Asphalt driveway cost in Yuma, AZ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,900 – $7,050
- Per sq ft
- $4.75 – $11.50
- before permit
- Versus US midpoint
- −5%
- US $5,250
- Rank of 300 metros
- #184
- 1 = most expensive
Yuma homeowners pay roughly $2,900 to $7,050 to pave a driveway at 600 sq ft, or $4.75 to $11.50 per sq ft (permit not included). Against the US midpoint, Yuma is 5% lower. Paving, surfacing and tamping equipment operators earn a median of $25.07 an hour in the Yuma area, 2% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Yuma, AZ, standard level
$4,150 to $5,800
About $6.75 to $9.40 per sq ft before permits. Labor is about 40% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,600 | $2,400 |
| Permits and fees | $90 | $140 |
| Total | $4,150 | $5,800 |
Cost breakdown for 600 sq ft in Yuma, AZ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,800 | 57% |
| Labor | $960 | $2,000 | $3,050 | 40% |
| Permits and fees | $45 | $120 | $190 | 2% |
| Total | $2,900 | $4,950 | $7,050 | 100% |
Why Yuma prices look the way they do
Labor is 40% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Yuma the blended ratio comes out at 0.94. BLS does not publish this trade for the metro, so we used the Arizona statewide median.
On the materials line, the BEA goods price index for the Yuma metro is 96.2 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (92.7) and land at $45 to $190.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Yuma. The wage table below marks each row.
Pick a size, pick a tier: asphalt driveway pricing in Yuma
Three bands are cut from the same cited range and localized for Yuma wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,900 to $4,550
New topcoat over a sound base, flat lot
Standard
$4,150 to $5,800
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,400 to $7,050
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,200 – $1,900 | $1,700 – $2,400 | $2,250 – $2,950 |
| 20x20 (400 sq ft) | $1,950 – $3,050 | $2,800 – $3,900 | $3,650 – $4,750 |
| 2-car (20x30), 600 sq ft | $2,900 – $4,550 | $4,150 – $5,800 | $5,400 – $7,050 |
| long rural (10x100), 1,000 sq ft | $4,800 – $7,550 | $6,850 – $9,550 | $8,900 – $11,600 |
Is Yuma cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $4,950 to $6,050 across Yuma and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Yuma, AZthis page | $2,900 – $7,050 | $4,950 | |
| El Centro, CA85 miles | $3,500 – $8,650 | $6,050 | +22% |
| Phoenix, AZ110 miles | $3,000 – $7,300 | $5,150 | +3% |
| Tucson, AZ130 miles | $2,950 – $7,150 | $5,050 | +1% |
| Prescott Valley, AZ150 miles | $2,950 – $7,200 | $5,100 | +2% |
| San Diego, CA165 miles | $3,500 – $8,600 | $6,050 | +22% |
| Arizona (statewide) | $2,950 – $7,200 | $5,050 | +2% |
| United States | $3,050 – $7,400 | $5,250 | +5% |
Across 300 US metros, Yuma comes in at #184 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Yuma is 2% below the Arizona figure.
Other Arizona metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Phoenix, AZ | 2,375,760 jobs | $3,000 – $7,300 | $5,150 | +3% |
| Tucson, AZ | 389,630 jobs | $2,950 – $7,150 | $5,050 | +1% |
| Prescott Valley, AZ | 72,300 jobs | $2,950 – $7,200 | $5,100 | +2% |
| Flagstaff, AZ | 66,610 jobs | $2,950 – $7,200 | $5,050 | +2% |
| Lake Havasu City, AZ | 56,490 jobs | $2,900 – $7,000 | $4,950 | −1% |
Cities with a workforce like Yuma's
Big cities and small ones price differently, so here is Yuma against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Wausau, WI | 69,530 jobs | $3,250 – $8,150 | $5,700 | +14% |
| State College, PA | 68,840 jobs | $3,150 – $7,650 | $5,400 | +8% |
| Janesville, WI | 69,870 jobs | $3,150 – $7,800 | $5,450 | +10% |
| Traverse City, MI | 68,440 jobs | $2,950 – $7,200 | $5,100 | +2% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Yuma is 0.94 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Yuma metro, so we used the Arizona statewide median: $25.07 an hour against $25.64 for the US. The middle half of them earn between $23.97 and $36.40 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $20.80 an hour, 8% below the US median of $22.66. The middle half of them earn between $17.60 and $22.84 an hour. About 570 work in the metro. That is 82.8 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $26.09 an hour, which is 9% below the national $28.78. The middle half of them earn between $22.99 and $28.47 an hour. BLS counts 180 of them working in the area, 26.1 for every 10,000 jobs (US: 30.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($36.40 an hour) instead of the median, the labor line grows by about $380. At the 25th percentile ($23.97) it shrinks by about $35. The total moves by 7.6% or 0.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 68,880 jobs in the Yuma area. That makes it the 262nd largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $23.97 | $25.07 | $36.40 | $25.64 | 0.98 | state |
| Construction laborers (47-2061) | 30% | $17.60 | $20.80 | $22.84 | $22.66 | 0.92 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $22.99 | $26.09 | $28.47 | $28.78 | 0.91 | metro |
| Blended | 100% | 0.94 | |||||
When to schedule asphalt driveway in Yuma
We use NOAA's 1991-2020 climate normals for Yuma Mcas (10 miles from the city center). These are 30-year monthly averages, not forecasts.
