Chain-link fence cost in Las Cruces, NM
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,450 – $5,550
- Per linear ft
- $9.30 – $36
- before permit
- Versus US midpoint
- −9%
- US $3,850
- Rank of 300 metros
- #224
- 1 = most expensive
Local price for a chain-link fence in the Las Cruces area: $1,450 to $5,550 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Construction laborers earn a median of $18.97 an hour in the Las Cruces area, 16% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Las Cruces, NM, standard level
$2,650 to $4,350
About $17.50 to $28 per linear ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,450 | $2,650 |
| Permits and fees | $65 | $110 |
| Total | $2,650 | $4,350 |
Cost breakdown for 150 linear ft in Las Cruces, NM
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $870 | $1,350 | $1,850 | 39% |
| Labor | $530 | $2,050 | $3,550 | 58% |
| Permits and fees | $35 | $85 | $140 | 2% |
| Total | $1,450 | $3,500 | $5,550 | 100% |
Why Las Cruces prices look the way they do
The wage side of the estimate leans on construction laborers, who do 60% of the hours on a typical job. Their local median is $18.97 an hour. Add the other trades involved and the blended wage index for Las Cruces is 0.88 (US = 1.00), which puts labor at 58% of the total.
Materials are scaled with BEA's regional price parity for goods. Las Cruces is at 96.1 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 90.2: $35 to $140.
Planning more than one job in Las Cruces?
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Las Cruces wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−6%) and gravel driveway lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,850 – $7,150 | −7% |
| Vinyl fence | 150 linear ft | $4,300 – $8,650 | −6% |
| Aluminum fence | 150 linear ft | $3,550 – $10,700 | −6% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,100 | −11% |
Who does the work: Las Cruces trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Las Cruces the blend is 0.88.
For construction laborers (47-2061, weighted 60%) the local median is $18.97 an hour, which is 16% below the national $22.66. The middle half of them earn between $16.98 and $21.56 an hour. BLS counts 860 of them working in the area, 107.5 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Carpenters (47-2031), 40% of the weighting: a median of $27.42 an hour, 6% below the US median of $29.12. The middle half of them earn between $21.44 and $29.32 an hour. About 250 work in the metro. That is 31.3 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 3.5% to 4.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Las Cruces has 80,000 jobs in total (BLS, May 2025), ranking 238th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $16.98 | $18.97 | $21.56 | $22.66 | 0.84 | metro |
| Carpenters (47-2031) | 40% | $21.44 | $27.42 | $29.32 | $29.12 | 0.94 | metro |
| Blended | 100% | 0.88 | |||||
Add-ons priced for Las Cruces
Add-ons start from national price ranges and are scaled by 0.92 for Las Cruces, which is the average of the area's wage index (0.88) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $75 – $920 |
The best months for chain-link fence in Las Cruces
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, State Univ (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Las Cruces are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Las Cruces gets about 9 inches of precipitation in a normal year, including roughly 1 inches of snow. The wettest months are July, August and September (1.8 inches in July). Inside the workable window, March and April are the driest, at 0.3 and 0.2 inches. The station averages about 109 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 30 | 0.5 | Workable |
| Feb | 64 | 34 | 0.4 | Workable |
| Mar | 71 | 39 | 0.3 | Workable |
| Apr | 79 | 46 | 0.2 | Workable |
| May | 87 | 54 | 0.4 | Workable |
| Jun | 96 | 64 | 0.7 | Hot |
| Jul | 96 | 69 | 1.8 | Hot |
| Aug | 94 | 68 | 1.7 | Hot |
| Sep | 88 | 61 | 1.4 | Workable |
| Oct | 80 | 48 | 0.8 | Workable |
| Nov | 68 | 37 | 0.4 | Workable |
| Dec | 58 | 30 | 0.6 | Workable |
Why two Las Cruces quotes can differ
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Las Cruces: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Las Cruces. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,450 to $3,100
4-ft galvanized, front yard
Standard
$2,650 to $4,350
6-ft galvanized backyard fence
Premium
$3,900 to $5,550
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $960 – $2,100 | $1,800 – $2,900 | $2,650 – $3,750 |
| 150 ft (150 linear ft) | $1,450 – $3,100 | $2,650 – $4,350 | $3,900 – $5,550 |
| 200 ft (200 linear ft) | $1,900 – $4,100 | $3,550 – $5,750 | $5,200 – $7,400 |
| full lot (300 linear ft) | $2,800 – $6,100 | $5,300 – $8,550 | $7,750 – $11,000 |
Las Cruces against nearby metros and the rest of New Mexico
Of the five closest metros, 2 are cheaper than Las Cruces. El Paso is the lowest at about $3,150 (midpoint, 150 linear ft), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Las Cruces, NMthis page | $1,450 – $5,550 | $3,500 | |
| El Paso, TX95 miles | $1,300 – $4,950 | $3,150 | −11% |
| Albuquerque, NM195 miles | $1,450 – $5,700 | $3,600 | +2% |
| Santa Fe, NM225 miles | $1,450 – $5,800 | $3,600 | +3% |
| Odessa, TX255 miles | $1,400 – $5,350 | $3,350 | −4% |
| Midland, TX285 miles | $1,400 – $5,650 | $3,550 | +1% |
| New Mexico (statewide) | $1,450 – $5,600 | $3,500 | level |
| United States | $1,550 – $6,150 | $3,850 | +10% |
Out of the 300 metros we cover, Las Cruces ranks #224 for the cost of this job (#1 is the most expensive). Statewide, Las Cruces is 0% below the New Mexico figure.
Elsewhere in New Mexico
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $1,450 – $5,700 | $3,600 | +2% |
| Santa Fe, NM | 61,770 jobs | $1,450 – $5,800 | $3,600 | +3% |
Metros of a similar size
Big cities and small ones price differently, so here is Las Cruces against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Jefferson City, MO | 80,220 jobs | $1,550 – $6,500 | $4,000 | +15% |
| Saginaw, MI | 80,000 jobs | $1,500 – $6,150 | $3,850 | +9% |
| Greenville, NC | 80,770 jobs | $1,400 – $5,450 | $3,450 | −2% |
| Merced, CA | 79,510 jobs | $1,700 – $7,000 | $4,350 | +24% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,650 to $4,350 for Las Cruces, NM is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Las Cruces, NM: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Las Cruces: your questions
+How much does it cost to install a chain-link fence in Las Cruces?
For 150 linear ft, expect $1,450 to $5,550 in the Las Cruces area. A standard-spec job lands at $2,650 to $4,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Las Cruces?
About $9.30 to $36 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Las Cruces or El Paso?
El Paso is 95 miles away. The midpoint for 150 linear ft there is $3,150, which is 11% less than Las Cruces ($3,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Las Cruces?
About 58% at the midpoint, or $2,050 out of $3,500. Materials are 39% and permits 2%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Las Cruces?
$1,900 to $7,400. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Las Cruces?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Las Cruces area (our national range of $40 to $150 scaled by the local price level).
+Is Las Cruces expensive for chain-link fence compared with the rest of New Mexico?
Las Cruces is 0% below the New Mexico statewide estimate ($3,500 at the midpoint). We cover 3 metros in New Mexico; see the state page to compare them.
+What do construction laborers earn in Las Cruces?
The BLS median is $18.97 an hour in the Las Cruces area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.98 to $21.56.
+What do basic and premium chain-link fence work cost in Las Cruces?
For 150 linear ft, basic work runs $1,450 to $3,100 and premium work $3,900 to $5,550. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Las Cruces?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. March and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Las Cruces?
$75 to $920, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Las Cruces
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).