Skip to content
CostLocal

Chain-link fence cost in Corpus Christi, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$1,400 – $5,400
Per linear ft
$9.05 – $35
before permit
Versus US midpoint
−11%
US $3,850
Rank of 300 metros
#246
1 = most expensive

Local price for a chain-link fence in the Corpus Christi area: $1,400 to $5,400 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Construction laborers earn a median of $20.40 an hour in the Corpus Christi area, 10% below the US median of $22.66.

Estimate your chain-link fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft galvanized backyard fence

Add-ons

Estimated cost for 150 linear ft in Corpus Christi, TX, standard level

$2,600 to $4,200

About $17 to $27.50 per linear ft before permits. Labor is about 58% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$1,550
Labor$1,400$2,550
Permits and fees$70$110
Total$2,600$4,200
Save and get a PDF report

Cost breakdown for 150 linear ft in Corpus Christi, TX

Part of the jobLowMidpointHighShare
Materials$840$1,350$1,85039%
Labor$510$2,000$3,45058%
Permits and fees$35$90$1403%
Total$1,400$3,400$5,400100%

Where the Corpus Christi price comes from

Labor is 58% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is construction laborers (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Corpus Christi the blended ratio comes out at 0.85.

Materials are scaled with BEA's regional price parity for goods. Corpus Christi is at 93.8 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.7: $35 to $140.

Add-ons priced for Corpus Christi

Add-ons start from national price ranges and are scaled by 0.89 for Corpus Christi, which is the average of the area's wage index (0.85) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add one gate (flat)$70 – $890

Who does the work: Corpus Christi trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Corpus Christi the blend is 0.85.

For construction laborers (47-2061, weighted 60%) the local median is $20.40 an hour, which is 10% below the national $22.66. The middle half of them earn between $17.27 and $23.05 an hour. BLS counts 2,640 of them working in the area, 137.1 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

Carpenters (47-2031), 40% of the weighting: a median of $22.69 an hour, 22% below the US median of $29.12. The middle half of them earn between $22.33 and $27.72 an hour. About 1,250 work in the metro. That is 64.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $190. That is a swing of roughly 5.7% to 4.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Corpus Christi has 192,580 jobs in total (BLS, May 2025), ranking 118th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)60%$17.27$20.40$23.05$22.660.90metro
Carpenters (47-2031)40%$22.33$22.69$27.72$29.120.78metro
Blended100%0.85

The best months for chain-link fence in Corpus Christi

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Corpus Christi Nas (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Corpus Christi are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.

Corpus Christi gets about 35 inches of precipitation in a normal year. The wettest months are May, September and October (6.2 inches in September). Inside the workable window, February and December are the driest, at 1.6 and 1.5 inches. The station averages about 96 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Corpus Christi Nas (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan68521.8Workable
Feb71561.6Workable
Mar76622.4Workable
Apr82682.5Workable
May87753.6Workable
Jun91793.5Hot
Jul92802.6Hot
Aug94802.0Hot
Sep91776.2Hot
Oct85714.7Workable
Nov77612.7Workable
Dec70541.5Workable

Corpus Christi: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Corpus Christi. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).

Basic

$1,400 to $3,000

4-ft galvanized, front yard

Standard

$2,600 to $4,200

6-ft galvanized backyard fence

Premium

$3,800 to $5,400

Vinyl-coated, 8 ft, extra gates

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$940 – $2,050$1,750 – $2,850$2,550 – $3,650
150 ft (150 linear ft)$1,400 – $3,000$2,600 – $4,200$3,800 – $5,400
200 ft (200 linear ft)$1,850 – $4,000$3,450 – $5,600$5,050 – $7,200
full lot (300 linear ft)$2,750 – $5,950$5,150 – $8,300$7,500 – $10,700

