Asphalt driveway cost in Janesville, WI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,150 – $7,800
- Per sq ft
- $5.15 – $12.50
- before permit
- Versus US midpoint
- +5%
- US $5,250
- Rank of 300 metros
- #83
- 1 = most expensive
If you want to pave a driveway in Janesville, plan on $3,150 to $7,800 for 600 sq ft, all in. Per sq ft, that is $5.15 to $12.50 for materials and labor, with the permit on top. The local midpoint runs 5% higher than the national one. Paving, surfacing and tamping equipment operators earn a median of $33.18 an hour in the Janesville area, 29% above the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Janesville, WI, standard level
$4,550 to $6,400
About $7.40 to $10.50 per sq ft before permits. Labor is about 47% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $3,150 |
| Labor | $2,050 | $3,100 |
| Permits and fees | $90 | $150 |
| Total | $4,550 | $6,400 |
Cost breakdown for 600 sq ft in Janesville, WI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,850 | $2,800 | $3,700 | 51% |
| Labor | $1,250 | $2,550 | $3,900 | 47% |
| Permits and fees | $45 | $120 | $190 | 2% |
| Total | $3,150 | $5,450 | $7,800 | 100% |
What is behind the Janesville number
We price the labor side from BLS wage data for 3 trades: paving, surfacing and tamping equipment operators at 40%, construction laborers at 30%, operating engineers and other construction equipment operators at 30%. Weighted together, Janesville wages are 1.20 times the national level. Labor makes up about 47% of the midpoint estimate (41% at national prices). BLS does not publish this trade for the metro, so we used the Wisconsin statewide median.
On the materials line, the BEA goods price index for the Janesville metro is 93.8 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,800, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (93.7) and land at $45 to $190.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Janesville. The wage table below marks each row.
Janesville labor market for asphalt driveway
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Janesville is 1.20 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Janesville metro, so we used the Wisconsin statewide median: $33.18 an hour against $25.64 for the US. The middle half of them earn between $24.22 and $43.86 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $26.77 an hour, 18% above the US median of $22.66. The middle half of them earn between $22.00 and $36.28 an hour. About 480 work in the metro. That is 68.7 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $31.88 an hour, which is 11% above the national $28.78. The middle half of them earn between $27.94 and $44.34 an hour. BLS counts 240 of them working in the area, 34.3 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($43.86 an hour) instead of the median, the labor line grows by about $350. At the 25th percentile ($24.22) it shrinks by about $300. The total moves by 6.5% or 5.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 69,870 jobs in the Janesville-Beloit area. That makes it the 260th largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $24.22 | $33.18 | $43.86 | $25.64 | 1.29 | state |
| Construction laborers (47-2061) | 30% | $22.00 | $26.77 | $36.28 | $22.66 | 1.18 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $27.94 | $31.88 | $44.34 | $28.78 | 1.11 | metro |
| Blended | 100% | 1.20 | |||||
Why two Janesville quotes can differ
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Climate in Janesville: timing your asphalt driveway job
We use NOAA's 1991-2020 climate normals for Afton - Janesville Wwtp (5 miles from the city center). These are 30-year monthly averages, not forecasts.
April through October is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Janesville (7 of 12 months). January, February, March, November and December have an average overnight low at or below freezing (32°F).
In January, February, March, November and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 148 days a year with a low at or below 32°F at this station.
