Wood fence cost in Clarksville, TN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $2,750 – $7,000
- Per linear ft
- $18 – $45.50
- before permit
- Versus US midpoint
- −9%
- US $5,350
- Rank of 300 metros
- #233
- 1 = most expensive
Local price for a wood fence in the Clarksville area: $2,750 to $7,000 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Carpenters earn a median of $23.60 an hour in the Clarksville area, 19% below the US median of $29.12.
Estimate your wood fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Clarksville, TN, standard level
$4,000 to $5,700
About $26.50 to $37.50 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,300 | $3,450 |
| Labor | $1,650 | $2,150 |
| Permits and fees | $65 | $110 |
| Total | $4,000 | $5,700 |
Cost breakdown for 150 linear ft in Clarksville, TN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,450 | $2,900 | $4,350 | 59% |
| Labor | $1,250 | $1,900 | $2,550 | 39% |
| Permits and fees | $35 | $85 | $140 | 2% |
| Total | $2,750 | $4,850 | $7,000 | 100% |
What is behind the Clarksville number
Labor is 39% of the midpoint bill here, against 42% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (40%). We weight each trade's local median wage by that share and compare it with the national median. In Clarksville the blended ratio comes out at 0.84.
Materials are scaled with BEA's regional price parity for goods. Clarksville is at 96.2 against 100 for the US, so a materials line of $3,000 nationally becomes $2,900 here (midpoint, 150 linear ft). Permits follow the all-items index of 90.9: $35 to $140.
Related projects, priced for Clarksville
Jobs that often go together with wood fence are priced below at their usual sizes, using the same Clarksville wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−6%) and chain-link fence lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,550 | −6% |
| Chain-link fence | 150 linear ft | $1,400 – $5,500 | −10% |
| Aluminum fence | 150 linear ft | $3,450 – $10,400 | −9% |
| Wood deck | 300 sq ft | $6,800 – $13,700 | −10% |
The best months for wood fence in Clarksville
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Clarksville Wwtp (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Clarksville are September through June: 10 of 12. Outside them, July and August have an average daytime high of 90°F or more.
Clarksville gets about 54 inches of precipitation in a normal year. The wettest months are April, May and December (5.6 inches in May). Inside the workable window, January and September are the driest, at 4.0 and 3.4 inches. The station averages about 57 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 47 | 28 | 4.0 | Workable |
| Feb | 52 | 31 | 4.5 | Workable |
| Mar | 61 | 38 | 4.8 | Workable |
| Apr | 72 | 47 | 5.0 | Workable |
| May | 79 | 57 | 5.6 | Workable |
| Jun | 87 | 65 | 4.7 | Workable |
| Jul | 90 | 69 | 4.6 | Hot |
| Aug | 90 | 67 | 3.7 | Hot |
| Sep | 84 | 60 | 3.4 | Workable |
| Oct | 72 | 48 | 4.3 | Workable |
| Nov | 60 | 37 | 4.1 | Workable |
| Dec | 50 | 31 | 4.9 | Workable |
Clarksville against nearby metros and the rest of Tennessee
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $4,800 to $5,350 across Clarksville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Clarksville, TNthis page | $2,750 – $7,000 | $4,850 | |
| Nashville, TN65 miles | $2,900 – $7,300 | $5,100 | +5% |
| Bowling Green, KY70 miles | $2,800 – $7,100 | $4,950 | +2% |
| Evansville, IN95 miles | $3,100 – $7,650 | $5,350 | +10% |
| Jackson, TN95 miles | $2,750 – $7,000 | $4,900 | level |
| Huntsville, AL140 miles | $2,700 – $6,900 | $4,800 | −2% |
| Tennessee (statewide) | $2,800 – $7,150 | $4,950 | +2% |
| United States | $3,050 – $7,650 | $5,350 | +10% |
Out of the 300 metros we cover, Clarksville ranks #233 for the cost of this job (#1 is the most expensive). Statewide, Clarksville is 2% below the Tennessee figure.
Elsewhere in Tennessee
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Nashville, TN | 1,099,300 jobs | $2,900 – $7,300 | $5,100 | +5% |
| Memphis, TN | 611,670 jobs | $2,800 – $7,100 | $4,950 | +2% |
| Knoxville, TN | 424,600 jobs | $2,800 – $7,150 | $5,000 | +2% |
| Chattanooga, TN | 268,750 jobs | $2,800 – $7,050 | $4,900 | +1% |
| Kingsport, TN | 119,560 jobs | $2,750 – $7,050 | $4,900 | +1% |
| Jackson, TN | 84,530 jobs | $2,750 – $7,000 | $4,900 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Clarksville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charleston, WV | 103,450 jobs | $2,800 – $7,150 | $5,000 | +2% |
| Lafayette, IN | 102,200 jobs | $3,000 – $7,550 | $5,300 | +8% |
| Gainesville, GA | 103,870 jobs | $2,650 – $6,850 | $4,750 | −3% |
| Lake Charles, LA | 101,690 jobs | $2,700 – $6,850 | $4,800 | −2% |
Who does the work: Clarksville trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Clarksville the blend is 0.84.
