Chain-link fence cost in El Paso, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,300 – $4,950
- Per linear ft
- $8.55 – $32
- before permit
- Versus US midpoint
- −19%
- US $3,850
- Rank of 300 metros
- #295
- 1 = most expensive
Local price for a chain-link fence in the El Paso area: $1,300 to $4,950 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 19% lower than the US figure. Construction laborers earn a median of $17.15 an hour in the El Paso area, 24% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in El Paso, TX, standard level
$2,400 to $3,850
About $15.50 to $25 per linear ft before permits. Labor is about 55% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,200 | $2,200 |
| Permits and fees | $65 | $110 |
| Total | $2,400 | $3,850 |
Cost breakdown for 150 linear ft in El Paso, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $840 | $1,350 | $1,850 | 43% |
| Labor | $440 | $1,700 | $2,950 | 55% |
| Permits and fees | $35 | $85 | $130 | 3% |
| Total | $1,300 | $3,150 | $4,950 | 100% |
What is behind the El Paso number
The wage side of the estimate leans on construction laborers, who do 60% of the hours on a typical job. Their local median is $17.15 an hour. Add the other trades involved and the blended wage index for El Paso is 0.73 (US = 1.00), which puts labor at 55% of the total.
Materials are scaled with BEA's regional price parity for goods. El Paso is at 93.8 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 89.9: $35 to $130.
What nearby projects cost in El Paso
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same El Paso wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−11%) and wood fence lowest (−15%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,550 – $6,500 | −15% |
| Vinyl fence | 150 linear ft | $4,100 – $8,100 | −11% |
| Aluminum fence | 150 linear ft | $3,250 – $9,950 | −13% |
| Gravel driveway | 1,000 sq ft | $2,100 – $8,650 | −15% |
Add-ons priced for El Paso
Add-ons start from national price ranges and are scaled by 0.84 for El Paso, which is the average of the area's wage index (0.73) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $65 – $840 |
The best months for chain-link fence in El Paso
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, El Paso Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in El Paso are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
El Paso gets about 9 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are July, August and September (1.7 inches in August). Inside the workable window, March and April are the driest, at 0.2 and 0.2 inches. The station averages about 117 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 35 | 0.4 | Workable |
| Feb | 64 | 39 | 0.4 | Workable |
| Mar | 72 | 46 | 0.2 | Workable |
| Apr | 80 | 53 | 0.2 | Workable |
| May | 89 | 62 | 0.4 | Workable |
| Jun | 97 | 71 | 0.7 | Hot |
| Jul | 96 | 73 | 1.6 | Hot |
| Aug | 94 | 72 | 1.7 | Hot |
| Sep | 88 | 65 | 1.5 | Workable |
| Oct | 79 | 54 | 0.6 | Workable |
| Nov | 67 | 42 | 0.4 | Workable |
| Dec | 58 | 34 | 0.6 | Workable |
Who does the work: El Paso trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For El Paso the blend is 0.73.
