350 | −2% |
| Florida (statewide) | $1,200 – $3,700 | $2,450 | +2% |
| United States | $1,250 – $4,000 | $2,650 | +10% |
Across 300 US metros, Deltona comes in at #217 from the top. The priciest is Kahului, HI at $3,800; the cheapest is McAllen, TX at $2,100 (midpoints, 300 sq ft). Statewide, Deltona is 2% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,250 – $3,850 | $2,550 | +7% |
| Tampa, FL | 1,447,120 jobs | $1,150 – $3,700 | $2,400 | +1% |
| Orlando, FL | 1,411,730 jobs | $1,150 – $3,600 | $2,400 | level |
| Jacksonville, FL | 765,930 jobs | $1,150 – $3,650 | $2,400 | +1% |
| North Port, FL | 339,940 jobs | $1,150 – $3,700 | $2,450 | +2% |
| Cape Coral, FL | 304,790 jobs | $1,150 – $3,650 | $2,400 | +1% |
Cities with a workforce like Deltona's
Big cities and small ones price differently, so here is Deltona against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Springfield, MO | 223,030 jobs | $1,200 – $3,850 | $2,550 | +6% |
| Ann Arbor, MI | 219,730 jobs | $1,250 – $4,050 | $2,650 | +11% |
| Fort Wayne, IN | 225,520 jobs | $1,250 – $4,050 | $2,650 | +10% |
| Lansing, MI | 217,180 jobs | $1,250 – $4,100 | $2,700 | +12% |
Deltona labor market for concrete patio
Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Deltona is 0.85 times the national level.
For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $23.08 an hour, which is 16% below the national $27.41. The middle half of them earn between $21.21 and $27.43 an hour. BLS counts 330 of them working in the area, 15.0 for every 10,000 jobs (US: 13.3), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $21.02 an hour, 7% below the US median of $22.66. The middle half of them earn between $17.70 and $23.37 an hour. About 2,050 work in the metro. That is 93.3 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For carpenters (47-2031, weighted 10%) the local median is $22.44 an hour, which is 23% below the national $29.12. The middle half of them earn between $17.85 and $27.17 an hour. BLS counts 740 of them working in the area, 33.7 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $22.57 an hour, which is 22% below the national $28.78. The middle half of them earn between $19.01 and $24.52 an hour. BLS counts 730 of them working in the area, 33.2 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($27.43 an hour) instead of the median, the labor line grows by about $110. At the 25th percentile ($21.21) it shrinks by about $45. The total moves by 4.5% or 1.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 219,740 jobs in the Deltona-Daytona Beach-Ormond Beach area. That makes it the 109th largest of the 300 metros we cover, with 0.14% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $21.21 | $23.08 | $27.43 | $27.41 | 0.84 | metro |
| Construction laborers (47-2061) | 30% | $17.70 | $21.02 | $23.37 | $22.66 | 0.93 | metro |
| Carpenters (47-2031) | 10% | $17.85 | $22.44 | $27.17 | $29.12 | 0.77 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $19.01 | $22.57 | $24.52 | $28.78 | 0.78 | metro |
| Blended | 100% | 0.85 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,900 to $2,900 for Deltona, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Deltona, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete patio in Deltona: your questions
+How much does it cost to pour a concrete patio in Deltona?
For 300 sq ft, expect $1,150 to $3,600 in the Deltona area. A standard-spec job lands at $1,900 to $2,900. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete patio in Deltona?
About $3.70 to $10.50 per sq ft for materials and labor, plus $50 to $400 for the permit if one is needed. The US range is $4 to $12.
+Is concrete patio cheaper in Deltona or Ocala?
Ocala is 50 miles away. The midpoint for 300 sq ft there is $2,300, which is 3% less than Deltona ($2,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Deltona?
About 48% at the midpoint, or $1,150 out of $2,400. Materials are 42% and permits 9%. Nationally, labor is 51%.
+What would 12x16 (192 sq ft) cost in Deltona?
$760 to $2,450. Pick a different size in the estimator above to get your own number.
+Does concrete patio need a permit in Deltona?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $400 for fees in the Deltona area (our national range of $50 to $400 scaled by the local price level).
+Is Deltona expensive for concrete patio compared with the rest of Florida?
Deltona is 2% below the Florida statewide estimate ($2,450 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do cement masons and concrete finishers earn in Deltona?
The BLS median is $23.08 an hour in the Deltona area, compared with $27.41 nationally. The 25th to 75th percentile range is $21.21 to $27.43.
+What do basic and premium concrete patio work cost in Deltona?
For 300 sq ft, basic work runs $1,150 to $2,150 and premium work $2,650 to $3,600. Basic means: plain gray slab, broom finish, flat yard. Premium means: exposed aggregate or heavy decorative finish, drainage work.
+When is the best time to pour a concrete patio in Deltona?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. November and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add an acid or water-based stain" add in Deltona?
$820 to $2,750 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete patio near Deltona
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Patio Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- HomeGuide: How Much Does Stamped Concrete Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's sample 200 sq ft broom-finish patio line ($500-$900 in materials) divided by 200 sq ft.