Asphalt driveway cost in Jacksonville, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,850 – $6,850
- Per sq ft
- $4.65 – $11
- before permit
- Versus US midpoint
- −7%
- US $5,250
- Rank of 300 metros
- #219
- 1 = most expensive
Jacksonville homeowners pay roughly $2,850 to $6,850 to pave a driveway at 600 sq ft, or $4.65 to $11 per sq ft (permit not included). Against the US midpoint, Jacksonville is 7% lower. Paving, surfacing and tamping equipment operators earn a median of $22.74 an hour in the Jacksonville area, 11% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Jacksonville, FL, standard level
$4,050 to $5,650
About $6.60 to $9.15 per sq ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,500 | $2,250 |
| Permits and fees | $95 | $150 |
| Total | $4,050 | $5,650 |
Cost breakdown for 600 sq ft in Jacksonville, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,800 | 59% |
| Labor | $890 | $1,850 | $2,850 | 39% |
| Permits and fees | $50 | $120 | $200 | 3% |
| Total | $2,850 | $4,850 | $6,850 | 100% |
What is behind the Jacksonville number
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $22.74 an hour. Add the other trades involved and the blended wage index for Jacksonville is 0.88 (US = 1.00), which puts labor at 39% of the total.
On the materials line, the BEA goods price index for the Jacksonville metro is 96.2 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (99.5) and land at $50 to $200.
Jacksonville against nearby metros and the rest of Florida
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $4,700 to $4,850 across Jacksonville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Jacksonville, FLthis page | $2,850 – $6,850 | $4,850 | |
| Ocala, FL75 miles | $2,800 – $6,700 | $4,750 | −2% |
| Gainesville, FL75 miles | $2,800 – $6,750 | $4,800 | −1% |
| Deltona, FL80 miles | $2,850 – $6,900 | $4,850 | level |
| Orlando, FL125 miles | $2,850 – $6,850 | $4,850 | level |
| Savannah, GA135 miles | $2,800 – $6,650 | $4,700 | −3% |
| Florida (statewide) | $2,900 – $6,950 | $4,900 | +1% |
| United States | $3,050 – $7,400 | $5,250 | +8% |
Across 300 US metros, Jacksonville comes in at #219 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Jacksonville is 1% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,050 – $7,250 | $5,150 | +6% |
| Tampa, FL | 1,447,120 jobs | $2,850 – $6,850 | $4,850 | level |
| Orlando, FL | 1,411,730 jobs | $2,850 – $6,850 | $4,850 | level |
| North Port, FL | 339,940 jobs | $2,850 – $6,950 | $4,900 | +1% |
| Cape Coral, FL | 304,790 jobs | $2,850 – $6,850 | $4,850 | level |
| Lakeland, FL | 265,280 jobs | $2,800 – $6,650 | $4,750 | −2% |
Cities with a workforce like Jacksonville's
Big cities and small ones price differently, so here is Jacksonville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Milwaukee, WI | 820,780 jobs | $3,300 – $8,400 | $5,850 | +21% |
| Virginia Beach, VA | 763,060 jobs | $2,850 – $6,800 | $4,800 | −1% |
| Salt Lake City, UT | 826,210 jobs | $3,050 – $7,500 | $5,300 | +9% |
| Raleigh, NC | 743,120 jobs | $2,900 – $6,950 | $4,950 | +2% |
Cost by quality level and size in Jacksonville
Three bands are cut from the same cited range and localized for Jacksonville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,850 to $4,450
New topcoat over a sound base, flat lot
Standard
$4,050 to $5,650
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,250 to $6,850
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,850 | $1,700 – $2,350 | $2,200 – $2,850 |
| 20x20 (400 sq ft) | $1,900 – $3,000 | $2,750 – $3,800 | $3,550 – $4,650 |
| 2-car (20x30), 600 sq ft | $2,850 – $4,450 | $4,050 – $5,650 | $5,250 – $6,850 |
| long rural (10x100), 1,000 sq ft | $4,700 – $7,350 | $6,700 – $9,300 | $8,650 – $11,300 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Jacksonville is 0.88 times the national level.
