Skip to content
CostLocal

Asphalt driveway cost in Orlando, FL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (600 sq ft)
$2,850 – $6,850
Per sq ft
$4.65 – $11
before permit
Versus US midpoint
−7%
US $5,250
Rank of 300 metros
#224
1 = most expensive

Orlando homeowners pay roughly $2,850 to $6,850 to pave a driveway at 600 sq ft, or $4.65 to $11 per sq ft (permit not included). Against the US midpoint, Orlando is 7% lower. Paving, surfacing and tamping equipment operators earn a median of $22.78 an hour in the Orlando area, 11% below the US median of $25.64.

Estimate your asphalt driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full new driveway: base, 2-3 in of hot mix, edging

Add-ons

Estimated cost for 600 sq ft in Orlando, FL, standard level

$4,050 to $5,650

About $6.60 to $9.15 per sq ft before permits. Labor is about 38% of the bill.

Cost breakdown
PartLowHigh
Materials$2,500$3,250
Labor$1,450$2,250
Permits and fees$95$160
Total$4,050$5,650
Save and get a PDF report

Cost breakdown for 600 sq ft in Orlando, FL

Part of the jobLowMidpointHighShare
Materials$1,900$2,850$3,80059%
Labor$890$1,850$2,80038%
Permits and fees$50$130$2003%
Total$2,850$4,850$6,850100%

Where the Orlando price comes from

The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $22.78 an hour. Add the other trades involved and the blended wage index for Orlando is 0.87 (US = 1.00), which puts labor at 38% of the total.

On the materials line, the BEA goods price index for the Orlando metro is 96.2 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (101.4) and land at $50 to $200.

Why two Orlando quotes can differ

  • Sealcoating

    Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.

  • New versus overlay

    Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

  • Base work

    Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

Pick a size, pick a tier: asphalt driveway pricing in Orlando

Three bands are cut from the same cited range and localized for Orlando wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$2,850 to $4,450

New topcoat over a sound base, flat lot

Standard

$4,050 to $5,650

Full new driveway: base, 2-3 in of hot mix, edging

Premium

$5,250 to $6,850

Full tear-out and rebuild, drainage work, heavy-duty depth

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,150 – $1,850$1,650 – $2,350$2,200 – $2,850
20x20 (400 sq ft)$1,900 – $3,000$2,750 – $3,800$3,550 – $4,650
2-car (20x30), 600 sq ft$2,850 – $4,450$4,050 – $5,650$5,250 – $6,850
long rural (10x100), 1,000 sq ft$4,700 – $7,350$6,650 – $9,300$8,650 – $11,300

When to schedule asphalt driveway in Orlando

We use NOAA's 1991-2020 climate normals for Orlando Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

October through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Orlando (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.

Orlando gets about 51 inches of precipitation in a normal year. The wettest months are June, July and August (8.1 inches in June). Inside the workable window, February and November are the driest, at 2.0 and 1.8 inches. The station averages about 110 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Orlando Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan72502.5Workable
Feb75522.0Workable
Mar79563.0Workable
Apr84612.6Workable
May88664.0Workable
Jun91728.1Hot
Jul92737.5Hot
Aug92747.7Hot
Sep90726.4Hot
Oct85663.5Workable
Nov78581.8Workable
Dec74532.5Workable

Is Orlando cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $4,750 to $4,850 across Orlando and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Orlando, FLthis page$2,850 – $6,850$4,850
Lakeland, FL40 miles$2,800 – $6,650$4,750−2%
Palm Bay, FL40 miles$2,850 – $6,850$4,850level
Deltona, FL50 miles$2,850 – $6,900$4,850+1%
Ocala, FL65 miles$2,800 – $6,700$4,750−2%
Sebastian, FL70 miles$2,850 – $6,900$4,850+1%
Florida (statewide)$2,900 – $6,950$4,900+2%
United States$3,050 – $7,400$5,250+8%

Across 300 US metros, Orlando comes in at #224 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Orlando is 1% below the Florida figure.

