Asphalt driveway cost in Port St. Lucie, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,850 – $6,800
- Per sq ft
- $4.65 – $11
- before permit
- Versus US midpoint
- −7%
- US $5,250
- Rank of 300 metros
- #227
- 1 = most expensive
Local price for an asphalt driveway in the Port St. Lucie area: $2,850 to $6,800 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% lower than the US figure. Paving, surfacing and tamping equipment operators earn a median of $22.52 an hour in the Port St. Lucie area, 12% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Port St. Lucie, FL, standard level
$4,050 to $5,650
About $6.55 to $9.10 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,450 | $2,250 |
| Permits and fees | $95 | $160 |
| Total | $4,050 | $5,650 |
Cost breakdown for 600 sq ft in Port St. Lucie, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,800 | 59% |
| Labor | $890 | $1,850 | $2,800 | 38% |
| Permits and fees | $50 | $130 | $200 | 3% |
| Total | $2,850 | $4,850 | $6,800 | 100% |
Why Port St. Lucie prices look the way they do
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $22.52 an hour. Add the other trades involved and the blended wage index for Port St. Lucie is 0.87 (US = 1.00), which puts labor at 38% of the total. BLS does not publish this trade for the metro, so we used the Florida statewide median.
Materials are scaled with BEA's regional price parity for goods. Port St. Lucie is at 96.2 against 100 for the US, so a materials line of $2,950 nationally becomes $2,850 here (midpoint, 600 sq ft). Permits follow the all-items index of 100.2: $50 to $200.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Port St. Lucie. The wage table below marks each row.
Specs and site conditions that change a Port St. Lucie bid
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Port St. Lucie against nearby metros and the rest of Florida
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $4,750 to $5,150 across Port St. Lucie and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Port St. Lucie, FLthis page | $2,850 – $6,800 | $4,850 | |
| Sebastian, FL35 miles | $2,850 – $6,900 | $4,850 | +1% |
| Palm Bay, FL75 miles | $2,850 – $6,850 | $4,850 | +1% |
| Miami, FL80 miles | $3,050 – $7,250 | $5,150 | +6% |
| Lakeland, FL90 miles | $2,800 – $6,650 | $4,750 | −2% |
| Naples, FL95 miles | $2,900 – $7,000 | $4,950 | +2% |
| Florida (statewide) | $2,900 – $6,950 | $4,900 | +2% |
| United States | $3,050 – $7,400 | $5,250 | +8% |
Out of the 300 metros we cover, Port St. Lucie ranks #227 for the cost of this job (#1 is the most expensive). Statewide, Port St. Lucie is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,050 – $7,250 | $5,150 | +6% |
| Tampa, FL | 1,447,120 jobs | $2,850 – $6,850 | $4,850 | level |
| Orlando, FL | 1,411,730 jobs | $2,850 – $6,850 | $4,850 | level |
| Jacksonville, FL | 765,930 jobs | $2,850 – $6,850 | $4,850 | level |
| North Port, FL | 339,940 jobs | $2,850 – $6,950 | $4,900 | +1% |
| Cape Coral, FL | 304,790 jobs | $2,850 – $6,850 | $4,850 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Port St. Lucie against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Visalia, CA | 171,140 jobs | $3,400 – $8,350 | $5,850 | +21% |
| Fort Collins, CO | 169,430 jobs | $3,050 – $7,550 | $5,300 | +10% |
| Mobile, AL | 172,550 jobs | $2,750 – $6,550 | $4,650 | −4% |
| Atlantic City, NJ | 168,700 jobs | $3,150 – $7,650 | $5,400 | +12% |
What nearby projects cost in Port St. Lucie
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Port St. Lucie wage and price inputs. Compared with national midpoints, French drain comes out highest (−7%) and concrete driveway lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,300 – $8,150 | −11% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,300 | −9% |
| Paver patio | 300 sq ft | $2,750 – $5,050 | −8% |
| French drain | 60 linear ft | $560 – $1,950 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
| Concrete patio | 300 sq ft | $1,150 – $3,650 | −9% |
Optional extras in Port St. Lucie
Add-ons start from national price ranges and are scaled by 0.92 for Port St. Lucie, which is the average of the area's wage index (0.87) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $550 – $1,100 |
The best months for asphalt driveway in Port St. Lucie
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Ft Pierce St Lucie Co Intl Ap (15 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Port St. Lucie are September through June: 10 of 12. Outside them, July and August have an average daytime high of 90°F or more.
