Concrete driveway cost in Lexington Park, MD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,550 – $8,850
- Per sq ft
- $5.80 – $14.50
- before permit
- Versus US midpoint
- −3%
- US $6,450
- Rank of 300 metros
- #160
- 1 = most expensive
Local price for a concrete driveway in the Lexington Park area: $3,550 to $8,850 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 3% lower than the US figure. Cement masons and concrete finishers earn a median of $24.98 an hour in the Lexington Park area, 9% below the US median of $27.41.
Estimate your concrete driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Lexington Park, MD, standard level
$5,150 to $7,250
About $8.40 to $12 per sq ft before permits. Labor is about 68% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,700 | $2,100 |
| Labor | $3,350 | $5,050 |
| Permits and fees | $95 | $160 |
| Total | $5,150 | $7,250 |
Cost breakdown for 600 sq ft in Lexington Park, MD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,400 | $1,900 | $2,400 | 30% |
| Labor | $2,100 | $4,200 | $6,300 | 68% |
| Permits and fees | $50 | $130 | $200 | 2% |
| Total | $3,550 | $6,200 | $8,850 | 100% |
What is behind the Lexington Park number
The wage side of the estimate leans on cement masons and concrete finishers, who do 50% of the hours on a typical job. Their local median is $24.98 an hour. Add the other trades involved and the blended wage index for Lexington Park is 0.95 (US = 1.00), which puts labor at 68% of the total. BLS does not publish this trade for the metro, so we used the Maryland statewide median.
Materials are scaled with BEA's regional price parity for goods. Lexington Park is at 99.7 against 100 for the US, so a materials line of $1,900 nationally becomes $1,900 here (midpoint, 600 sq ft). Permits follow the all-items index of 100.8: $50 to $200.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Lexington Park. The wage table below marks each row.
Extras that change the Lexington Park total
Add-ons start from national price ranges and are scaled by 0.97 for Lexington Park, which is the average of the area's wage index (0.95) and goods price index (1.00). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $580 – $1,750 |
| Remove the old driveway | $1,150 – $3,500 |
Why two Lexington Park quotes can differ
Finish
Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).
Permits and the apron
A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.
Thickness
HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.
Who does the work: Lexington Park trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lexington Park the blend is 0.95.
Cement masons and concrete finishers (47-2051) carry 50% of the labor weighting. BLS does not publish this trade for the Lexington Park metro, so we used the Maryland statewide median: $24.98 an hour against $27.41 for the US. The middle half of them earn between $22.75 and $28.44 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $21.88 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.05 and $23.85 an hour. BLS counts 450 of them working in the area, 63.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $29.29 an hour, in line with the US median of $28.78. The middle half of them earn between $24.94 and $30.23 an hour. About 230 work in the metro. That is 32.6 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
Carpenters (47-2031), 10% of the weighting: a median of $30.23 an hour, 4% above the US median of $29.12. The middle half of them earn between $26.36 and $35.38 an hour. About 210 work in the metro. That is 29.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $280 to the midpoint estimate; the 25th percentile takes off about $180. That is a swing of roughly 2.9% to 4.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lexington Park has 70,650 jobs in total (BLS, May 2025), ranking 259th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $22.75 | $24.98 | $28.44 | $27.41 | 0.91 | state |
| Construction laborers (47-2061) | 30% | $18.05 | $21.88 | $23.85 | $22.66 | 0.97 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $24.94 | $29.29 | $30.23 | $28.78 | 1.02 | metro |
| Carpenters (47-2031) | 10% | $26.36 | $30.23 | $35.38 | $29.12 | 1.04 | metro |
| Blended | 100% | 0.95 | |||||
Pick a size, pick a tier: concrete driveway pricing in Lexington Park
The cited range is split into basic, standard and premium bands, then scaled to Lexington Park. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to 3-car (900 sq ft).
Basic
$3,550 to $5,650
Plain gray, 4-inch broom finish, flat site
Standard
$5,150 to $7,250
5-inch with rebar and saw-cut joints, a border or one color
Premium
$6,750 to $8,850
6-inch for heavy vehicles, stamped or colored, grading needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,450 – $2,350 | $2,100 – $3,000 | $2,800 – $3,650 |
| 2-car (20x24), 480 sq ft | $2,850 – $4,550 | $4,150 – $5,850 | $5,400 – $7,150 |
| 2-car + apron (600 sq ft) | $3,550 – $5,650 | $5,150 – $7,250 | $6,750 – $8,850 |
| 3-car (900 sq ft) | $5,300 – $8,450 | $7,650 – $10,800 | $10,000 – $13,200 |
Is Lexington Park cheap or dear? The local comparison
Same job, same size (600 sq ft), priced for the nearest metros. Washington is the priciest of the group at $6,600. Richmond is the cheapest at $5,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lexington Park, MDthis page | $3,550 – $8,850 | $6,200 | |
| Washington, DC65 miles | $3,750 – $9,450 | $6,600 | +6% |
| Baltimore, MD70 miles | $3,600 – $8,950 | $6,300 | +1% |
| Dover, DE75 miles | $3,400 – $8,600 | $6,000 | −3% |
| Richmond, VA80 miles | $3,250 – $8,100 | $5,700 | −8% |
| Virginia Beach, VA100 miles | $3,300 – $8,150 | $5,700 | −8% |
| Maryland (statewide) | $3,600 – $9,000 | $6,300 | +2% |
| United States | $3,650 – $9,200 | $6,450 | +4% |
Out of the 300 metros we cover, Lexington Park ranks #160 for the cost of this job (#1 is the most expensive). Statewide, Lexington Park is 2% below the Maryland figure.
