Asphalt driveway cost in Oklahoma
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (600 sq ft)
- $2,750 – $6,600
- Per sq ft
- $4.55 – $10.50
- before permit
- Versus US midpoint
- −10%
- US $5,250
- Metros covered
- 2
What does it cost to pave a driveway in Oklahoma? Plan on $2,750 to $6,600 for 600 sq ft. Wages (0.84x the US blend), materials (price index 93.8) and permit costs (87.8) put the state below the national midpoint by 10%.
Inside Oklahoma, the metros we cover range from $4,700 (Oklahoma City) to $4,750 (Tulsa) at the midpoint.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Oklahoma (statewide), standard level
$3,900 to $5,450
About $6.40 to $8.85 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $3,150 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $85 | $140 |
| Total | $3,900 | $5,450 |
Cost breakdown for 600 sq ft in Oklahoma
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,850 | $2,800 | $3,700 | 59% |
| Labor | $860 | $1,800 | $2,750 | 38% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $2,750 | $4,700 | $6,600 | 100% |
What paving, surfacing and tamping equipment operators and the other trades earn in Oklahoma
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.84 for Oklahoma.
For paving, surfacing and tamping equipment operators (47-2071, weighted 40%) the local median is $22.48 an hour, which is 12% below the national $25.64. The middle half of them earn between $21.48 and $24.15 an hour. BLS counts 550 of them working in the state, 3.2 for every 10,000 jobs (US: 2.7), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $18.92 an hour, 17% below the US median of $22.66. The middle half of them earn between $17.54 and $22.82 an hour. About 13,710 work in the state. That is 80.3 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.06 an hour, which is 20% below the national $28.78. The middle half of them earn between $20.15 and $27.26 an hour. BLS counts 7,050 of them working in the state, 41.3 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.
A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($24.15 an hour) would add about $55 to the statewide midpoint; one at the 25th percentile ($21.48) would take off about $35. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 1,707,680 jobs across Oklahoma (May 2025), which is 1.1% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $21.48 | $22.48 | $24.15 | $25.64 | 0.88 | state |
| Construction laborers (47-2061) | 30% | $17.54 | $18.92 | $22.82 | $22.66 | 0.83 | state |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $20.15 | $23.06 | $27.26 | $28.78 | 0.80 | state |
| Blended | 100% | 0.84 | |||||
Add-ons priced for Oklahoma
Extras are quoted nationally and then scaled to Oklahoma by the average of the local wage index (0.84) and goods index (0.94), a factor of 0.89. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $530 – $1,050 |
Oklahoma versus the states around it
Oklahoma ranks 48 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. Oklahoma sits at $4,700. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Kansas | 160 miles away | $2,850 – $6,850 | $4,850 | +3% |
| Arkansas | 220 miles away | $2,700 – $6,450 | $4,600 | −2% |
| Missouri | 320 miles away | $3,150 – $7,850 | $5,500 | +17% |
| Texas | 330 miles away | $2,850 – $6,900 | $4,900 | +4% |
| Nebraska | 380 miles away | $2,850 – $6,950 | $4,900 | +5% |
Oklahoma metro-by-metro prices
2 of the 2 metros sit above the statewide midpoint of $4,700, and the top-to-bottom gap is 1%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (600 sq ft) | Midpoint | vs. state |
|---|---|---|---|
| Tulsa, OK | $2,800 – $6,700 | $4,750 | +1% |
| Oklahoma City, OK | $2,800 – $6,650 | $4,700 | +1% |
Related projects, priced for Oklahoma
The table prices neighboring jobs at their usual sizes using statewide Oklahoma wages and prices. Against national midpoints, French drain comes out highest (−11%) and concrete driveway lowest (−15%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,150 – $7,750 | −15% |
| Gravel driveway | 1,000 sq ft | $2,200 – $8,950 | −12% |
| Paver patio | 300 sq ft | $2,650 – $4,800 | −12% |
| French drain | 60 linear ft | $530 – $1,850 | −11% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Concrete patio | 300 sq ft | $1,100 – $3,450 | −13% |
Quality levels and sizes in Oklahoma
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Oklahoma wages and prices. The grid prices the same bands at 4 common sizes.
Basic
$2,750 to $4,300
New topcoat over a sound base, flat lot
Standard
$3,900 to $5,450
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,050 to $6,600
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,800 | $1,600 – $2,250 | $2,100 – $2,750 |
| 20x20 (400 sq ft) | $1,850 – $2,900 | $2,650 – $3,700 | $3,400 – $4,450 |
| 2-car (20x30), 600 sq ft | $2,750 – $4,300 | $3,900 – $5,450 | $5,050 – $6,600 |
| long rural (10x100), 1,000 sq ft | $4,550 – $7,100 | $6,450 – $9,000 | $8,350 – $10,900 |
Asphalt driveway: what moves the price in Oklahoma
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
Oklahoma seasons and asphalt driveway
Season matters for asphalt driveway. For each Oklahoma metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for digging and ground work.
Every Oklahoma metro on the list has 7 comfortable months, though rainfall ranges from 36 inches a year in Oklahoma City to 41 in Tulsa.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Oklahoma City | 27 | 93 | 36 | 7: March through June and September through November |
| Tulsa | 28 | 94 | 41 | 7: March through June and September through November |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,900 to $5,450 for Oklahoma is attached.
A detailed PDF report of this estimate, $9
The report lays out the asphalt driveway numbers for Oklahoma line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Oklahoma: your questions
+How much does it cost to pave a driveway in Oklahoma?
$2,750 to $6,600 for 600 sq ft, using statewide wages and prices. Metro areas inside Oklahoma can sit above or below that.
+Which city in Oklahoma is cheapest for asphalt driveway?
Oklahoma City at about $4,700 (midpoint, 600 sq ft). The priciest is Tulsa at $4,750.
+Is asphalt driveway cheaper in Oklahoma than the US average?
It is 10% cheaper: $4,700 against $5,250 for 600 sq ft at the midpoint.
+What share of the price is labor in Oklahoma?
About 38% ($1,800). Materials are 59%. Statewide labor for this job is weighted 0.84x the national wage level.
+What do paving, surfacing and tamping equipment operators earn in Oklahoma?
The BLS statewide median is $22.48 an hour, against $25.64 for the US. The 25th to 75th percentile range is $21.48 to $24.15.
+Where does Oklahoma rank for asphalt driveway costs?
48th most expensive of 51 (the 50 states plus DC) at the midpoint, $4,700 for 600 sq ft. Rank 1 is the costliest.
+What do basic and premium asphalt driveway work cost in Oklahoma?
For 600 sq ft, basic work runs $2,750 to $4,300 and premium work $5,050 to $6,600. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+Does the season matter for asphalt driveway in Oklahoma?
Yes where winters or summers are hard. Of the Oklahoma metros we cover, Oklahoma City has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add a sealcoat" add in Oklahoma?
$530 to $1,050 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.
Asphalt driveway by city in Oklahoma
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.