November through April is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Yuma (6 of 12 months). May, June, July, August, September and October have an average daytime high of 90°F or more.
Yuma gets about 3 inches of precipitation in a normal year. The wettest months are January, September and December (0.7 inches in September). Inside the workable window, April and November are the driest, at 0.1 and 0.2 inches. The station averages about 181 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 70 | 48 | 0.4 | Workable |
| Feb | 73 | 50 | 0.4 | Workable |
| Mar | 80 | 55 | 0.4 | Workable |
| Apr | 86 | 60 | 0.1 | Workable |
| May | 94 | 67 | 0.1 | Hot |
| Jun | 103 | 75 | 0.0 | Hot |
| Jul | 107 | 83 | 0.2 | Hot |
| Aug | 106 | 83 | 0.2 | Hot |
| Sep | 101 | 78 | 0.7 | Hot |
| Oct | 90 | 66 | 0.1 | Hot |
| Nov | 78 | 54 | 0.2 | Workable |
| Dec | 68 | 47 | 0.4 | Workable |
Optional extras in Yuma
Extras are quoted nationally and then scaled to Yuma by the average of the local wage index (0.94) and goods index (0.96), a factor of 0.95. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $570 – $1,150 |
Related projects, priced for Yuma
Because every project leans on different trades, Yuma's wage level does not move all prices equally. Against the US midpoint, French drain runs −2% and concrete driveway −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,300 – $8,250 | −10% |
| Gravel driveway | 1,000 sq ft | $2,350 – $9,550 | −6% |
| Paver patio | 300 sq ft | $2,850 – $5,100 | −6% |
| French drain | 60 linear ft | $590 – $2,050 | −2% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
| Concrete patio | 300 sq ft | $1,150 – $3,650 | −9% |
Why two Yuma quotes can differ
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,150 to $5,800 for Yuma, AZ is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Yuma, AZ: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Yuma: your questions
+How much does it cost to pave a driveway in Yuma?
For 600 sq ft, expect $2,900 to $7,050 in the Yuma area. A standard-spec job lands at $4,150 to $5,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Yuma?
About $4.75 to $11.50 per sq ft for materials and labor, plus $45 to $190 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Yuma or El Centro?
El Centro is 85 miles away. The midpoint for 600 sq ft there is $6,050, which is 22% more than Yuma ($4,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Yuma?
About 40% at the midpoint, or $2,000 out of $4,950. Materials are 57% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Yuma?
$2,900 to $7,050. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Yuma?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $190 for fees in the Yuma area (our national range of $50 to $200 scaled by the local price level).
+Is Yuma expensive for asphalt driveway compared with the rest of Arizona?
Yuma is 2% below the Arizona statewide estimate ($5,050 at the midpoint). We cover 6 metros in Arizona; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Yuma?
BLS has no published metro figure here, so we use the statewide median of $25.07 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $23.97 to $36.40.
+What do basic and premium asphalt driveway work cost in Yuma?
For 600 sq ft, basic work runs $2,900 to $4,550 and premium work $5,400 to $7,050. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Yuma?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are November through April. April and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Yuma?
$570 to $1,150 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Yuma
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.