Chain-link fence cost in New Mexico
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (150 linear ft)
- $1,450 – $5,600
- Per linear ft
- $9.30 – $36.50
- before permit
- Versus US midpoint
- −9%
- US $3,850
- Metros covered
- 3
Across New Mexico, a chain-link fence costs about $1,450 to $5,600 for 150 linear ft. Statewide, that midpoint is 9% below the US figure of $3,850. Construction laborers earn a median $18.46 an hour in New Mexico (US: $22.66).
Inside New Mexico, the metros we cover range from $3,500 (Las Cruces) to $3,600 (Santa Fe) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in New Mexico (statewide), standard level
$2,700 to $4,350
About $17.50 to $28 per linear ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,450 | $2,650 |
| Permits and fees | $65 | $110 |
| Total | $2,700 | $4,350 |
Cost breakdown for 150 linear ft in New Mexico
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $870 | $1,350 | $1,850 | 39% |
| Labor | $530 | $2,050 | $3,600 | 58% |
| Permits and fees | $35 | $90 | $140 | 2% |
| Total | $1,450 | $3,500 | $5,600 | 100% |
Basic, standard or premium: New Mexico prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,450 to $3,100
4-ft galvanized, front yard
Standard
$2,700 to $4,350
6-ft galvanized backyard fence
Premium
$3,950 to $5,600
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $970 – $2,100 | $1,800 – $2,950 | $2,650 – $3,750 |
| 150 ft (150 linear ft) | $1,450 – $3,100 | $2,700 – $4,350 | $3,950 – $5,600 |
| 200 ft (200 linear ft) | $1,900 – $4,100 | $3,550 – $5,750 | $5,200 – $7,400 |
| full lot (300 linear ft) | $2,850 – $6,100 | $5,300 – $8,600 | $7,750 – $11,000 |
Wages behind the New Mexico number
New Mexico's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.88 times the national level.
For construction laborers (47-2061, weighted 60%) the local median is $18.46 an hour, which is 19% below the national $22.66. The middle half of them earn between $17.07 and $22.26 an hour. BLS counts 12,470 of them working in the state, 143.2 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Carpenters (47-2031), 40% of the weighting: a median of $28.71 an hour, in line with the US median of $29.12. The middle half of them earn between $22.67 and $30.44 an hour. About 3,630 work in the state. That is 41.7 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
A crew paid at the 75th percentile for construction laborers ($22.26 an hour) would add about $230 to the statewide midpoint; one at the 25th percentile ($17.07) would take off about $85. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 870,970 jobs across New Mexico (May 2025), which is 0.6% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $17.07 | $18.46 | $22.26 | $22.66 | 0.81 | state |
| Carpenters (47-2031) | 40% | $22.67 | $28.71 | $30.44 | $29.12 | 0.99 | state |
| Blended | 100% | 0.88 | |||||
Add-ons priced for New Mexico
Add-ons start from national price ranges and are scaled by 0.92 for New Mexico, which is the average of the area's wage index (0.88) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $75 – $920 |
New Mexico against its neighbors
New Mexico ranks 43 of 51 (the 50 states plus DC) for chain-link fence, where 1 is the most expensive. The costliest is Hawaii at $5,300 and the cheapest Arkansas at $3,250, both for 150 linear ft at the midpoint. New Mexico sits at $3,500. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Colorado | 340 miles away | $1,550 – $6,250 | $3,900 | +11% |
| Arizona | 340 miles away | $1,500 – $6,000 | $3,750 | +6% |
| Wyoming | 460 miles away | $1,450 – $5,900 | $3,700 | +5% |
| Utah | 520 miles away | $1,450 – $5,850 | $3,650 | +4% |
| Oklahoma | 540 miles away | $1,350 – $5,250 | $3,300 | −6% |
Related projects, priced for New Mexico
Each project weights the trades differently, so New Mexico's wage level does not push every price by the same amount. Compared with the US midpoint, vinyl fence is −5% and gravel driveway −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,850 – $7,200 | −6% |
| Vinyl fence | 150 linear ft | $4,300 – $8,650 | −5% |
| Aluminum fence | 150 linear ft | $3,550 – $10,700 | −6% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,200 | −10% |
When New Mexico weather lets you install
Weather decides when exterior installation can happen, and New Mexico is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.
Albuquerque has the longest comfortable season of the metros we cover in New Mexico at 10 months (August through May); Las Cruces has the shortest at 9 (September through May). Rainfall runs from 9 inches a year in Albuquerque to 13 inches in Santa Fe.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Albuquerque | 26 | 91 | 9 | 10: August through May |
| Las Cruces | 30 | 96 | 9 | 9: September through May |
| Santa Fe | 18 | 86 | 13 | 10: February through November |
Why two New Mexico quotes can differ
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
New Mexico metro-by-metro prices
2 of the 3 metros sit above the statewide midpoint of $3,500, and the top-to-bottom gap is 3%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (150 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Santa Fe, NM | $1,450 – $5,800 | $3,600 | +3% |
| Albuquerque, NM | $1,450 – $5,700 | $3,600 | +2% |
| Las Cruces, NM | $1,450 – $5,550 | $3,500 | level |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,700 to $4,350 for New Mexico is attached.
Detailed chain-link fence report for New Mexico, $9
The report lays out the chain-link fence numbers for New Mexico line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in New Mexico: your questions
+How much does it cost to install a chain-link fence in New Mexico?
$1,450 to $5,600 for 150 linear ft, using statewide wages and prices. Metro areas inside New Mexico can sit above or below that.
+Which city in New Mexico is cheapest for chain-link fence?
Las Cruces at about $3,500 (midpoint, 150 linear ft). The priciest is Santa Fe at $3,600.
+Is chain-link fence cheaper in New Mexico than the US average?
It is 9% cheaper: $3,500 against $3,850 for 150 linear ft at the midpoint.
+What share of the price is labor in New Mexico?
About 58% ($2,050). Materials are 39%. Statewide labor for this job is weighted 0.88x the national wage level.
+What do construction laborers earn in New Mexico?
The BLS statewide median is $18.46 an hour, against $22.66 for the US. The 25th to 75th percentile range is $17.07 to $22.26.
+Where does New Mexico rank for chain-link fence costs?
43rd most expensive of 51 (the 50 states plus DC) at the midpoint, $3,500 for 150 linear ft. Rank 1 is the costliest.
+What do basic and premium chain-link fence work cost in New Mexico?
For 150 linear ft, basic work runs $1,450 to $3,100 and premium work $3,950 to $5,600. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+Does the season matter for chain-link fence in New Mexico?
Yes where winters or summers are hard. Of the New Mexico metros we cover, Albuquerque has the most comfortable months (10 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add one gate" add in New Mexico?
$75 to $920, from a national range scaled by the statewide wage and goods indexes.
Chain-link fence by city in New Mexico
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).