Concrete driveway cost in Niles, MI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,500 – $8,850
- Per sq ft
- $5.75 – $14.50
- before permit
- Versus US midpoint
- −4%
- US $6,450
- Rank of 300 metros
- #162
- 1 = most expensive
Niles homeowners pay roughly $3,500 to $8,850 to pour a concrete driveway at 600 sq ft, or $5.75 to $14.50 per sq ft (permit not included). Against the US midpoint, Niles is 4% lower. Building materials run about 6% below the US average here (BEA goods price index 93.7).
Estimate your concrete driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Niles, MI, standard level
$5,100 to $7,250
About $8.35 to $12 per sq ft before permits. Labor is about 69% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,600 | $1,950 |
| Labor | $3,450 | $5,150 |
| Permits and fees | $90 | $140 |
| Total | $5,100 | $7,250 |
Cost breakdown for 600 sq ft in Niles, MI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,300 | $1,750 | $2,250 | 29% |
| Labor | $2,150 | $4,300 | $6,450 | 69% |
| Permits and fees | $45 | $120 | $180 | 2% |
| Total | $3,500 | $6,200 | $8,850 | 100% |
Where the Niles price comes from
We price the labor side from BLS wage data for 4 trades: cement masons and concrete finishers at 50%, construction laborers at 30%, operating engineers and other construction equipment operators at 10%, carpenters at 10%. Weighted together, Niles wages are 0.97 times the national level. Labor makes up about 69% of the midpoint estimate (69% at national prices).
On the materials line, the BEA goods price index for the Niles metro is 93.7 (US = 100). The midpoint materials bill for 600 sq ft comes to $1,750, compared with $1,900 at national prices. Permit and inspection fees are scaled by the broader index (92.4) and land at $45 to $180.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Niles is 0.97 times the national level.
For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $26.73 an hour, which is in line with the national $27.41. The middle half of them earn between $22.48 and $28.01 an hour. BLS counts 70 of them working in the area, 11.7 for every 10,000 jobs (US: 13.3), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $22.37 an hour, in line with the US median of $22.66. The middle half of them earn between $18.65 and $27.90 an hour. About 290 work in the metro. That is 48.4 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $28.69 an hour, which is in line with the national $28.78. The middle half of them earn between $26.20 and $39.02 an hour. BLS counts 130 of them working in the area, 21.7 for every 10,000 jobs (US: 30.7), so the local bench is thinner than average.
For carpenters (47-2031, weighted 10%) the local median is $26.26 an hour, which is 10% below the national $29.12. The middle half of them earn between $22.81 and $30.51 an hour. BLS counts 180 of them working in the area, 30.0 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($28.01 an hour) instead of the median, the labor line grows by about $100. At the 25th percentile ($22.48) it shrinks by about $340. The total moves by 1.7% or 5.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 59,970 jobs in the Niles area. That makes it the 289th largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $22.48 | $26.73 | $28.01 | $27.41 | 0.98 | metro |
| Construction laborers (47-2061) | 30% | $18.65 | $22.37 | $27.90 | $22.66 | 0.99 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $26.20 | $28.69 | $39.02 | $28.78 | 1.00 | metro |
| Carpenters (47-2031) | 10% | $22.81 | $26.26 | $30.51 | $29.12 | 0.90 | metro |
| Blended | 100% | 0.97 | |||||
Related projects, priced for Niles
Because every project leans on different trades, Niles's wage level does not move all prices equally. Against the US midpoint, paver patio runs −3% and concrete slab −5%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Asphalt driveway | 600 sq ft | $2,900 – $7,150 | −4% |
| Gravel driveway | 1,000 sq ft | $2,400 – $9,850 | −4% |
| Concrete slab | 400 sq ft | $2,350 – $4,950 | −5% |
| Stamped concrete | 400 sq ft | $3,100 – $7,600 | −4% |
| Paver patio | 300 sq ft | $2,900 – $5,250 | −3% |
| Concrete patio | 300 sq ft | $1,200 – $3,850 | −5% |
Is Niles cheap or dear? The local comparison
Of the five closest metros, none is cheaper than Niles. Kalamazoo comes closest at about $6,250.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Niles, MIthis page | $3,500 – $8,850 | $6,200 | |
| South Bend, IN30 miles | $3,750 – $9,600 | $6,650 | +8% |
| Elkhart, IN45 miles | $3,700 – $9,500 | $6,600 | +7% |
| Chicago, IL55 miles | $4,650 – $12,000 | $8,350 | +35% |
| Kalamazoo, MI70 miles | $3,550 – $9,000 | $6,250 | +1% |
| Kenosha, WI80 miles | $3,900 – $9,800 | $6,850 | +11% |
| Michigan (statewide) | $3,700 – $9,400 | $6,550 | +6% |
| United States | $3,650 – $9,200 | $6,450 | +4% |
Across 300 US metros, Niles comes in at #162 from the top. The priciest is Kahului, HI at $10,000; the cheapest is McAllen, TX at $4,950 (midpoints, 600 sq ft). Statewide, Niles is 6% below the Michigan figure.