For paving, surfacing and tamping equipment operators (47-2071, weighted 40%) the local median is $22.74 an hour, which is 11% below the national $25.64. The middle half of them earn between $20.07 and $24.37 an hour. BLS counts 220 of them working in the area, 2.9 for every 10,000 jobs (US: 2.7), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $20.90 an hour, 8% below the US median of $22.66. The middle half of them earn between $17.68 and $23.16 an hour. About 7,150 work in the metro. That is 93.4 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.52 an hour, which is 18% below the national $28.78. The middle half of them earn between $22.49 and $28.15 an hour. BLS counts 1,990 of them working in the area, 26.0 for every 10,000 jobs (US: 30.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($24.37 an hour) instead of the median, the labor line grows by about $55. At the 25th percentile ($20.07) it shrinks by about $90. The total moves by 1.1% or 1.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 765,930 jobs in the Jacksonville area. That makes it the 39th largest of the 300 metros we cover, with 0.49% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $20.07 | $22.74 | $24.37 | $25.64 | 0.89 | metro |
| Construction laborers (47-2061) | 30% | $17.68 | $20.90 | $23.16 | $22.66 | 0.92 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $22.49 | $23.52 | $28.15 | $28.78 | 0.82 | metro |
| Blended | 100% | 0.88 | |||||
Asphalt driveway: what moves the price in Jacksonville
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Optional extras in Jacksonville
Extras are quoted nationally and then scaled to Jacksonville by the average of the local wage index (0.88) and goods index (0.96), a factor of 0.92. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $550 – $1,100 |
When to schedule asphalt driveway in Jacksonville
We use NOAA's 1991-2020 climate normals for Jacksonville Nas (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Jacksonville (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Jacksonville gets about 48 inches of precipitation in a normal year. The wettest months are June, August and September (7.3 inches in June). Inside the workable window, February and November are the driest, at 2.3 and 2.0 inches. The station averages about 97 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 66 | 47 | 2.9 | Workable |
| Feb | 69 | 50 | 2.3 | Workable |
| Mar | 74 | 55 | 3.1 | Workable |
| Apr | 81 | 61 | 2.4 | Workable |
| May | 86 | 69 | 3.2 | Workable |
| Jun | 90 | 74 | 7.3 | Hot |
| Jul | 92 | 76 | 6.0 | Hot |
| Aug | 91 | 76 | 6.3 | Hot |
| Sep | 88 | 74 | 6.1 | Workable |
| Oct | 82 | 66 | 3.5 | Workable |
| Nov | 73 | 56 | 2.0 | Workable |
| Dec | 68 | 50 | 2.5 | Workable |
Planning more than one job in Jacksonville?
Because every project leans on different trades, Jacksonville's wage level does not move all prices equally. Against the US midpoint, paver patio runs −5% and concrete driveway −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,300 – $8,300 | −10% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,350 | −8% |
| Paver patio | 300 sq ft | $2,850 – $5,150 | −5% |
| French drain | 60 linear ft | $560 – $1,950 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,850 | −7% |
| Concrete patio | 300 sq ft | $1,150 – $3,650 | −8% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,050 to $5,650 for Jacksonville, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Jacksonville, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Jacksonville: your questions
+How much does it cost to pave a driveway in Jacksonville?
For 600 sq ft, expect $2,850 to $6,850 in the Jacksonville area. A standard-spec job lands at $4,050 to $5,650. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Jacksonville?
About $4.65 to $11 per sq ft for materials and labor, plus $50 to $200 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Jacksonville or Ocala?
Ocala is 75 miles away. The midpoint for 600 sq ft there is $4,750, which is 2% less than Jacksonville ($4,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Jacksonville?
About 39% at the midpoint, or $1,850 out of $4,850. Materials are 59% and permits 3%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Jacksonville?
$2,850 to $6,850. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Jacksonville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $200 for fees in the Jacksonville area (our national range of $50 to $200 scaled by the local price level).
+Is Jacksonville expensive for asphalt driveway compared with the rest of Florida?
Jacksonville is 1% below the Florida statewide estimate ($4,900 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Jacksonville?
The BLS median is $22.74 an hour in the Jacksonville area, compared with $25.64 nationally. The 25th to 75th percentile range is $20.07 to $24.37.
+What do basic and premium asphalt driveway work cost in Jacksonville?
For 600 sq ft, basic work runs $2,850 to $4,450 and premium work $5,250 to $6,850. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Jacksonville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Jacksonville?
$550 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Jacksonville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.