For construction laborers (47-2061, weighted 60%) the local median is $17.15 an hour, which is 24% below the national $22.66. The middle half of them earn between $15.39 and $19.10 an hour. BLS counts 2,140 of them working in the area, 63.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Carpenters (47-2031), 40% of the weighting: a median of $20.40 an hour, 30% below the US median of $29.12. The middle half of them earn between $17.42 and $23.98 an hour. About 620 work in the metro. That is 18.3 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 3.5% to 3.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
El Paso has 339,120 jobs in total (BLS, May 2025), ranking 76th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $15.39 | $17.15 | $19.10 | $22.66 | 0.76 | metro |
| Carpenters (47-2031) | 40% | $17.42 | $20.40 | $23.98 | $29.12 | 0.70 | metro |
| Blended | 100% | 0.73 | |||||
How El Paso compares
Same job, same size (150 linear ft), priced for the nearest metros. Albuquerque is the priciest of the group at $3,600.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| El Paso, TXthis page | $1,300 – $4,950 | $3,150 | |
| Las Cruces, NM95 miles | $1,450 – $5,550 | $3,500 | +12% |
| Odessa, TX175 miles | $1,400 – $5,350 | $3,350 | +7% |
| Midland, TX210 miles | $1,400 – $5,650 | $3,550 | +13% |
| Lubbock, TX250 miles | $1,350 – $5,050 | $3,200 | +2% |
| Albuquerque, NM255 miles | $1,450 – $5,700 | $3,600 | +14% |
| Texas (statewide) | $1,450 – $5,450 | $3,450 | +10% |
| United States | $1,550 – $6,150 | $3,850 | +23% |
Out of the 300 metros we cover, El Paso ranks #295 for the cost of this job (#1 is the most expensive). Statewide, El Paso is 9% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $1,500 – $5,750 | $3,600 | +15% |
| Houston, TX | 3,289,720 jobs | $1,450 – $5,550 | $3,500 | +12% |
| Austin, TX | 1,293,690 jobs | $1,400 – $5,600 | $3,500 | +12% |
| San Antonio, TX | 1,126,880 jobs | $1,400 – $5,300 | $3,350 | +7% |
| McAllen, TX | 296,700 jobs | $1,300 – $4,850 | $3,100 | −2% |
| Corpus Christi, TX | 192,580 jobs | $1,400 – $5,400 | $3,400 | +9% |
Metros of a similar size
Big cities and small ones price differently, so here is El Paso against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| North Port, FL | 339,940 jobs | $1,450 – $5,750 | $3,600 | +15% |
| Bakersfield, CA | 338,230 jobs | $1,700 – $6,850 | $4,250 | +36% |
| Durham, NC | 344,020 jobs | $1,450 – $5,800 | $3,650 | +16% |
| Harrisburg, PA | 335,010 jobs | $1,550 – $6,200 | $3,900 | +24% |
El Paso: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to El Paso. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,300 to $2,750
4-ft galvanized, front yard
Standard
$2,400 to $3,850
6-ft galvanized backyard fence
Premium
$3,500 to $4,950
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $890 – $1,850 | $1,650 – $2,600 | $2,350 – $3,350 |
| 150 ft (150 linear ft) | $1,300 – $2,750 | $2,400 – $3,850 | $3,500 – $4,950 |
| 200 ft (200 linear ft) | $1,750 – $3,650 | $3,200 – $5,100 | $4,600 – $6,550 |
| full lot (300 linear ft) | $2,600 – $5,450 | $4,750 – $7,600 | $6,900 – $9,750 |
Specs and site conditions that change a El Paso bid
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,400 to $3,850 for El Paso, TX is attached.
Take this estimate with you: PDF report, $9
Multi-page report for El Paso, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in El Paso: your questions
+How much does it cost to install a chain-link fence in El Paso?
For 150 linear ft, expect $1,300 to $4,950 in the El Paso area. A standard-spec job lands at $2,400 to $3,850. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in El Paso?
About $8.55 to $32 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in El Paso or Las Cruces?
Las Cruces is 95 miles away. The midpoint for 150 linear ft there is $3,500, which is 12% more than El Paso ($3,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in El Paso?
About 55% at the midpoint, or $1,700 out of $3,150. Materials are 43% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in El Paso?
$1,750 to $6,550. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in El Paso?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the El Paso area (our national range of $40 to $150 scaled by the local price level).
+Is El Paso expensive for chain-link fence compared with the rest of Texas?
El Paso is 9% below the Texas statewide estimate ($3,450 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do construction laborers earn in El Paso?
The BLS median is $17.15 an hour in the El Paso area, compared with $22.66 nationally. The 25th to 75th percentile range is $15.39 to $19.10.
+What do basic and premium chain-link fence work cost in El Paso?
For 150 linear ft, basic work runs $1,300 to $2,750 and premium work $3,500 to $4,950. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in El Paso?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. March and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in El Paso?
$65 to $840, from a national range scaled by the local wage and goods indexes.
Chain-link fence near El Paso
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).