Other Michigan metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $3,950 – $10,100 | $7,000 | +13% |
| Grand Rapids, MI | 598,260 jobs | $3,650 – $9,250 | $6,450 | +4% |
| Ann Arbor, MI | 219,730 jobs | $3,700 – $9,450 | $6,550 | +6% |
| Lansing, MI | 217,180 jobs | $3,800 – $9,700 | $6,750 | +9% |
| Flint, MI | 135,040 jobs | $3,800 – $9,800 | $6,800 | +10% |
| Kalamazoo, MI | 121,790 jobs | $3,550 – $9,000 | $6,250 | +1% |
Cities with a workforce like Niles's
Big cities and small ones price differently, so here is Niles against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Alexandria, LA | 60,000 jobs | $3,150 – $7,800 | $5,500 | −11% |
| Kingston, NY | 59,140 jobs | $3,700 – $9,400 | $6,550 | +6% |
| Chambersburg, PA | 60,280 jobs | $3,500 – $8,700 | $6,100 | −1% |
| Altoona, PA | 58,650 jobs | $3,500 – $8,750 | $6,150 | −1% |
Extras that change the Niles total
Extras are quoted nationally and then scaled to Niles by the average of the local wage index (0.97) and goods index (0.94), a factor of 0.96. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $570 – $1,700 |
| Remove the old driveway | $1,150 – $3,450 |
Why two Niles quotes can differ
Permits and the apron
A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.
Thickness
HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.
Old driveway removal
Tearing out the old surface adds about $2-$6 per sq ft, and some cities want the haul-off documented.
When to schedule concrete driveway in Niles
We use NOAA's 1991-2020 climate normals for Niles (in the city). These are 30-year monthly averages, not forecasts.
May through October is the stretch where pouring concrete runs into the fewest weather problems in Niles (6 of 12 months). January, February, March, April, November and December have an average overnight low of 40°F or below.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Niles gets about 42 inches of precipitation in a normal year, including roughly 63 inches of snow. The wettest months are May, August and October (4.4 inches in August). Inside the workable window, July and September are the driest, at 3.7 and 3.5 inches. The station averages about 12 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 33 | 19 | 3.0 | Cold |
| Feb | 36 | 21 | 2.3 | Cold |
| Mar | 47 | 29 | 2.5 | Cold |
| Apr | 60 | 39 | 3.7 | Cold |
| May | 71 | 48 | 4.2 | Workable |
| Jun | 80 | 58 | 4.0 | Workable |
| Jul | 83 | 61 | 3.7 | Workable |
| Aug | 81 | 61 | 4.4 | Workable |
| Sep | 76 | 53 | 3.5 | Workable |
| Oct | 63 | 43 | 4.4 | Workable |
| Nov | 49 | 33 | 3.0 | Cold |
| Dec | 38 | 25 | 2.7 | Cold |
Cost by quality level and size in Niles
Three bands are cut from the same cited range and localized for Niles wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$3,500 to $5,650
Plain gray, 4-inch broom finish, flat site
Standard
$5,100 to $7,250
5-inch with rebar and saw-cut joints, a border or one color
Premium
$6,700 to $8,850
6-inch for heavy vehicles, stamped or colored, grading needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,450 – $2,300 | $2,100 – $3,000 | $2,750 – $3,650 |
| 2-car (20x24), 480 sq ft | $2,800 – $4,550 | $4,100 – $5,850 | $5,400 – $7,100 |
| 2-car + apron (600 sq ft) | $3,500 – $5,650 | $5,100 – $7,250 | $6,700 – $8,850 |
| 3-car (900 sq ft) | $5,250 – $8,400 | $7,600 – $10,800 | $10,000 – $13,200 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,100 to $7,250 for Niles, MI is attached.
Detailed concrete driveway report for Niles, MI, $9
Multi-page report for Niles, MI: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete driveway in Niles: your questions
+How much does it cost to pour a concrete driveway in Niles?
For 600 sq ft, expect $3,500 to $8,850 in the Niles area. A standard-spec job lands at $5,100 to $7,250. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete driveway in Niles?
About $5.75 to $14.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $6 to $15.
+Is concrete driveway cheaper in Niles or South Bend?
South Bend is 30 miles away. The midpoint for 600 sq ft there is $6,650, which is 8% more than Niles ($6,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Niles?
About 69% at the midpoint, or $4,300 out of $6,200. Materials are 29% and permits 2%. Nationally, labor is 69%.
+What would 2-car + apron (600 sq ft) cost in Niles?
$3,500 to $8,850. Pick a different size in the estimator above to get your own number.
+Does concrete driveway need a permit in Niles?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Niles area (our national range of $50 to $200 scaled by the local price level).
+Is Niles expensive for concrete driveway compared with the rest of Michigan?
Niles is 6% below the Michigan statewide estimate ($6,550 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.
+What do cement masons and concrete finishers earn in Niles?
The BLS median is $26.73 an hour in the Niles area, compared with $27.41 nationally. The 25th to 75th percentile range is $22.48 to $28.01.
+What do basic and premium concrete driveway work cost in Niles?
For 600 sq ft, basic work runs $3,500 to $5,650 and premium work $6,700 to $8,850. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.
+When is the best time to pour a concrete driveway in Niles?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through October. July and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add rebar reinforcement" add in Niles?
$570 to $1,700 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete driveway near Niles
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.