Elsewhere in Maryland
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Baltimore, MD | 1,356,680 jobs | $3,600 – $8,950 | $6,300 | +1% |
| Hagerstown, MD | 107,170 jobs | $3,300 – $8,250 | $5,750 | −7% |
Metros of a similar size
Big cities and small ones price differently, so here is Lexington Park against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bismarck, ND | 71,270 jobs | $3,600 – $9,200 | $6,400 | +3% |
| Janesville, WI | 69,870 jobs | $4,150 – $10,800 | $7,500 | +21% |
| Redding, CA | 71,550 jobs | $4,050 – $10,200 | $7,150 | +15% |
| Wausau, WI | 69,530 jobs | $3,800 – $9,800 | $6,800 | +10% |
Related projects, priced for Lexington Park
Jobs that often go together with concrete driveway are priced below at their usual sizes, using the same Lexington Park wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (+2%) and stamped concrete lowest (−3%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Asphalt driveway | 600 sq ft | $3,100 – $7,550 | +2% |
| Gravel driveway | 1,000 sq ft | $2,500 – $10,100 | −1% |
| Concrete slab | 400 sq ft | $2,400 – $5,100 | −2% |
| Stamped concrete | 400 sq ft | $3,150 – $7,700 | −3% |
| Paver patio | 300 sq ft | $3,000 – $5,450 | level |
| Concrete patio | 300 sq ft | $1,250 – $3,900 | −3% |
The best months for concrete driveway in Lexington Park
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Patuxent River Nas (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For pouring concrete, the comfortable months in Lexington Park are April through November: 8 of 12. Outside them, January, February, March and December have an average overnight low of 40°F or below.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Lexington Park gets about 45 inches of precipitation in a normal year, including roughly 13 inches of snow. The wettest months are June, July and August (4.7 inches in August). Inside the workable window, May and November are the driest, at 3.7 and 3.1 inches. The station averages about 26 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 45 | 30 | 2.9 | Cold |
| Feb | 48 | 31 | 2.8 | Cold |
| Mar | 55 | 37 | 4.0 | Cold |
| Apr | 66 | 47 | 3.7 | Workable |
| May | 75 | 57 | 3.7 | Workable |
| Jun | 83 | 66 | 4.3 | Workable |
| Jul | 87 | 71 | 4.5 | Workable |
| Aug | 85 | 69 | 4.7 | Workable |
| Sep | 79 | 63 | 4.2 | Workable |
| Oct | 69 | 52 | 4.0 | Workable |
| Nov | 58 | 41 | 3.1 | Workable |
| Dec | 50 | 34 | 3.5 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,150 to $7,250 for Lexington Park, MD is attached.
Detailed concrete driveway report for Lexington Park, MD, $9
The report lays out the concrete driveway numbers for Lexington Park, MD line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete driveway in Lexington Park: your questions
+How much does it cost to pour a concrete driveway in Lexington Park?
For 600 sq ft, expect $3,550 to $8,850 in the Lexington Park area. A standard-spec job lands at $5,150 to $7,250. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete driveway in Lexington Park?
About $5.80 to $14.50 per sq ft for materials and labor, plus $50 to $200 for the permit if one is needed. The US range is $6 to $15.
+Is concrete driveway cheaper in Lexington Park or Washington?
Washington is 65 miles away. The midpoint for 600 sq ft there is $6,600, which is 6% more than Lexington Park ($6,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lexington Park?
About 68% at the midpoint, or $4,200 out of $6,200. Materials are 30% and permits 2%. Nationally, labor is 69%.
+What would 2-car + apron (600 sq ft) cost in Lexington Park?
$3,550 to $8,850. Pick a different size in the estimator above to get your own number.
+Does concrete driveway need a permit in Lexington Park?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $200 for fees in the Lexington Park area (our national range of $50 to $200 scaled by the local price level).
+Is Lexington Park expensive for concrete driveway compared with the rest of Maryland?
Lexington Park is 2% below the Maryland statewide estimate ($6,300 at the midpoint). We cover 3 metros in Maryland; see the state page to compare them.
+What do cement masons and concrete finishers earn in Lexington Park?
BLS has no published metro figure here, so we use the statewide median of $24.98 an hour, compared with $27.41 nationally. The 25th to 75th percentile range is $22.75 to $28.44.
+What do basic and premium concrete driveway work cost in Lexington Park?
For 600 sq ft, basic work runs $3,550 to $5,650 and premium work $6,750 to $8,850. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.
+When is the best time to pour a concrete driveway in Lexington Park?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. May and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add rebar reinforcement" add in Lexington Park?
$580 to $1,750 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete driveway near Lexington Park
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.