Corpus Christi against nearby metros and the rest of Texas

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $3,000 to $3,500 across Corpus Christi and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Corpus Christi, TXthis page$1,400 – $5,400$3,400
McAllen, TX115 miles$1,300 – $4,850$3,100−10%
Laredo, TX120 miles$1,300 – $4,800$3,050−10%
Brownsville, TX125 miles$1,300 – $4,700$3,000−12%
San Antonio, TX130 miles$1,400 – $5,300$3,350−2%
Austin, TX165 miles$1,400 – $5,600$3,500+3%
Texas (statewide)$1,450 – $5,450$3,450+1%
United States$1,550 – $6,150$3,850+13%

Out of the 300 metros we cover, Corpus Christi ranks #246 for the cost of this job (#1 is the most expensive). Statewide, Corpus Christi is 1% below the Texas figure.

Elsewhere in Texas

Texas metros compared with Corpus Christi
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$1,500 – $5,750$3,600+6%
Houston, TX3,289,720 jobs$1,450 – $5,550$3,500+3%
Austin, TX1,293,690 jobs$1,400 – $5,600$3,500+3%
San Antonio, TX1,126,880 jobs$1,400 – $5,300$3,350−2%
El Paso, TX339,120 jobs$1,300 – $4,950$3,150−8%
McAllen, TX296,700 jobs$1,300 – $4,850$3,100−10%

Metros of a similar size

Big cities and small ones price differently, so here is Corpus Christi against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Modesto, CA195,230 jobs$1,750 – $7,300$4,500+33%
Boulder, CO192,390 jobs$1,500 – $6,100$3,800+12%
Savannah, GA198,360 jobs$1,350 – $5,150$3,250−4%
Wilmington, NC191,280 jobs$1,450 – $5,750$3,600+6%

Chain-link fence: what moves the price in Corpus Christi

  • Survey

    A land survey ($300-$900) is worth it before you put a fence near a boundary.

  • Height

    A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).

  • Coating

    Black or green vinyl-coated mesh costs more than galvanized.

What nearby projects cost in Corpus Christi

Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Corpus Christi wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−8%) and wood fence lowest (−11%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Wood fence150 linear ft$2,700 – $6,850−11%
Vinyl fence150 linear ft$4,200 – $8,350−8%
Aluminum fence150 linear ft$3,450 – $10,400−9%
Gravel driveway1,000 sq ft$2,250 – $9,150−10%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,600 to $4,200 for Corpus Christi, TX is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Corpus Christi, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Chain-link fence in Corpus Christi: your questions

+How much does it cost to install a chain-link fence in Corpus Christi?

For 150 linear ft, expect $1,400 to $5,400 in the Corpus Christi area. A standard-spec job lands at $2,600 to $4,200. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for chain-link fence in Corpus Christi?

About $9.05 to $35 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $10 to $40.

+Is chain-link fence cheaper in Corpus Christi or McAllen?

McAllen is 115 miles away. The midpoint for 150 linear ft there is $3,100, which is 10% less than Corpus Christi ($3,400). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Corpus Christi?

About 58% at the midpoint, or $2,000 out of $3,400. Materials are 39% and permits 3%. Nationally, labor is 60%.

+What would 200 ft (200 linear ft) cost in Corpus Christi?

$1,850 to $7,200. Pick a different size in the estimator above to get your own number.

+Does chain-link fence need a permit in Corpus Christi?

Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Corpus Christi area (our national range of $40 to $150 scaled by the local price level).

+Is Corpus Christi expensive for chain-link fence compared with the rest of Texas?

Corpus Christi is 1% below the Texas statewide estimate ($3,450 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do construction laborers earn in Corpus Christi?

The BLS median is $20.40 an hour in the Corpus Christi area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.27 to $23.05.

+What do basic and premium chain-link fence work cost in Corpus Christi?

For 150 linear ft, basic work runs $1,400 to $3,000 and premium work $3,800 to $5,400. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.

+When is the best time to install a chain-link fence in Corpus Christi?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Corpus Christi?

$70 to $890, from a national range scaled by the local wage and goods indexes.

Chain-link fence near Corpus Christi

Chain-link fence: all pricesChain-link fence in TexasAll projects in Corpus ChristiTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).