Carpenters (47-2031), 60% of the weighting: a median of $23.60 an hour, 19% below the US median of $29.12. The middle half of them earn between $21.48 and $28.68 an hour. About 290 work in the metro. That is 28.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $20.17 an hour, which is 11% below the national $22.66. The middle half of them earn between $17.68 and $23.18 an hour. BLS counts 620 of them working in the area, 60.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $240 to the midpoint estimate; the 25th percentile takes off about $100. That is a swing of roughly 2.0% to 4.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Clarksville has 103,220 jobs in total (BLS, May 2025), ranking 200th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $21.48 | $23.60 | $28.68 | $29.12 | 0.81 | metro |
| Construction laborers (47-2061) | 40% | $17.68 | $20.17 | $23.18 | $22.66 | 0.89 | metro |
| Blended | 100% | 0.84 | |||||
Optional extras in Clarksville
Add-ons start from national price ranges and are scaled by 0.90 for Clarksville, which is the average of the area's wage index (0.84) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
Why two Clarksville quotes can differ
Wood species
A 6-ft privacy fence is $25-$50 per linear foot installed; an 8-ft one goes up to $75. Tropical hardwood privacy fences run $35-$55 (HomeGuide).
Style
Split-rail and picket styles are cheaper to build than privacy fence, which uses more boards and takes more labor.
Height and permits
Fences over about 6 ft often need a permit and a setback check. Permits run $40-$150.
Cost by quality level and size in Clarksville
The cited range is split into basic, standard and premium bands, then scaled to Clarksville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$2,750 to $4,450
Pine pickets or split rail, 4 ft
Standard
$4,000 to $5,700
6-ft cedar or treated privacy fence
Premium
$5,300 to $7,000
Premium hardwood or 8-ft privacy fence
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,850 – $3,000 | $2,700 – $3,850 | $3,550 – $4,700 |
| 150 ft (150 linear ft) | $2,750 – $4,450 | $4,000 – $5,700 | $5,300 – $7,000 |
| 200 ft (200 linear ft) | $3,650 – $5,900 | $5,350 – $7,600 | $7,050 – $9,300 |
| full lot (300 linear ft) | $5,450 – $8,800 | $7,950 – $11,300 | $10,500 – $13,900 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,000 to $5,700 for Clarksville, TN is attached.
Detailed wood fence report for Clarksville, TN, $9
Multi-page report for Clarksville, TN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Wood fence in Clarksville: your questions
+How much does it cost to install a wood fence in Clarksville?
For 150 linear ft, expect $2,750 to $7,000 in the Clarksville area. A standard-spec job lands at $4,000 to $5,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for wood fence in Clarksville?
About $18 to $45.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $20 to $50.
+Is wood fence cheaper in Clarksville or Nashville?
Nashville is 65 miles away. The midpoint for 150 linear ft there is $5,100, which is 5% more than Clarksville ($4,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Clarksville?
About 39% at the midpoint, or $1,900 out of $4,850. Materials are 59% and permits 2%. Nationally, labor is 42%.
+What would 200 ft (200 linear ft) cost in Clarksville?
$3,650 to $9,300. Pick a different size in the estimator above to get your own number.
+Does wood fence need a permit in Clarksville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Clarksville area (our national range of $40 to $150 scaled by the local price level).
+Is Clarksville expensive for wood fence compared with the rest of Tennessee?
Clarksville is 2% below the Tennessee statewide estimate ($4,950 at the midpoint). We cover 8 metros in Tennessee; see the state page to compare them.
+What do carpenters earn in Clarksville?
The BLS median is $23.60 an hour in the Clarksville area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.48 to $28.68.
+What do basic and premium wood fence work cost in Clarksville?
For 150 linear ft, basic work runs $2,750 to $4,450 and premium work $5,300 to $7,000. Basic means: pine pickets or split rail, 4 ft. Premium means: premium hardwood or 8-ft privacy fence.
+When is the best time to install a wood fence in Clarksville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. January and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Clarksville?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Wood fence near Clarksville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Wood Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020