Asphalt driveway cost in Bakersfield, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,550 – $8,800
- Per sq ft
- $5.80 – $14.50
- before permit
- Versus US midpoint
- +18%
- US $5,250
- Rank of 300 metros
- #27
- 1 = most expensive
An asphalt driveway in Bakersfield, CA usually costs $3,550 to $8,800 for 600 sq ft. That works out to about $5.80 to $14.50 per sq ft before permits. Compared with the national midpoint that is $940 more. Paving, surfacing and tamping equipment operators earn a median of $39.97 an hour in the Bakersfield area, 56% above the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Bakersfield, CA, standard level
$5,100 to $7,200
About $8.35 to $12 per sq ft before permits. Labor is about 47% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,700 | $3,550 |
| Labor | $2,300 | $3,500 |
| Permits and fees | $95 | $160 |
| Total | $5,100 | $7,200 |
Cost breakdown for 600 sq ft in Bakersfield, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $3,100 | $4,150 | 51% |
| Labor | $1,400 | $2,900 | $4,450 | 47% |
| Permits and fees | $50 | $130 | $200 | 2% |
| Total | $3,550 | $6,150 | $8,800 | 100% |
Where the Bakersfield price comes from
Labor is 47% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Bakersfield the blended ratio comes out at 1.37. BLS does not publish this trade for the metro, so we used the California statewide median.
Materials are scaled with BEA's regional price parity for goods. Bakersfield is at 105.2 against 100 for the US, so a materials line of $2,950 nationally becomes $3,100 here (midpoint, 600 sq ft). Permits follow the all-items index of 100.9: $50 to $200.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Bakersfield. The wage table below marks each row.
Is Bakersfield cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Bakersfield. Visalia is the lowest at about $5,850 (midpoint, 600 sq ft), 60 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bakersfield, CAthis page | $3,550 – $8,800 | $6,150 | |
| Visalia, CA60 miles | $3,400 – $8,350 | $5,850 | −5% |
| Oxnard, CA70 miles | $3,600 – $8,950 | $6,300 | +2% |
| Los Angeles, CA90 miles | $3,650 – $9,200 | $6,450 | +4% |
| Santa Maria, CA95 miles | $3,550 – $8,900 | $6,200 | +1% |
| San Luis Obispo, CA95 miles | $3,550 – $8,950 | $6,250 | +1% |
| California (statewide) | $3,650 – $9,100 | $6,350 | +3% |
| United States | $3,050 – $7,400 | $5,250 | −15% |
Out of the 300 metros we cover, Bakersfield ranks #27 for the cost of this job (#1 is the most expensive). Statewide, Bakersfield is 3% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $3,650 – $9,200 | $6,450 | +4% |
| San Francisco, CA | 2,373,920 jobs | $4,100 – $10,600 | $7,350 | +19% |
| Riverside, CA | 1,716,760 jobs | $3,800 – $9,800 | $6,800 | +11% |
| San Diego, CA | 1,538,060 jobs | $3,500 – $8,600 | $6,050 | −2% |
| San Jose, CA | 1,134,970 jobs | $3,850 – $9,850 | $6,850 | +11% |
| Sacramento, CA | 1,080,590 jobs | $3,650 – $9,150 | $6,400 | +4% |
Metros of a similar size
Big cities and small ones price differently, so here is Bakersfield against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| El Paso, TX | 339,120 jobs | $2,650 – $6,350 | $4,500 | −27% |
| Harrisburg, PA | 335,010 jobs | $3,100 – $7,500 | $5,300 | −14% |
| North Port, FL | 339,940 jobs | $2,850 – $6,950 | $4,900 | −21% |
| Oxnard, CA | 323,890 jobs | $3,600 – $8,950 | $6,300 | +2% |
Asphalt driveway: what moves the price in Bakersfield
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
Bakersfield: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Bakersfield. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$3,550 to $5,650
New topcoat over a sound base, flat lot
Standard
$5,100 to $7,200
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$6,700 to $8,800
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,450 – $2,300 | $2,100 – $3,000 | $2,750 – $3,650 |
| 20x20 (400 sq ft) | $2,350 – $3,800 | $3,450 – $4,850 | $4,500 – $5,950 |
| 2-car (20x30), 600 sq ft | $3,550 – $5,650 | $5,100 – $7,200 | $6,700 – $8,800 |
| long rural (10x100), 1,000 sq ft | $5,850 – $9,300 | $8,450 – $11,900 | $11,100 – $14,500 |
Bakersfield weather and the asphalt driveway calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Bakersfield Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Bakersfield are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Bakersfield gets about 6 inches of precipitation in a normal year. The wettest months are January, February and March (1.2 inches in January). Inside the workable window, May and October are the driest, at 0.3 and 0.3 inches. The station averages about 112 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 41 | 1.2 | Workable |