Other Florida metros

Florida metros compared with Orlando
MetroSizeRangeMidpointvs. here
Miami, FL2,819,940 jobs$3,050 – $7,250$5,150+6%
Tampa, FL1,447,120 jobs$2,850 – $6,850$4,850level
Jacksonville, FL765,930 jobs$2,850 – $6,850$4,850level
North Port, FL339,940 jobs$2,850 – $6,950$4,900+1%
Cape Coral, FL304,790 jobs$2,850 – $6,850$4,850level
Lakeland, FL265,280 jobs$2,800 – $6,650$4,750−2%

Cities with a workforce like Orlando's

Big cities and small ones price differently, so here is Orlando against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Tampa, FL1,447,120 jobs$2,850 – $6,850$4,850level
Charlotte, NC1,358,370 jobs$2,900 – $6,950$4,900+2%
San Diego, CA1,538,060 jobs$3,500 – $8,600$6,050+25%
Baltimore, MD1,356,680 jobs$3,150 – $7,650$5,400+12%

Related projects, priced for Orlando

Because every project leans on different trades, Orlando's wage level does not move all prices equally. Against the US midpoint, French drain runs −8% and concrete driveway −12%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,250 – $8,100−12%
Gravel driveway1,000 sq ft$2,250 – $9,300−9%
Paver patio300 sq ft$2,700 – $4,950−10%
French drain60 linear ft$550 – $1,950−8%
Concrete slab400 sq ft$2,200 – $4,800−8%
Concrete patio300 sq ft$1,150 – $3,600−9%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Orlando is 0.87 times the national level.

For paving, surfacing and tamping equipment operators (47-2071, weighted 40%) the local median is $22.78 an hour, which is 11% below the national $25.64. The middle half of them earn between $18.79 and $26.44 an hour. BLS counts 370 of them working in the area, 2.6 for every 10,000 jobs (US: 2.7), so the local bench is about average.

Construction laborers (47-2061), 30% of the weighting: a median of $19.66 an hour, 13% below the US median of $22.66. The middle half of them earn between $17.62 and $22.55 an hour. About 12,290 work in the metro. That is 87.1 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $24.53 an hour, which is 15% below the national $28.78. The middle half of them earn between $22.61 and $27.47 an hour. BLS counts 4,330 of them working in the area, 30.7 for every 10,000 jobs (US: 30.7), so the local bench is about average.

Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($26.44 an hour) instead of the median, the labor line grows by about $120. At the 25th percentile ($18.79) it shrinks by about $130. The total moves by 2.5% or 2.7%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 1,411,730 jobs in the Orlando-Kissimmee-Sanford area. That makes it the 20th largest of the 300 metros we cover, with 0.91% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Paving, surfacing and tamping equipment operators (47-2071)40%$18.79$22.78$26.44$25.640.89metro
Construction laborers (47-2061)30%$17.62$19.66$22.55$22.660.87metro
Operating engineers and other construction equipment operators (47-2073)30%$22.61$24.53$27.47$28.780.85metro
Blended100%0.87

Extras that change the Orlando total

Extras are quoted nationally and then scaled to Orlando by the average of the local wage index (0.87) and goods index (0.96), a factor of 0.92. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add a sealcoat$550 – $1,100

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,050 to $5,650 for Orlando, FL is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Orlando, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Asphalt driveway in Orlando: your questions

+How much does it cost to pave a driveway in Orlando?

For 600 sq ft, expect $2,850 to $6,850 in the Orlando area. A standard-spec job lands at $4,050 to $5,650. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for asphalt driveway in Orlando?

About $4.65 to $11 per sq ft for materials and labor, plus $50 to $200 for the permit if one is needed. The US range is $5 to $12.

+Is asphalt driveway cheaper in Orlando or Lakeland?

Lakeland is 40 miles away. The midpoint for 600 sq ft there is $4,750, which is 2% less than Orlando ($4,850). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Orlando?

About 38% at the midpoint, or $1,850 out of $4,850. Materials are 59% and permits 3%. Nationally, labor is 41%.

+What would 2-car (20x30), 600 sq ft cost in Orlando?

$2,850 to $6,850. Pick a different size in the estimator above to get your own number.

+Does asphalt driveway need a permit in Orlando?

Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $200 for fees in the Orlando area (our national range of $50 to $200 scaled by the local price level).

+Is Orlando expensive for asphalt driveway compared with the rest of Florida?

Orlando is 1% below the Florida statewide estimate ($4,900 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.

+What do paving, surfacing and tamping equipment operators earn in Orlando?

The BLS median is $22.78 an hour in the Orlando area, compared with $25.64 nationally. The 25th to 75th percentile range is $18.79 to $26.44.

+What do basic and premium asphalt driveway work cost in Orlando?

For 600 sq ft, basic work runs $2,850 to $4,450 and premium work $5,250 to $6,850. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.

+When is the best time to pave a driveway in Orlando?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add a sealcoat" add in Orlando?

$550 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.

Asphalt driveway near Orlando

Asphalt driveway: all pricesAsphalt driveway in FloridaAll projects in OrlandoFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.