Janesville gets about 37 inches of precipitation in a normal year, including roughly 37 inches of snow. The wettest months are June, July and August (5.0 inches in June). Inside the workable window, April and October are the driest, at 3.6 and 3.0 inches. The station averages about 13 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 28 | 12 | 1.6 | Cold |
| Feb | 32 | 15 | 1.6 | Cold |
| Mar | 45 | 25 | 2.1 | Cold |
| Apr | 58 | 36 | 3.6 | Workable |
| May | 70 | 48 | 4.1 | Workable |
| Jun | 80 | 58 | 5.0 | Workable |
| Jul | 83 | 62 | 4.2 | Workable |
| Aug | 82 | 60 | 4.3 | Workable |
| Sep | 75 | 51 | 3.7 | Workable |
| Oct | 62 | 40 | 3.0 | Workable |
| Nov | 46 | 29 | 2.3 | Cold |
| Dec | 34 | 18 | 1.9 | Cold |
Related projects, priced for Janesville
Because every project leans on different trades, Janesville's wage level does not move all prices equally. Against the US midpoint, concrete driveway runs +17% and gravel driveway +4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $4,150 – $10,800 | +17% |
| Gravel driveway | 1,000 sq ft | $2,600 – $10,600 | +4% |
| Paver patio | 300 sq ft | $3,250 – $5,900 | +8% |
| French drain | 60 linear ft | $670 – $2,350 | +11% |
| Concrete slab | 400 sq ft | $2,700 – $5,550 | +8% |
| Concrete patio | 300 sq ft | $1,300 – $4,500 | +11% |
Optional extras in Janesville
Extras are quoted nationally and then scaled to Janesville by the average of the local wage index (1.20) and goods index (0.94), a factor of 1.07. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $640 – $1,300 |
Janesville: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Janesville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$3,150 to $5,000
New topcoat over a sound base, flat lot
Standard
$4,550 to $6,400
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,950 to $7,800
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,300 – $2,050 | $1,850 – $2,650 | $2,450 – $3,250 |
| 20x20 (400 sq ft) | $2,100 – $3,350 | $3,050 – $4,300 | $4,000 – $5,250 |
| 2-car (20x30), 600 sq ft | $3,150 – $5,000 | $4,550 – $6,400 | $5,950 – $7,800 |
| long rural (10x100), 1,000 sq ft | $5,200 – $8,250 | $7,500 – $10,600 | $9,800 – $12,900 |
Janesville against nearby metros and the rest of Wisconsin
Of the five closest metros, none is cheaper than Janesville. Racine comes closest at about $5,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Janesville, WIthis page | $3,150 – $7,800 | $5,450 | |
| Rockford, IL25 miles | $3,350 – $8,450 | $5,900 | +8% |
| Madison, WI40 miles | $3,400 – $8,700 | $6,050 | +11% |
| Kenosha, WI60 miles | $3,400 – $8,300 | $5,850 | +7% |
| Milwaukee, WI65 miles | $3,300 – $8,400 | $5,850 | +7% |
| Racine, WI65 miles | $3,250 – $8,150 | $5,700 | +4% |
| Wisconsin (statewide) | $3,200 – $8,000 | $5,600 | +2% |
| United States | $3,050 – $7,400 | $5,250 | −4% |
Across 300 US metros, Janesville comes in at #83 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Janesville is 2% below the Wisconsin figure.
Other Wisconsin metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Milwaukee, WI | 820,780 jobs | $3,300 – $8,400 | $5,850 | +7% |
| Madison, WI | 408,070 jobs | $3,400 – $8,700 | $6,050 | +11% |
| Green Bay, WI | 174,550 jobs | $3,050 – $7,500 | $5,250 | −4% |
| Appleton, WI | 124,230 jobs | $3,300 – $8,350 | $5,850 | +7% |
| Oshkosh, WI | 93,750 jobs | $3,150 – $7,900 | $5,500 | +1% |
| Eau Claire, WI | 86,060 jobs | $3,200 – $8,000 | $5,600 | +3% |
Cities with a workforce like Janesville's
Big cities and small ones price differently, so here is Janesville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lexington Park, MD | 70,650 jobs | $3,100 – $7,550 | $5,300 | −3% |
| Wausau, WI | 69,530 jobs | $3,250 – $8,150 | $5,700 | +4% |
| Bismarck, ND | 71,270 jobs | $3,000 – $7,300 | $5,150 | −6% |
| Yuma, AZ | 68,880 jobs | $2,900 – $7,050 | $4,950 | −9% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,550 to $6,400 for Janesville, WI is attached.
Detailed asphalt driveway report for Janesville, WI, $9
Multi-page report for Janesville, WI: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Janesville: your questions
+How much does it cost to pave a driveway in Janesville?
For 600 sq ft, expect $3,150 to $7,800 in the Janesville area. A standard-spec job lands at $4,550 to $6,400. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Janesville?
About $5.15 to $12.50 per sq ft for materials and labor, plus $45 to $190 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Janesville or Rockford?
Rockford is 25 miles away. The midpoint for 600 sq ft there is $5,900, which is 8% more than Janesville ($5,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Janesville?
About 47% at the midpoint, or $2,550 out of $5,450. Materials are 51% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Janesville?
$3,150 to $7,800. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Janesville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $190 for fees in the Janesville area (our national range of $50 to $200 scaled by the local price level).
+Is Janesville expensive for asphalt driveway compared with the rest of Wisconsin?
Janesville is 2% below the Wisconsin statewide estimate ($5,600 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Janesville?
BLS has no published metro figure here, so we use the statewide median of $33.18 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $24.22 to $43.86.
+What do basic and premium asphalt driveway work cost in Janesville?
For 600 sq ft, basic work runs $3,150 to $5,000 and premium work $5,950 to $7,800. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Janesville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Janesville?
$640 to $1,300 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Janesville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.