| Feb | 64 | 43 | 1.2 | Workable |
| Mar | 70 | 47 | 1.1 | Workable |
| Apr | 76 | 51 | 0.6 | Workable |
| May | 84 | 58 | 0.3 | Workable |
| Jun | 92 | 65 | 0.1 | Hot |
| Jul | 98 | 71 | 0.0 | Hot |
| Aug | 97 | 70 | 0.0 | Hot |
| Sep | 91 | 65 | 0.1 | Hot |
| Oct | 80 | 55 | 0.3 | Workable |
| Nov | 67 | 45 | 0.5 | Workable |
| Dec | 59 | 40 | 1.1 | Workable |
Related projects, priced for Bakersfield
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Bakersfield wage and price inputs. Compared with national midpoints, French drain comes out highest (+18%) and concrete slab lowest (+7%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,950 – $10,100 | +9% |
| Gravel driveway | 1,000 sq ft | $2,900 – $11,700 | +15% |
| Paver patio | 300 sq ft | $3,350 – $6,050 | +11% |
| French drain | 60 linear ft | $710 – $2,450 | +18% |
| Concrete slab | 400 sq ft | $2,650 – $5,550 | +7% |
| Concrete patio | 300 sq ft | $1,350 – $4,300 | +8% |
Optional extras in Bakersfield
Add-ons start from national price ranges and are scaled by 1.21 for Bakersfield, which is the average of the area's wage index (1.37) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $730 – $1,450 |
What local crews earn in Bakersfield
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bakersfield the blend is 1.37.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Bakersfield metro, so we used the California statewide median: $39.97 an hour against $25.64 for the US. The middle half of them earn between $30.90 and $60.89 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $26.83 an hour, which is 18% above the national $22.66. The middle half of them earn between $22.25 and $35.76 an hour. BLS counts 1,480 of them working in the area, 43.8 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $37.48 an hour, 30% above the US median of $28.78. The middle half of them earn between $29.30 and $53.89 an hour. About 1,000 work in the metro. That is 29.6 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $700 to the midpoint estimate; the 25th percentile takes off about $300. That is a swing of roughly 4.9% to 11.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bakersfield-Delano has 338,230 jobs in total (BLS, May 2025), ranking 77th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $30.90 | $39.97 | $60.89 | $25.64 | 1.56 | state |
| Construction laborers (47-2061) | 30% | $22.25 | $26.83 | $35.76 | $22.66 | 1.18 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $29.30 | $37.48 | $53.89 | $28.78 | 1.30 | metro |
| Blended | 100% | 1.37 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,100 to $7,200 for Bakersfield, CA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Bakersfield, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Bakersfield: your questions
+How much does it cost to pave a driveway in Bakersfield?
For 600 sq ft, expect $3,550 to $8,800 in the Bakersfield area. A standard-spec job lands at $5,100 to $7,200. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Bakersfield?
About $5.80 to $14.50 per sq ft for materials and labor, plus $50 to $200 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Bakersfield or Visalia?
Visalia is 60 miles away. The midpoint for 600 sq ft there is $5,850, which is 5% less than Bakersfield ($6,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bakersfield?
About 47% at the midpoint, or $2,900 out of $6,150. Materials are 51% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Bakersfield?
$3,550 to $8,800. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Bakersfield?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $200 for fees in the Bakersfield area (our national range of $50 to $200 scaled by the local price level).
+Is Bakersfield expensive for asphalt driveway compared with the rest of California?
Bakersfield is 3% below the California statewide estimate ($6,350 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Bakersfield?
BLS has no published metro figure here, so we use the statewide median of $39.97 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $30.90 to $60.89.
+What do basic and premium asphalt driveway work cost in Bakersfield?
For 600 sq ft, basic work runs $3,550 to $5,650 and premium work $6,700 to $8,800. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Bakersfield?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Bakersfield?
$730 to $1,450 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Bakersfield
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.