Port St. Lucie gets about 51 inches of precipitation in a normal year. The wettest months are June, August and September (6.9 inches in August). Inside the workable window, February and December are the driest, at 2.2 and 2.3 inches. The station averages about 67 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 73 | 51 | 2.8 | Workable |
| Feb | 76 | 54 | 2.2 | Workable |
| Mar | 78 | 57 | 2.9 | Workable |
| Apr | 82 | 61 | 3.0 | Workable |
| May | 86 | 67 | 3.9 | Workable |
| Jun | 89 | 71 | 6.7 | Workable |
| Jul | 90 | 73 | 5.8 | Hot |
| Aug | 90 | 73 | 6.9 | Hot |
| Sep | 88 | 73 | 6.3 | Workable |
| Oct | 84 | 69 | 5.3 | Workable |
| Nov | 79 | 61 | 3.0 | Workable |
| Dec | 75 | 56 | 2.3 | Workable |
Cost by quality level and size in Port St. Lucie
The cited range is split into basic, standard and premium bands, then scaled to Port St. Lucie. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$2,850 to $4,450
New topcoat over a sound base, flat lot
Standard
$4,050 to $5,650
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,250 to $6,800
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,850 | $1,650 – $2,350 | $2,200 – $2,850 |
| 20x20 (400 sq ft) | $1,900 – $3,000 | $2,700 – $3,800 | $3,550 – $4,600 |
| 2-car (20x30), 600 sq ft | $2,850 – $4,450 | $4,050 – $5,650 | $5,250 – $6,800 |
| long rural (10x100), 1,000 sq ft | $4,700 – $7,300 | $6,650 – $9,300 | $8,650 – $11,200 |
Who does the work: Port St. Lucie trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Port St. Lucie the blend is 0.87.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Port St. Lucie metro, so we used the Florida statewide median: $22.52 an hour against $25.64 for the US. The middle half of them earn between $19.30 and $24.97 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $20.65 an hour, which is 9% below the national $22.66. The middle half of them earn between $17.85 and $22.86 an hour. BLS counts 2,310 of them working in the area, 135.2 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $23.37 an hour, 19% below the US median of $28.78. The middle half of them earn between $22.25 and $27.74 an hour. About 610 work in the metro. That is 35.7 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $80 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 2.2% to 1.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Port St. Lucie has 170,820 jobs in total (BLS, May 2025), ranking 137th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $19.30 | $22.52 | $24.97 | $25.64 | 0.88 | state |
| Construction laborers (47-2061) | 30% | $17.85 | $20.65 | $22.86 | $22.66 | 0.91 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $22.25 | $23.37 | $27.74 | $28.78 | 0.81 | metro |
| Blended | 100% | 0.87 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,050 to $5,650 for Port St. Lucie, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Port St. Lucie, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Port St. Lucie: your questions
+How much does it cost to pave a driveway in Port St. Lucie?
For 600 sq ft, expect $2,850 to $6,800 in the Port St. Lucie area. A standard-spec job lands at $4,050 to $5,650. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Port St. Lucie?
About $4.65 to $11 per sq ft for materials and labor, plus $50 to $200 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Port St. Lucie or Sebastian?
Sebastian is 35 miles away. The midpoint for 600 sq ft there is $4,850, which is 1% more than Port St. Lucie ($4,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Port St. Lucie?
About 38% at the midpoint, or $1,850 out of $4,850. Materials are 59% and permits 3%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Port St. Lucie?
$2,850 to $6,800. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Port St. Lucie?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $200 for fees in the Port St. Lucie area (our national range of $50 to $200 scaled by the local price level).
+Is Port St. Lucie expensive for asphalt driveway compared with the rest of Florida?
Port St. Lucie is 2% below the Florida statewide estimate ($4,900 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Port St. Lucie?
BLS has no published metro figure here, so we use the statewide median of $22.52 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $19.30 to $24.97.
+What do basic and premium asphalt driveway work cost in Port St. Lucie?
For 600 sq ft, basic work runs $2,850 to $4,450 and premium work $5,250 to $6,800. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Port St. Lucie?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Port St. Lucie?
$550 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Port St. Lucie
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.